DZ/T 0223-2011 English PDFUS$849.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. DZ/T 0223-2011: Compiling code on the project of mining geo-environmental protection and integrated renovation Status: Valid DZ/T 0223: Historical versions
Basic dataStandard ID: DZ/T 0223-2011 (DZ/T0223-2011)Description (Translated English): Compiling code on the project of mining geo-environmental protection and integrated renovation Sector / Industry: Geological Industry Standard (Recommended) Classification of Chinese Standard: P13 Word Count Estimation: 34,322 Date of Issue: 2011-07-07 Date of Implementation: 2011-08-31 Older Standard (superseded by this standard): DZ/T 0223-2007 Regulation (derived from): MLR Notice No. 21 of 2011 Issuing agency(ies): Ministry of Land and Resources Summary: This standard specifies: mine geological environment protection and recovery management programming terminology and definitions, general rules, procedures and technical requirements. This standard applies to new construction, renovation (expanded) construction and production of mine mine geological environment protection and recovery management program preparation, closure mine mine geological environment protection and recovery management program 's preparation for implementation. DZ/T 0223-2011: Compiling code on the project of mining geo-environmental protection and integrated renovation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Compiling code on the project of mining geo-environmental protection and integrated renovation People's Republic of China geological mineral industry standard Replacing DZ/T 0223-2007 Mine geological environment protection and restoration Programming norm Published on.2011-07-07 2011-08-31 implementation Ministry of Land and Resources of the People's Republic of China ContentForeword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General 2 5 working procedures 2 6 Mine Geological Environment Survey 3 7 Mine geological environment impact assessment 3 8 Mine Geological Environment Protection and Restoration and Management Division 4 9 Mine geological environment protection and restoration measures 5 10 Mine geological environment protection and restoration management plan text compilation 6 Appendix A (Normative Appendix) Classification of Mine Geological Environmental Impact Assessment 8 Appendix B (Normative) Assessment of the importance of the assessment area 9 Appendix C (normative appendix) Classification of the geological environment conditions of the mine Appendix D (normative appendix) Mine production construction scale classification 12 Appendix E (normative appendix) Classification of mine geological environment impact degree 15 Appendix F (Normative Appendix) Mine Geology Environmental Protection and Restoration and Management Division 16 Appendix G (Normative Appendix) Compilation of the text report on mine geological environment protection and restoration and management plan Appendix H (Normative Appendix) Drawing Requirements 19 Appendix I (Normative Appendix) Report on Mine Geological Environmental Protection and Restoration Treatment Plan 21 Appendix J (informative appendix) Survey of current status of mine geological environment 23 Appendix K (informative appendix) Common examples of mapping of mine geological environment protection and restoration management plan 25ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces DZ/T 0223-2007 "Code for the preparation of mine environmental protection and comprehensive treatment plan". The main changes in this standard compared with DZ/T 0223-2007 are as follows. --- Modified the name of the standard. The standard name was changed to "Code for the preparation of mine geological environment protection and restoration management plan"; --- Adjusted the scope of application of the specification (see Chapter 1); --- Removed references that were unrelated to the revised specification and reordered them (see Chapter 2); --- Revised some terms and definitions and made corresponding changes to the relevant wording (see Chapter 3); --- Removed some of the general provisions, and added some new content (2007 version 4.4, 4.5, 4.6; this standard 4.1, 4.5, 4.6); --- Added "assessment scope", merged "assessment task" and "assessment content", deleted "assessment technical requirements" and comprehensive evaluation Relevant content (2007 version 7.1, 7.2, 7.6; this standard 7.1, 7.2); --- Added Chapter 8 "Mineral Environmental Protection and Restoration and Management Division" and Chapter 9 "Geological Environmental Protection and Restoration of Mines" Measure"; --- Modified Appendix B, Appendix E, Appendix F; --- Added Appendix I "Report Form for Mine Geological Environmental Protection and Restoration Treatment Program" (see Appendix I); --- Revised the "Investigation Table on the