CNCA 13C-073-2010 English PDF
Basic dataStandard ID: CNCA 13C-073-2010 (CNCA-13C-073-2010)Description (Translated English): Toys Product Implementation Rules for Compulsory Certification - doll toy products Sector / Industry: China Compulsory Certification (CCC) Implementation Rules Classification of Chinese Standard: CNC Classification of International Standard: 97.200.50 Word Count Estimation: 18,137 Date of Issue: 12/1/2010 Date of Implementation: 12/1/2010 Older Standard (superseded by this standard): CNCA 13C-073-2006 Regulation (derived from): Notice of the State Commission of the People 's Republic of China No. 40 of 2010; Announcement No.23 of the State Certification and Accreditation Administration Issuing agency(ies): China National Accreditation Administration for Certification and Accreditation Summary: Applicable scope of implementation rules: non-electric figure doll toy products. CNCA 13C-073-2010: Toys Product Implementation Rules for Compulsory Certification - doll toy products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. CNCA -13C-073-2010 Number. CNCA -13C-073.2010 Toys Compulsory Product Certification Rules Doll toy products 2010-12-1 Post 2010-12-1 implementation China Certification and Accreditation Administration Commission issued table of ContentsApplicable range of products 1 1 2 authentication mode and certified Condition 1 2.1 Authentication Mode 1 Condition 1 2.2 certified 3 Certification basic link 1 Basic requirements for certification of 4 1 4.1 Application for certification .1 4.2 Type test 3 .4 4.3 Declaration of Conformity 4.4 Evaluation of certification results and approval ..4 Oversight 4.5 certified after ..5 5 Special provisions concerning certification ..8 ODM model 6 Certification ..8 .8 6.1 of validity of the certificate 6.2 Certification change 8 Expand the scope of certification 6.3 9 Pause 6.4 certificates (including restoration), cancellation and withdrawal of 9 7 certification marks of provisions .10 7.1 permit the use of the mark .10 7.2 Mark application and location ..10 8 charge ..10 9 Related Documents 10 Annex. toy products factories for compulsory certification of quality assurance capacity requirements 11 - 1 -1 Applicable product rangeThe rules applicable to the design or intended for children under 14 to play, at least the head and limbs of a non-woven fabric material Quality polymeric material, and with clothing or body is made of a soft material filled with non-electric figure doll toy products.2 authentication mode and certified conditions2.1 Authentication Mode Type tests (Statement of Compliance) Follow-up inspection NOTE. In the event of the certificate is revoked or certified product quality issues are the administrative punishment, the original holder to apply for certification again, When submitting information or client needs on-site verification, certification bodies may advance the implementation of the factory quality assurance ability assessment and the products consistency check Investigation, and may take a sample basis for product testing (see 4.5.4.2 conduct). 2.2 certified conditions 1) products comply with GB 6675 "National Safety Technical Code for Toys" standards. 2) factory quality assurance ability to meet "toy products factories for compulsory certification quality assurance capacity requirements" in Regulation set. 3) business (clients, manufacturers, production plants) submitted factory quality assurance ability and product support to the certification body Continued to meet the certification requirements of the Declaration of Conformity. Note. In the way of OEM (ODM) production of products obtained certificate holder shall not be certified as a result of other manufacturers Cooperation for certification basis.3 basic aspects of certification Application for certification type testing (Declaration of Conformity) Evaluation of certification results and approval certified after supervision4 Basic requirements for certification4.1 Application for certification 4.1.1 authentication unit Principal unit shall apply, according to the certification body unit approval certificate. - 2 - The same client, same manufacturer, same production plant, and in accordance with the principle of division of production units under a table Or family of products as same unit specific product unit division principle in the table below. Category Definition of application unit principle Dolls suitable for children under 14 years of age to play Playing at least a full head and limbs A polymeric material of non-woven fabric Into, and with clothing or body made of a soft Material or filled with baby doll Character dolls. Comprising. for a variety of hand-held or cuddled Character doll. 1, for the same age group (0 to 36 months; 37 months - 96 months; 97 months and above) 2, head, limbs, the same processing technology, similar material 3, similar to the play mode 4, lookalike. dress similar category (such as sports and leisure Type, dress type) or accessories and accessories category (eg furniture Categories, apparel, toiletries category) close 4.1.2 authentication information to be submitted when applying for certification Submit an application to the principal certification certification bodies designated by the application unit, and submit the following information. 1) applicant, manufacturer, manufacturer registration or supporting information legally registered. 2) production plant before a) production plant in general (applied scale of production, and production history of the product); List of the key production equipment b) production plant; The main testing equipment list c) production plant (including. name, type, size, quantity, accuracy, Test cycle); d) production plant to meet the "toy products factories for compulsory certification quality assurance capacity requirements," the quality management file (To be submitted when changing Edition/major changes usually occur in the initial application for certification and/or quality control documents) and member organizations FIG. 3) information related to the product Product information typically includes the following table and apply the certified products related content. Category Highlights Dolls 1. For the age group; 2. The head, limbs material; 3. Process; 4. doll structure, function and size; 5. Set Product accessories play mode. 4) sufficient to identify the main features of all certified products and the necessary photos or pictures of text. 5) key raw/auxiliary materials, parts list - 3 - The list shall indicate the name, type, size, production plant including. Head and limbs, the main material (A class), the coating material (applicable under six years of age, or for more than six years old and mouth Contact portion toys, toys toys and cosmetics, coating materials belong toys writing instrument control by Class A, others painted Layer material by Class B control), the filler (Class B), clothing materials (Class B). 