FZ/T 01032-2012 English PDF

US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01032-2012: Test method of seam damage in fabrics and textile products
Status: Valid

FZ/T 01032: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 01032-2012	179	Add to Cart	3 days	Test method of seam damage in fabrics and textile products	Valid
FZ/T 01032-1993	319	Add to Cart	3 days	Test Method of Seam Damage in Fabrics and Textile Products	Obsolete

Similar standards

FZ/T 01031   GB/T 251   GB/T 730   FZ/T 01026   FZ/T 01030   FZ/T 01028   

Basic data

Standard ID: FZ/T 01032-2012 (FZ/T01032-2012)
Description (Translated English): Test method of seam damage in fabrics and textile products
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W04
Classification of International Standard: 59.080.30
Word Count Estimation: 7,774
Older Standard (superseded by this standard): FZ/T 01032-1993
Quoted Standard: GB/T 24118; GB/T 8629-2001
Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall)
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the fabric and sewing products processing caused by the sewing injury determination. This standard applies to all types of fabrics and products.

FZ/T 01032-2012: Test method of seam damage in fabrics and textile products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of seam damage in fabrics and textile products ICS 59.080.30 W04 People's Republic of China textile industry standards Replacing FZ/T 01032-1993 Test Method for fabrics and sewing articles Injury Issued on. 2012-12-28 2013-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard FZ/T 01032-1993 "Determination of fabrics and sewing articles injuries." Compared with this standard FZ/T 01032-1993, the main changes are as follows. --- Expand the scope of the woven fabric and weft knitted fabric and sewing products to various types of fabrics and products (see Chapter 1); --- Normative references deleted rounding off rules cited documents, with GB/T 24118 "Textiles stitch pattern points Categories and terminology "instead of GB 4515" stitch Classification and Terminology "(see Chapter 2); --- Deleted the original standard gauge Chapter 3 stitches and stitching capacity term (see Chapter 3); --- Modify the original standard Chapters 5 and 7 sewing speed parameters (see 5.1 and 7.1.1.2); --- Clear washing and drying conditions of the original standard procedures in Chapter 7 of the sample (see 7.2); --- Simplify the original standard Chapters 7 and 8 is (see Chapter 7) Chapter; --- Deleted the original standard calculation method in Chapter 9 for non-arbitrability of the survey and simplifies the calculation method of sewing injury (see Chapter 8); --- Simplifies the content of the original standard Chapter 10 should be noted in the test report (see Chapter 9). The standard proposed by China Textile Industry Association. The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized. This standard was drafted. National Textile Products Quality Supervision and Inspection Center, Hangzhou Paradise Umbrella Group Co., Ltd. The main drafters of this standard. Wang Changping, Baojun, Guo Yue, Gong Shu large. This standard replaces the standards previously issued as follows. --- FZ/T 01032-1993. Test Method for fabrics and sewing articles Injury

1 Scope

This standard specifies the fabric and sewing products caused by the sewing process and sewing injury determination. This standard applies to all types of fabrics and products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 24118 Textiles stitch pattern classification and terminology GB/T 8629-2001 Textiles - Domestic washing and drying test procedures

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Suture assembly sewingcombinations Several layers of fabric sewn together by the group in the direction of the suture, stitch type, stitch density, the type of sewing thread and thread density content expressed in Fit. 3.2 Sewing damage seamdamage After sewing the fabric, resulting in partial or complete rupture of yarn and fiber melted by the phenomenon through the fabric of the sewing needle. 3.3 Damaged yarn damagedthread At least half of the fabric fiber breakage or melted by the sewing yarn caused. 3.4 Damaged needles numberofdamagedpinhole The number of pinholes melting, partial rupture or complete rupture of the fabric appear phenomena such as warp fibers or yarns after sewing by the sewing result. Principle 4 Stitched into the fabric according to a predetermined condition suture assembly, stapling or cutting assembly taken to meet the requirements from the fabric article, the method specified then wash Fandi. The suture assembly removed sewing thread, count the number of stitches and damage to the number of stitches and damage to the yarn count and the total number of yarns within a certain length, by calculating Available Sewing injury.

5 Equipment and Materials

5.1 sewing machine stitching assembly, according to 7.1.2 can meet the requirements prescribed conditions sewing, sewing needle speed should be 3000/min ~ 4000 needle/min. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 01032-2012_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 01032-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 01032-2012_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 01032-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 01032-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01032-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.