Status of Mine Geological Environment" (Appendix I of.2007; Appendix J of this standard); --- Revised the "Common Legends for Mine Geology Environmental Protection and Restoration Governance Program Mapping" (Appendix J of.2007; Appendix K of this standard). Appendix A to Appendix I of this standard are normative appendices, and Appendix J~Appendix K are informative appendices. This standard is proposed by the Department of Geology and Environment of the Ministry of Land and Resources, and the Technical Committee for Hydrogeological Engineering Geology and Environmental Geology is under the jurisdiction. This standard was drafted. Department of Geology and Environment of the Ministry of Land and Resources, China Geological Environment Monitoring Institute, Shanxi Provincial Department of Land and Resources, Hebei Province Yuan Hall, Hunan Provincial Department of Land and Resources, Anhui Provincial Department of Land and Resources, Jiangxi Provincial Department of Land and Resources, Xi'an Geological Survey Center, Chongqing Geological Environment Monitoring terminal. The main drafters of this standard. Tao Qingfa, Li Minglu, Li Jianzhong, Zhang Jinde, Zhang Deqiang, Bai Guangyu, Tian Lei, Zhang Hongbo, Zhang Yongbo, Xu Youning, Yang Yijun, Li Yixiang, Li Chengqiu, Cui Haiying, Chao Zhizhong, Ren Yourong, Zhuo Hongchun. This standard was first released on May 21,.2007. This is the first revision.IntroductionThe main basis for the preparation of this standard is the Law of the People's Republic of China on Mineral Resources, the Land Administration Law of the People's Republic of China and the Geological Disaster. Harm Prevention and Control Ordinance. According to the Regulations of the Ministry of Land and Resources of the People's Republic of China No. 44 on Mine Geology Environmental Protection Regulations (released in March.2009) The requirements for mine geological environment protection and restoration and treatment programs are revised, and the original standards are abolished at the same time. Mine geological environment protection and restoration Programming norm1 ScopeThis standard specifies the terms and definitions, general rules, working procedures and technical requirements for the preparation of mine geological environment protection and restoration management programs. This standard is applicable to the preparation of mine geological environment protection and restoration management plans for newly built, modified (expanded) construction and production mines. The preparation of the mine geological environment protection and restoration and management plan can be implemented by reference.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 958 regional geological map legend GB/T 12328-1990 Comprehensive engineering geological map legend and color code GB/T 12719-1991 Specification for hydrogeological engineering geological exploration in mining area GB/T 14538-1993 Comprehensive hydrogeological map legend and color code GB/T 21010-2007 Classification of land use status GB 50021-2001 Geotechnical Engineering Survey Specification GB 50330-2002 Technical Specifications for Building Slope Engineering DZ/T 0157-1995 1.50000 geological map geographic base map coding specification DZ/T 0179-1997 Color standard and color principle for geological maps (1.50000) DZ/T 0218-2006 landslide prevention engineering exploration specification DZ/T 0219-2006 Technical specification for design and construction of landslide prevention engineering DZ/T 0220-2006 Debris Flow Disaster Prevention Engineering Exploration Specification DZ/T 0221-2006 Specification for collapse, landslide and debris flow monitoring SL/T 183-2005 Groundwater Monitoring Code TD/T 1012-2000 Land Development and Consolidation Project Planning and Design Specification3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Mine geological environment mininggeo-environment The objective geological body of the interaction of lithosphere, hydrosphere and biosphere affected by mining activities. 3.2 Mine geological environment problem mininggeo-environmentalproblems The phenomenon of geological environment damage caused by mining activities. It mainly includes ground subsidence, ground fissure, collapse, landslide and mudstone in the mining area. Flow, aquifer damage, topographical landscape damage, etc. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of DZ/T 0223-2011_English be delivered?Answer: Upon your order, we will start to translate DZ/T 0223-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of DZ/T 0223-2011_English with my colleagues?Answer: Yes. The purchased PDF of DZ/T 0223-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version DZ/T 0223-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version DZ/T 0223-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
