DL/T 5022-2023 English PDFDL/T 5022: Historical versions
Basic dataStandard ID: DL/T 5022-2023 (DL/T5022-2023)Description (Translated English): (Design regulations for civil structures of power plants) Sector / Industry: Electricity & Power Industry Standard (Recommended) Classification of Chinese Standard: P60 Classification of International Standard: 27.100 Word Count Estimation: 362,373 Date of Issue: 2023-10-11 Date of Implementation: 2024-04-11 Older Standard (superseded by this standard): DL 5022-2012 Issuing agency(ies): National Energy Administration ICS 91.080
P 20
Record No.. J1355-2012
PROFESSIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
P DL 5022-2012
Replace DL 5022-1993
Technical Code for the Design of Civil
Structure of Fossil-fired Power Plant
ISSUED ON. JANUARY 4, 2012
IMPLEMENTED ON. MARCH 1, 2012
Issued by the National Energy Administration
ForewordAccording to the requirements of GUONENGKEJI [2009] No.163 - "Notice of the National Energy Administration on Issuing the Development and Revision Plan of the First Batch of Professional Energy Standards in 2009", the Northwest Electric Power Design Institute of China Power Engineering Consulting Group revised the former "Technical Stipulation for the Design of Civil Structure of Thermal Power Plant" (DL 5022-1993) jointly with organizations concerned. During revision, the standard drafting group carefully summarizes the practical design experience of fossil-fired power plant and the earthquake damage experience of Wenchuan Earthquake in 2008, absorbs the relevant research achievements and the practical construction experience of Chinese power engineering, solicits opinions from relevant design and design management organizations and invites experts for review before finalizing. Upon revision, this standard consists of 11 Chapters and 10 Appendixes, with the basic frame of Edition 1993. The main changes in this standard are as follows. 1. The capacity of applicable turbine-generator in this standard was changed into 125MW~1000MW from 12MW~300MW. 2. Chapter 2 (Terms) and Chapter 9 (Frame of Air-cooling Condensers) were added; the content related to reinforced concrete boiler cradle was cancelled; partial content related to the design of fabricated building was deleted; the values for units with 600MW and 1000MW live loads on roofs and floors of the main building were supplemented; the values for the combination value factor and frequency value factor of live loads on roofs and floors were added; the shape factor of wind load on dry-coal shed, circular closed coal-yard, closed overhead bridge for coal conveyer as well as wind-break wall for frame of air-cooling condensers. 3. The content related to fly ash silo, closed coal-yard, steel inner tube of chimney and spring-supported vibration insulating foundation was added; details for turbine-generator foundation and corrosion-protection design requirements for flue gas from desulfurizing chimney were revised and supplemented. 4. The content related to seismic design was comprehensively revised; the content related to steel-structure main building, chimney and frame of air-cooling condensers was added. 5. Appendixes A, C, D, E and K were added. In this standard, Articles 1.0.6, 3.1.6, 3.1.8, 5.2.1, 5.2.6, 5.4.1, 7.2.8, 11.1.2, 11.1.5, 11.1.6, 11.1.15, 11.2.1 and 11.3.5 printed in bold type are compulsory and must be enforced strictly. From the implementation date hereof, the former "Technical Stipulation for the Design of Civil Structure of Thermal Power Plant" (DL 5022-1993) shall be abolished simultaneously. This standard was proposed by the Electrical Planning and Design Institute. The National Energy Administration is in charge of the administration of this standard and the explanation of its compulsory provisions while the Technical Committee of Electric Power Design for Energy Industry and the Northwest Electric Power Design Institute of China Power Engineering Consulting Group is responsible for the routine management of this standard and the explanation of its specific technical contents respectively. During the process of Contents 1 General Provisions ... 1 2 Terms ... 2 3 Loads ... 4 3.1 Basic Requirements ... 4 3.2 Live Loads on Roofs and Floors ... 6 3.3 Crane Loads ... 21 3.4 Wind Loads and Snow Loads ... 21 4 Main Building ... 30 4.1 Basic Requirements ... 30 4.2 Reinforced Concrete Frame Structures ... 32 4.3 Steel Frame Structures ... 36 4.4 Roof Structures ... 37 4.5 Outside Wall Structures ... 40 4.6 Bunker and Crane Girder ... 41 4.7 Elevator Frame of the Boiler ... 45 5 Ground and Foundation ... 45 5.1 Basic Requirements ... 45 5.2 Calculation for Ground ... 47 5.3 Soft Soil Foundation ... 49 5.4 Foundation in Mountainous Regions ... 50 5.5 Collapsible Loess Foundation ... 52 5.6 Foundations ... 53 5.7 Trench ... 55 6 Dynamic Machine Foundation ... 56 6.1 Turbine-generator Pedestal ... 56 6.2 Auxiliary Machine Foundation ... 62 7 Building of Fuel Handling and Ash Handling ... 69 7.1 Coal Unloading Building ... 69 7.2 Coal Conveyor Gallery ... 71 7.3 Crusher Room ... 73 7.4 Coal Silo ... 74 7.5 Dry-coal Shed and Closed Coal-yard ... 77 7.6 Fly Ash Silo ... 78 7.7 Building of Fuel Oil Store ... 79 8 Chimney and Flue ... 81 8.1 Basic Requirements ... 81 8.2 Calculation for Chimney ... 81 8.3 Control Measures for Vertical Crack in Chimney of Reinforced Concrete Shell ... 85 8.4 Corrosion Protection for Chimney ... 87 8.5 Details for Chimney Structures ... 88 8.6 Flue ... 89 9 Frame of Air-cooling Condensers ... 91 9.1 Basic Requirements ... 91 9.2 Loads and Load Combinations ... 92 9.3 Details Requirements ... 93 10 Pipeline Rack ... 94 10.1 Basic Requirements ... 94 10.2 Loads and Load Combinations ... 96 10.3 Structural Calculation ... 97 11 Seismic Design ... 100 11.1 Basic Requirements... ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of DL/T 5022-2023_English be delivered?Answer: Upon your order, we will start to translate DL/T 5022-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of DL/T 5022-2023_English with my colleagues?Answer: Yes. The purchased PDF of DL/T 5022-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version DL/T 5022-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version DL/T 5022-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