6) for the principal vendor, the importer shall also submit to the designated certification bodies and producers or sales Importers related copy of the contract entered into with producers. 7) the principal entrust others certification shall be concluded by the client and the relevant certification, testing, inspection and monitoring Christ the power of attorney or contract matters such as when applying for certification, by the client shall also be submitted to the designated certification bodies signed Power of attorney or a copy of the contract. 8) other documents required by the certification body. 4.2 Type tests 4.2.1 Sample delivery for type testing After the certification agency to receive certification application, the client is responsible for providing sample products to be certified for the type test to detect bodies Products, and shall ensure that it provides a consistent product samples and actual production. Each unit shall be certified to send samples for type Test, when necessary, the need to send samples for testing on differences. 4.2.2 Number of samples The same certification unit main test sample to send samples/sample 3. If desired, the same unit covered by other models Differences should do the test, the test sample by detecting specific differences agency consultation with the client to determine the sample delivery/sampling quantity, Typically, each test sample differences need to do sampling up to more than two. 4.2.3 testing standards GB 6675 "National Safety Technical Code for Toys" 4.2.4 Test items The test items include GB 6675 "National Safety Technical Code for Toys" standard applicable to all items. 4.2.5 Sample of rectification Type testing event of failure, should be within the rectification, the rectification longest time not more than three months. Schedule After completion of the rectification, the principal samples should be sent to the original seizure detection means re-examination. Late unable to complete the rectification, rectification or knot --4-- If failed, terminate this certification, testing organizations test report issued unqualified products, along with product rectification process For information about the certification body a termination certified disposal. 4.2.6 Disposal of test samples and related information After the completion of type testing, testing sample sealed by the detection means at least one year, according to the principal to the disposal of the other samples. Data, sample pictures and other information stored in test records, should ensure traceability of the test sample. Testing organization responsible for the test report promptly send the certification body. 4.3 Declaration of Conformity Type test, companies (clients, manufacturers, production plants) should be submitted to the certification body for certification capacity Products continue to meet certification standards, factory quality assurance ability to continue to meet the "toy products factories for compulsory certification quality Assurance capability requirements "and declaration of compliance-related certification requirements. Note. For the convenience of clients, product quality assurance certified declaration of conformity with the application can be submitted at the same data. 4.4 Evaluation of certification results and approval 4.4.1 Evaluation of certification results and approval The certification body type test results, declaration of conformity and the factory site inspection results (where applicable) integrated Evaluations, should be qualified by the principal to the authentication unit issued Certification. 4.4.2 Time frame for certification Under normal circumstances accepting applications for accreditation from the certificate issued to the client 90 days do not meet certification requirements It shall notify the principal in writing and explain the reasons. Note. Time frame for certification means the time of the date of certification of the actual date of acceptance of the certification application till the issuance, including sample Detection time, duration of factory inspection, evaluation of certification results and approval of certificates, etc. Product testing time from the date of service of the sample test institution from the calculation, the detection period of 15 working days, excluding Samples rectification time. Inspection reports should be submitted no more than 5 working days, inspectors complete the inspection and receive compliant Date of nonconformity corrective action reports. Evaluating certification results and approving the certificates shall normally be no more than five working days. - 5 - 4.5 certified after supervision Continuous supervision and inspection activities up inspection by the certification body responsible for the organization to supervise certified organization authentication result effective. 4.5.1 The scope of supervision and inspection Follow-up inspection, including all certified products and processing establishments certified product sampling, inspection factory quality assurance ability Investigation, product consistency check and market follow-up inspection, if necessary. If necessary, the certification body can ODM manufacturers inspect on the spot. 4.5.2 supervision and inspection frequency 4.5.2.1 In general, from the date of issue within the six-month certificate debut for the first time plant supervision and inspection, after Every six months should be a supervision and inspection. 4.5.2.2 The certification body will be based on a proven track record certified product quality and stability of production companies and poor record And other factors of the case record, the certified products and their manufacturers classified management oversight to develop category management evaluator Law, according to the ratings appropriate to increase/decrease the frequency of inspection. 1) if they meet the following conditions may be appropriate to reduce the frequency of inspection After obtaining the certificate if the production plant certified product safety and quality problem does not occur within 12 months of the previous supervision For consistency does not appear nonconformity and other serious nonconformity, supervision and sampling failure does not occur, It can reduce the frequency of inspection, but at least every 12 months should be a supervision and inspection. 2) In the event of one of the following situations increase of the frequency. a) certified product has serious quality problem, or is complained, and verified when the responsibility of the holder; b) The certification body has sufficient reasons to the conformity of the certified products and certified product standard requirements doubts; c) there is sufficient information that the plant due to changes in organization structure, production condition and quality assurance system to the factory When the product can affect the compliance and consistency. 