FZ/T 01063-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 01063-2008: Coated fabrics. Determination of blocking resistance Status: Valid FZ/T 01063: Historical versions
Basic dataStandard ID: FZ/T 01063-2008 (FZ/T01063-2008)Description (Translated English): Coated fabrics. Determination of blocking resistance Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W57 Classification of International Standard: 59.080.40 Word Count Estimation: 5,597 Date of Issue: 2008-03-12 Date of Implementation: 2008-09-01 Older Standard (superseded by this standard): FZ/T 01063-1999 Quoted Standard: GB 6529 Adopted Standard: ISO 5978-1990, MOD Regulation (derived from): NDRC Notice No. 25 of 2008 Issuing agency(ies): National Development and Reform Commission of the People's Republic of China Summary: This standard specifies the coated fabrics Determination of blocking resistance method. This standard applies to all types of coated fabrics. If you wish to use other than specified in this standard test conditions can be negotiated by the parties to the contract, but it should be described in the test report the difference. FZ/T 01063-2008: Coated fabrics. Determination of blocking resistance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Coated fabrics. Determination of blocking resistance ICS 59.080.40 W57 People's Republic of China textile industry standards Replacing FZ/T 01063-1999 Determination of anti-adhesive coated fabric (ISO 5978.1990, Rubber-orplastics-coatedfabrics- Determinationofblockingresistance, MOD) Posted 2008-03-12 2008-09-01 implementation National Development and Reform Commission, People's Republic of China released ForewordThis revised standard adopts ISO 5978.1990 "Rubber or plastic coated fabrics - Determination of anti-blocking properties." This standard is based on ISO 5978.1990 re-drafting, and ISO 5978.1990 is the main differences. 1) Normative documents in international standards replace national standards. 2) The term "adhesive" is defined as supplemented. 3) the principle part of the increase, followed by chapter number successively postponed. 4) increased "If we can prove that the humidity had no significant effect on the results, you can not carry out the humidity" requirement. 5) refinement of the stacked combination of the sample. 6) increase "In five contact surfaces 6 samples in blocking the most severe assessment of the situation, as the test result" requirement. Instead of the standard FZ/T 01063-1999 "coated fabric blocking resistance measurement method." This standard FZ/T 01063-1999 compared to the main changes are as follows. 1) Remove the method B "Fast Pressing law." 2) an increase of normative references. 3) amend the relevant provisions of the production and testing intervals. 4) sample size and the length and width of the glass to "150mm × 150mm". 5) increases the humidity of the sample program. Quality 6) by weight "2kg" to "5.0kg". 7) Sample time in the oven from the "6h" to "3h". 8) cooling the sample time from "30min" to "1h". The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized. This standard was drafted. Textile Industry Standardization Institute, Hangzhou Paradise Umbrella Group Co., Ltd., Zhejiang Hongye umbrella Co., Ltd., State Textile Co., Ltd. Nissin. The main drafters of this standard. INDUSTRY AND Ran Wen, Chen Lei, Yucheng Rong, Lvshi Liang. 1999, this is the first revision. Determination of anti-adhesive coated fabric1 ScopeThis standard specifies the method for determination of coated fabric blocking resistance. This standard applies to all types of coated fabrics. If you wish to use is different from the other test conditions specified in this standard, by the parties to the contract can be co Suppliers determined, but should explain the differences in the test report.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 6529 textiles conditioning and testing - Standard atmospheres3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Between the surface of the coating or coating the surface of the coated fabric and fabric surface, as well as with other materials generated between the surface adhesion. Principle 4 Coated fabric samples are overlapped, subjected to certain heating time, pressure, and then observed to separate the laminate, the degree of adhesion between the laminate, To assess the anti-adhesion properties of coated fabrics.5 device5.1 glass plate, a size of about 150mm × 150mm × 3mm. 5.2 weight, the quality of 5.0kg. 5.3 air oven, the sample size should component not exceeding 10% of the total volume of space inside the oven. The sample is placed on the shelf components, each Between the sample components and assembly and the oven wall distance of not less than 50mm. Heat source should be placed for the outlet of the oven. Should be controlled oven Flow rate of air, so that the oven at least six air changes per hour. Respond oven temperature control, so that a combination of the sample is maintained at a predetermined temperature Within ± 2 ℃. Need baffles should be used to prevent overheating or dead situation. Interval 6 production and testing 6.1 In all cases, between production and test shall be separated by at least 16h. 6.2 For internal quality control tests should be between the production and test up to four weeks apart, should be used to compare the test as far as possible in the same room After the test interval time. For the interval between 6.3 product testing, production and test should not be more than three months, or two months after the user receives the goods carried within test.7 samples and specimensSamples were taken at a distance of 7.1 per volume of fabric at the ends of at least 1m. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 01063-2008_English be delivered?Answer: Upon your order, we will start to translate FZ/T 01063-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 01063-2008_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01063-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 01063-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01063-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
