DZ/T 0276.26-2015 English PDF

US$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
DZ/T 0276.26-2015: Regulation for testing the physical and mechanical properties of rock. Part 26: Test for determining the deformation of rock mass(Bearing plate method)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
DZ/T 0276.26-2015	289	Add to Cart	3 days	Regulation for testing the physical and mechanical properties of rock. Part 26: Test for determining the deformation of rock mass(Bearing plate method)	Valid

Similar standards

DZ/T 0216   GB/T 23249   GB/T 2007.4   DZ/T 0276.18   DZ/T 0276.10   DZ/T 0276.17   

Basic data

Standard ID: DZ/T 0276.26-2015 (DZ/T0276.26-2015)
Description (Translated English): Regulation for testing the physical and mechanical properties of rock. Part 26: Test for determining the deformation of rock mass(Bearing plate method)
Sector / Industry: Geological Industry Standard (Recommended)
Classification of Chinese Standard: D00
Classification of International Standard: 19.02
Word Count Estimation: 12,132
Date of Issue: 2015-02-04
Date of Implementation: 2015-04-01
Regulation (derived from): Ministry of Land and Resources - Announcement 2015 No. 5
Issuing agency(ies): Ministry of Land and Resources
Summary: This Standard specifies the method for the determination of the bearing plate rock deformation. This Standard applies to test physical and mechanical properties of rock deformation test, rigid bearing plate method applicable to all types of rock, the flexible bearing plate method is suitable for the complete and more complete rock.

DZ/T 0276.26-2015: Regulation for testing the physical and mechanical properties of rock. Part 26: Test for determining the deformation of rock mass(Bearing plate method)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Regulation for testing the physical and mechanical properties of rock. Part 26. Test for determining the deformation of rock mass (Bearing plate method) ICS 19.020 D00 People's Republic of China geological mineral industry standard Rock physics and mechanics properties test procedures Part 26. Rock mass deformation test (bearing plate method) Part 26.Testfordeterminingthedeformationofrockmass Released on.2015-02-04 2015-04-01 implementation Ministry of Land and Resources of the People's Republic of China

Foreword

DZ/T 0276 "Testing Procedures for Physical and Mechanical Properties of Rocks" is divided into 31 parts. --- Part 1. General and general provisions; --- Part 2. Rock moisture test; --- Part 3. Rock particle density test; --- Part 4. Rock density test; ---Part 5. Rock water absorption test; ---Part 6. Rock hardness test; --- Part 7. Rock gloss test; --- Part 8. Rock antifreeze test; ---Part 9. Rock resistance to disintegration test; --- Part 10. Rock expansion test; --- Part 11. Rock erosion test; --- Part 12. Rock acid and alkali resistance test; --- Part 13. Rock specific heat test; --- Part 14. Rock thermal conductivity test; ---Part 15. Rock breakdown voltage and breakdown strength test; ---Part 16. Rock volume resistivity and surface resistivity test; --- Part 17. Rock radioactivity specific activity test; ---Part 18. Rock uniaxial compressive strength test; ---Part 19. Rock uniaxial compression deformation test; --- Part 20. Rock triaxial compression strength test; --- Part 21. Rock tensile strength test; --- Part 22. Rock flexural strength test; --- Part 23. Rock point load strength test; --- Part 24. Rock acoustic wave velocity test; ---Part 25. Rock shear strength test; --- Part 26. Rock mass deformation test (bearing plate method); --- Part 27. Rock mass deformation test (drilling deformation method); ---Part 28. Rock mass strength test (direct shear test); --- Part 29. Rock mass strength test (bearing plate method); --- Part 30. Rock bolt load test; --- Part 31. Rock sound wave velocity test. This part is part 26 of DZ/T 0276. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part is proposed by the Ministry of Land and Resources of the People's Republic of China. This part is under the jurisdiction of the National Land Resources Standardization Technical Committee Geological Experiment and Testing Technical Committee (SAC/TC93). This part was drafted by the Hubei Institute of Geological Experiments, and the Guangdong Geological Experimental Testing Center participated in the drafting. Drafters of this section. Tan Rui, Yuan Lizhi, Shi Bingfei. Rock physics and mechanics properties test procedures Part 26. Rock mass deformation test (bearing plate method)

1 Scope

This part of DZ/T 0276 specifies the deformation of rock mass by the bearing plate method. This part is applicable to rock deformation test in rock physical and mechanical properties test. The rigid bearing plate method is applicable to all kinds of rock masses and flexible pressure bearing. The plate method is suitable for complete and relatively complete rock masses.

2 Principle

By installing a bearing plate on the surface of the selected rock mass and applying vertical and horizontal stresses on it, according to the elastic theory, the rock mass is calculated. Deformation parameters under various levels of pressure. The method considers the rock mass to be a homogeneous, continuous, isotropic semi-infinite elastomer.

3 basic requirements

3.1 The direction of the force of the pilot should be consistent with the actual direction of the bedrock in the test section. 3.2 The test can be carried out under natural water conditions and under artificial water immersion conditions. 3.3 When excavation of the test section, anti-seismic measures shall be taken to reduce the disturbance and damage to the rock mass. 3.4 In the pilot part of the rock mass, the pilot area should be larger than the bearing plate, and the pressing area should be no less than 2500cm2; The volt difference is not more than 5 mm or not more than 1% of the diameter of the bearing plate. 3.5 Clean the surface of the pilot rock mass, lay a layer of cement slurry, put a rigid bearing plate, tap the bearing plate, and extrude excess cement slurry to make the bearing plate flat. Line pilot surface. The thickness of the cement slurry is not more than 1% of the diameter of the bearing plate, and the generation of bubbles in the cement slurry should be prevented. 3.6 Outside the bearing plate, the surface of the rock mass within the test affected area shall be flat, without loose rock blocks and stone shovel. 3.7 The pilot surface shall be perpendicular to the predetermined direction of force. 3.8 The distance from the edge of the bearing plate to the side wall or bottom plate of the test hole shall be greater than 1.5 times the diameter of the bearing plate; the edge of the bearing plate to the hole or palm The distance of the sub-surface should be greater than 2.0 times the diameter of the bearing plate; the distance from the edge of the bearing plate to the free surface should be greater than 6.0 times the diameter of the bearing plate. 3.9 The distance between the edges of the two pilot bearing plates shall be greater than 3.0 times the diameter of the bearing plate. 3.10 The lithology of the rock mass should be the same within the depth range of 3.0 times the pressure plate below the pilot surface. 3.11 The reaction force of the pilot should be able to withstand sufficient reaction. The range should generally be no less than (30 × 30) cm2, the surface of the rock should Chiseled. 3.12 The geological description shall include the following. a) Test section excavation and pilot preparation methods and occurrences. b) Pilot number, location, size; test segment number, location, elevation, bearing, depth. c) Rock name, color, structure and main mineral composition. d) The type, occurrence, width, extensibility, density, filling properties of the rock mass, and the relationship with the direction of the force. e) Weathering state and hydrogeological conditions of the rock mass in the test section. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of DZ/T 0276.26-2015_English be delivered?

Answer: Upon your order, we will start to translate DZ/T 0276.26-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of DZ/T 0276.26-2015_English with my colleagues?

Answer: Yes. The purchased PDF of DZ/T 0276.26-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.