4.5.3 Time of inspection Factory inspection time to perform the "factory quality assurance ability to check the number of man-days calculation table." Total Factor factory inspection, covered by this rule. Usually each site inspection of 1-4 man-days; Some elements of examination for 1-3 man-day. - 6 - As the quality of corporate management file occurs for version/important changes may be appropriate to increase the man-days to review documents, document review Additional time is generally not more than 0.5 man-day. Of ODM manufacturers, ODM manufacturer for inspection, certification bodies designated person-days may be increased, in particular the implementation of the "strong Compulsory product certification and implementation rules involving supplementary regulations ODM mode. " In the case of person-days at the need to increase total factor inspection, supervision and inspection of the total man-days time it is usually up to 5 personal days; Some elements of checks, it is usually up to 3.5 person-days. 4.5.4 Content of the supervision and inspection Factory quality assurance ability examination (including product consistency check) product sampling. The results can be used as product sampling plant to confirm the test results with the product unit. 4.5.4.1 Factory site supervision and inspection 1) Check the factory quality assurance ability Factory quality assurance ability assessment according to Annex "Compulsory Product Certification Toys Factory Quality Assurance Ability" real CONSTRUCTION. The first 4, 5, 8 provision of supervision and inspection will check each item, the contents of the remaining terms and conditions can be selected according to the investigation. Supervision and inspection may also include a certification body designated inspection items, including the last closed factory inspection unqualified items, Unqualified product rectification and the government ordered the recall, companies take the initiative to recall defective products implementation. Check for ODM production plant, the implementation of "the compulsory product certification and implementation rules involved ODM mode Supplementary Regulations" The relevant provisions. Initial factory inspection and factory inspection undertaken in every four, respond plant quality assurance ability TFP an examination. 2) product consistency check Of certified products, the manufacturer shall ensure that certified products in the following aspects and product certification testing message Eligible products covered by the results reported are consistent. label certified products, the specification and indicated on the packaging the product name, specifications and models, warning statements; certification structure of the product; certified products key raw/auxiliary materials, parts and components. Disposal 3) failed item - 7 - Nonconformity factory inspection occurs, the factory should be completed within the deadline for rectification, the rectification longest time not more than three months. Certification bodies to take appropriate way to confirm the results. Overdue not be completed rectification, rectification or unsatisfactory results, This certification does not pass the factory inspection. Inspection Unit issued unqualified report submitted by the certification body to make decisions related to disposal. 4.5.4.2 Product sampling test Sampling activities generally and on-site supervision and inspection simultaneously, or by certification body personnel assigned to special feed production plant Line sampling. NOTE. Within the supervision period, the country designated testing agency issued pumping and pumping provincial inspection reports, and can replace the need of supervision and inspection sampling samples The company submit the test report to the certification body portion of the unit product sampling or all of the results, the certification body should be made, where appropriate, Reducing or reducing sample arrangement of test items. 1) the principle of product sampling Certified product in each category after the implementation of follow-up inspection should be subject to random testing. Certification and each category is below 7, supervision and inspection of each extract a certificate covering the products seized Measurement. Each category and certificates of eight or more, each draw at least two products covered by the certificate were detected, No more than 25% of the total number of similar products certification certificate. Each certificate is usually drawn in one type of product to be tested. 2) sampling method In the end of the line by the manufacturer, certificated products or finished products random sampling. Sampling at the Storehouse When sampling base should not be less than 20 times the number of samples of each. After the samples taken by the sampling should be sealed, the principal responsible for send/send samples to detect specific embodiment detection mechanism. 4.2.2 with provisions 3) the number of samples, testing standards, test items 4.2.3, 4.2.4. 4) disposal of test results After completion of the supervision sampling, testing organizations responsible for the inspection report promptly send the certification body for audit sampling Detected substandard products, substandard test report should be issued immediately send timely certification body. Disposal 5) test samples and related information Disposal of supervision and inspection samples and relevant information to implement the provisions of 4.2.6. - 8 - 4.5.5 Evaluation and approval of the results of the monitoring Supervision and inspection results of the evaluation by the certification body qualified to maintain the validity of the certificate, continue to use the certification mark Blog. Supervision and inspection by the certification body evaluate the results of unqualified (including product sampling test failed, supervision and inspection of the factory Failure, etc.), the certification body in accordance with the press, "Compulsory Certification cancellation, suspension, revocation and implementation rules" to Demand for disposal. 4.5.6 Special supervision and management of certified companies 4.5.6.1 for national or provincial supervision and inspection results to prove the existence of substandard products, AQSIQ issued ordered the church Back to the certified product, the certification body should be disposed of by certified companies re......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CNCA 13C-073-2010_English be delivered?Answer: Upon your order, we will start to translate CNCA 13C-073-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of CNCA 13C-073-2010_English with my colleagues?Answer: Yes. The purchased PDF of CNCA 13C-073-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |