CJ/T 519-2018 English PDFUS$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. CJ/T 519-2018: Equipment for municipal pipeline closed circuit television inspection Status: Valid
Basic dataStandard ID: CJ/T 519-2018 (CJ/T519-2018)Description (Translated English): Equipment for municipal pipeline closed circuit television inspection Sector / Industry: Urban Construction Industry Standard (Recommended) Classification of Chinese Standard: Q81 Classification of International Standard: 25.04.30 Word Count Estimation: 13,193 Date of Issue: 2018-11-07 Date of Implementation: 2019-04-01 Quoted Standard: GB/T 191; GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.3; GB/T 2423.6; GB/T 2423.10; GB/T 2423.17-2008; GB 3836.1; GB/T 4208; GB 4793.1; GB/T 6093-2001; GB/T 6388; GB/T 6461-2002; GB/T 7401-1987; GB/T 13306; GB/T 16697-2017; GB/T 18268.1 Regulation (derived from): Ministry of Housing and Urban-Rural Development Announcement No. 2018 No. 278 Issuing agency(ies): Ministry of Housing and Urban-Rural Development of the People's Republic of China Summary: This standard specifies the terms and definitions, composition and basic functions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of municipal pipeline television detectors. This standard applies to the manufacture and inspection of municipal pipeline television detectors. CJ/T 519-2018: Equipment for municipal pipeline closed circuit television inspection---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Equipment for municipal pipeline closed circuit ICS 25.04.30 Q81 People's Republic of China urban construction industry standards Municipal pipeline television detector Published on.2018-11-07 Implementation of.2019-04-01 Ministry of Housing and Urban-Rural Development ContentForeword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Composition and basic functions 2 5 Requirements 3 6 Test method 5 7 Inspection rules 8 8 Marking, packaging, transportation and storage 9ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development. This standard is under the jurisdiction of the Municipal Water Supply and Drainage Standardization Technical Committee of the Ministry of Housing and Urban-Rural Development. This standard was drafted. Baoding Jindi Scientific Instrument Co., Ltd., Guangzhou Municipal Group Co., Ltd., China University of Geosciences (Wuhan), Wuhan Zhongyi IOT Technology Co., Ltd., Beijing Beipai Equipment Industry Co., Ltd., China Urban Planning Association Underground Pipeline Professional Committee Hui, Baoding Jindi Underground Pipeline Exploration Engineering Co., Ltd., Beijing Longkexing Non-excavation Engineering Co., Ltd., Shanghai Yufan Environmental Technology Co., Ltd. Limited company, Beijing New Technology Application Research Institute, Nanjing Urban Drainage Management Co., Ltd. The main drafters of this standard. Qi Junfeng, Wang Xuejing, An Guanfeng, Ma Baosong, Zheng Hongbiao, Liu Wei, Liu Baosheng, Wu Huizhong, Wang Xuejun, Li Lianhe, Liu Kehui, Wang Xingmei. Municipal pipeline television detector1 ScopeThis standard specifies the terms and definitions, composition and basic functions, requirements, test methods, inspection rules and standards of municipal pipeline television detectors. Awareness, packaging, transportation and storage. This standard applies to the manufacture and inspection of municipal pipeline television detectors.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 2423.1-2008 Environmental testing of electric and electronic products - Part 2. Test methods Test A. Low temperature GB/T 2423.2-2008 Environmental testing of electrical and electronic products - Part 2. Test methods Test B. High temperature GB/T 2423.3 Environmental testing - Part 2. Test method test Cab. constant damp heat test GB/T 2423.6 Environmental testing for electric and electronic products - Part 2. Test methods Test Eb and guide. Collision GB/T 2423.10 Environmental testing of electric and electronic products - Part 2. Test method test Fc. Vibration (sinusoidal) GB/T 2423.17-2008 Environmental testing of electric and electronic products - Part 2. Test method test Ka. salt spray GB 3836.1 Explosive atmosphere - Part 1. General requirements for equipment GB/T 4208 enclosure protection grade (IP code) Safety of electrical equipment for measurement, control and laboratory use - Part 1. General requirements GB/T 6093-2001 Geometric quantity specification (GPS) length standard gauge block GB/T 6388 transport packaging receipt and delivery mark GB/T 6461-2002 Rating of specimens and test pieces of metals and other inorganic coatings on metal substrates after corrosion test GB/T 7401-1987 Subjective evaluation method for color TV image quality GB/T 13306 signage GB/T 16697-2017 Single sensor application TV camera general technical requirements and measurement methods GB/T 18268.1 Electromagnetic compatibility requirements for electrical equipment - Part 1 . General requirements3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Pipeline inspection of the internal state image of the pipeline by real-time collecting, displaying and recording the internal state of the pipeline by carrying the camera part through the carrying device Measuring equipment. The test object is mainly for visual defects in the municipal pipeline. 3.2 Carrier transporter A device that can actively or passively travel within a pipeline and can be loaded with cameras, sensors, and the like. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CJ/T 519-2018_English be delivered?Answer: Upon your order, we will start to translate CJ/T 519-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of CJ/T 519-2018_English with my colleagues?Answer: Yes. The purchased PDF of CJ/T 519-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |