FZ/T 01090-2008 English PDFFZ/T 01090: Historical versions
Basic dataStandard ID: FZ/T 01090-2008 (FZ/T01090-2008)Description (Translated English): Textiles. Woven fabrics. Construction. Methods of analysis. Methods for the presentation of a weave diagram and plans for drafting, denting and lifting Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W04 Classification of International Standard: 59.080.30 Word Count Estimation: 7,759 Date of Issue: 2008-04-23 Date of Implementation: 2008-10-01 Older Standard (superseded by this standard): FZ/T 01090-1999 Quoted Standard: GB/T 8683 Adopted Standard: ISO 7211-1-1984, MOD Regulation (derived from): NDRC Notice No. 28 of 2008 Issuing agency(ies): National Development and Reform Commission of the People's Republic of China Summary: This standard specifies the woven fabric structure analysis methods described organization chart, heald figure, wearing a box diagram and mention comprehensive diagram representation and the relationship between them, and provides a pattern matching loop yarn regular arrangement of expression. This standard applies to all fabrics, including complex weave fabric. FZ/T 01090-2008: Textiles. Woven fabrics. Construction. Methods of analysis. Methods for the presentation of a weave diagram and plans for drafting, denting and lifting---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Textiles.Woven fabrics.Construction.Methods of analysis.Methods for the presentation of a weave diagram and plans for drafting, denting and lifting ICS 59.080.30 W04 People's Republic of China textile industry standards Replacing FZ/T 01090-1999 Woven fabric structure analysis method Map and heald weave, denting and lifting Comprehensive graphs display method (ISO 7211-1. 1984, MOD) Posted 2008-04-23 2008-10-01 implementation National Development and Reform Commission, People's Republic of China released ForewordThis revised standard adopts ISO 7211-1. 1984 "textile fabric structure analysis machines - Part 1. organization chart and wear fabric Comprehensive, representation "denting and lifting mechanized map. This standard is based on ISO 7211-1. 1984 redrafted, and ISO 7211-1. 1984 The main differences are as follows. 1. Remove the preface; 2. Note on the scope of the procedure as Chapter 6 Note; 3. Normative references are replaced by the corresponding international standards to national standards; 4. Complete descriptions and examples for mentioning Fully map. Instead of the standard FZ/T 01090-1999 "woven fabrics structure analysis method and heald weave diagram, denting and lifting mechanized graph showing method". Compared with this standard FZ/T 01090-1999, the main changes the following technical content. 1. Chapter 4 of the original contents are incorporated step from the original seven chapters adjusted to chapters; 2. 7.3 original content as the note is hereby incorporated in Chapter 6. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized. This standard was drafted. Textile Industry Research Institute of Standardization. The main drafters of this standard. Zheng Yuying. This standard was first published in 1988, the standard number is GB/T 8677 - 1988, 1999 Adjustment for the textile industry standard, numbered FZ/T 01090-1999, this is the first revision. Woven fabric structure analysis method Map and heald weave, denting and lifting Comprehensive graphs display method1 ScopeThis standard specifies the method of analysis of the organizational structure of woven fabric, describes the organization chart, heald map, denting and lifting diagram representation in FIG Fully And the relationship between them, and provides a method of expressing a regular arrangement pattern yarn color cycle. This standard applies to all of the woven fabric, including complex weave fabric.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8683 definition of general terms and basic woven fabrics Organization (GB/T 8683-1988, eqv ISO 3572. 1976) Principle 3 Between them represent the fabric of the organization chart in the artistic conception of paper (graph paper), the heald maps, charts and denting mention mechanized map (see GB/T 8683) and Relationship, yarn arrangement pattern color cycle regularity representation using the list method.4 Materials and Appliances4.1 artistic conception of paper. Magnifier 4.2, such as fabric analysis mirror. 4.3 tweezers. 4.4 scissors. 4.5 Analysis of the needle.5 SampleSelect a sample containing a number of weave from the fabric. Step 6 6.1 Analysis Identification of the fabric sides and latitude and longitude to determine ravel direction. Removal yarn two vertical sides of the specimen, exposing about 1cm long yarn tassel. Analysis with a needle (4.5) parallel to the slide yarn yarn tassels, in accordance with 6.2 Record organization points. Continuous yarn successively set aside to observe and record the circumstances of each interwoven yarns from the fabric until you have a complete organization. If desired, the fabric of superficial burning and minor trim to improve the clarity of the organization points. Note. For simple organization and organizations sparse fabric, the fabric does not need to break down, can be used direct observation or magnifying glass (4.2) observed warp yarns interlace law. Press 6.2,6.3,6.4 and 6.5 recording cycle organization, heald, denting and lifting mechanized FIG. If necessary, press record 6.6 warp and weft Order. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 01090-2008_English be delivered?Answer: Upon your order, we will start to translate FZ/T 01090-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 01090-2008_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01090-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 01090-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01090-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
