Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

DZ/T 0275.3-2015 English PDF

Q: How long will the true-PDF of English version of DZ/T 0275.3-2015 be delivered?

Upon your order, we will start to translate DZ/T 0275.3-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of DZ/T 0275.3-2015_English with my colleagues?

Yes. The purchased PDF of DZ/T 0275.3-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
DZ/T 0275.3-2015: Specification identification of rock and mineral. Part 3: Ore polished section preparation
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
DZ/T 0275.3-2015	199	Add to Cart	3 days	Specification identification of rock and mineral. Part 3: Ore polished section preparation	Valid

Similar standards

YS/T 820.10 YS/T 820.16 YS/T 820.1 DZ/T 0275.2 DZ/T 0275.4 DZ/T 0275.1

Basic data

Standard ID: DZ/T 0275.3-2015 (DZ/T0275.3-2015)
Description (Translated English): Specification identification of rock and mineral. Part 3: Ore polished section preparation
Sector / Industry: Geological Industry Standard (Recommended)
Classification of Chinese Standard: D04
Classification of International Standard: 73.02
Word Count Estimation: 8,880
Date of Issue: 2015-02-04
Date of Implementation: 2015-04-01
Quoted Standard: DZ/T 0130.9-2006
Regulation (derived from): Ministry of Land and Resources - Announcement 2015 No. 5
Issuing agency(ies): Ministry of Land and Resources
Summary: This Standard specifies the ore-rays, step-like sand or fine ore production methods and quality requirements. This Standard applies to reflective polarizer significant ore-ray Microscope observations, sanding film production.

DZ/T 0275.3-2015: Specification identification of rock and mineral. Part 3: Ore polished section preparation

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification identification of rock and mineral.Part 3. Ore polished section preparation ICS 73.020 D04 People's Republic of China geological mineral industry standard Rock and Mineral Identification Technical Specification Part 3. Ore film preparation Part 3. Orepolished sectionpreparation Released on.2015-02-04 2015-04-01 implementation Ministry of Land and Resources of the People's Republic of China

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Equipment and equipment 1 4 Production Step 2 5 Quality Standard 3 6 Safety and environmental requirements 3 Reference 4

Foreword

DZ/T 0275 "Specifications for Rock Mine Identification" is divided into five parts. --- Part 1. General and general provisions; --- Part 2. Rock sheet preparation; --- Part 3. Ore film preparation; --- Part 4. Identification of rock flakes; --- Part 5. Ore light film identification. This part is the third part of DZ/T 0275. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part is proposed by the Ministry of Land and Resources of the People's Republic of China. This part is under the jurisdiction of the National Land Resources Standardization Technical Committee (SAC/TC93). This section drafted by. Zhejiang Institute of Geology and Mineral Resources. The main drafters of this section. Hu Yongping, Wu Guomou, Zheng Cunjiang, Bian Zhihong, Lu Dingrong. Rock and Mineral Identification Technical Specification Part 3. Ore film preparation Warning---The personnel using this section should have hands-on experience in formal laboratory work. This section does not point out all possible security questions. question. It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the conditions set by the relevant national regulations.

1 Scope

This part of DZ/T 0275 specifies the steps, methods and quality requirements for the production of ore light, sand or fines. This section applies to the production of ore light sheets and sanding sheets observed by a reflective polarizing microscope.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. DZ/T 0130.9-2006 Geological and mineral laboratory test quality management specification - Part 9. Identification of rock mineral samples

3 Equipment and equipment

3.1 Equipment 3.1.1 Slicer. Maximum speed 1300r/min. 3.1.2 Grinding machine. The grinding disc has a diameter of 400mm and a maximum speed of 1400r/min. 3.1.3 Polishing machine. The polishing disc has a diameter of 250mm and a maximum speed of 1000r/min. 3.1.4 Reflective microscope. 3.1.5 Electric blast drying oven. The temperature adjustment range is 50 °C ~ 300 °C. 3.1.6 Controllable temperature electric furnace. 1kW. 3.2 Tools 3.2.1 Marker pen. 3.2.2 Glass plate. 5mm thick. 3.2.3 calipers. 3.2.4 Stainless steel pot or aluminum pot. 3.2.5 Refractory board. 3.3 Materials 3.3.1 Diamond saw blade. 300mm in diameter. 3.3.2 Emery abrasives include. a) Emery 120; b) Emery 150; c) Emery 600; ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of DZ/T 0275.3-2015_English be delivered?

Answer: Upon your order, we will start to translate DZ/T 0275.3-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of DZ/T 0275.3-2015_English with my colleagues?

Answer: Yes. The purchased PDF of DZ/T 0275.3-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.