CJ/T 321-2010 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
CJ/T 321-2010: Aluminum-plastic laminated pipe and fitting
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
CJ/T 321-2010	419	Add to Cart	3 days	Aluminum-plastic laminated pipe and fitting	Valid

Similar standards

YS/T 492   YS/T 95.2   YS/T 273.15   

Basic data

Standard ID: CJ/T 321-2010 (CJ/T321-2010)
Description (Translated English): Aluminum-plastic laminated pipe and fitting
Sector / Industry: Urban Construction Industry Standard (Recommended)
Classification of Chinese Standard: H61
Classification of International Standard: 77.150.10
Word Count Estimation: 16,111
Date of Issue: 2010-01-14
Date of Implementation: 2010-06-01
Quoted Standard: GB/T 2828.1-2003; GB/T 2918; GB/T 3190; GB/T 3682; GB/T 4436; GB/T 4437.1; GB 5237.2-2008; GB/T 6111; GB/T 7307; GB/T 8806; GB/T 10798; GB/T 17219; GB/T 18742.2-2002; GB/T 18991; GB/T 19473.2; CJ/T 175
Regulation (derived from): Bulletin of the Ministry of Housing and Urban No. 483; industry standard filing Notice 2010 No. 3 (total 123)
Issuing agency(ies): Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary: This standard specifies the aluminum lined composite pipes and fittings of terms, definitions, symbols, abbreviations, conditions, materials, product classification, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to hot and cold water piping systems, including industrial and civilian hot and cold water, hot water heating, central air conditioning and drinking water, aluminum lined composite pipe systems, taking into account the material chemical resistance and heat resistance under conditions can be used for a variety of chemical fluid and gas delivery aluminum lined composite pipe systems.

CJ/T 321-2010: Aluminum-plastic laminated pipe and fitting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Aluminum-plastic laminated pipe and fitting Book People's Republic of China urban construction industry standards Aluminum alloy plastic composite pipe and pipe fittings 2010-01-14 released 2010-06-01 implementation Ministry of Housing and Urban-Rural Development, People's Republic of China released

Foreword

Appendix A of this standard is an informative annex. This standard proposed by the Ministry of Housing and Urban Standard and Design Institute. This standard by the Ministry of Housing and Urban Water Supply and Drainage Products Standardization Technical Committee. This standard was drafted. Beijing Aerospace Caesar International Investment Management Co., Ltd., Taiyuan BASF Caesar Pipe Co., Ltd., Shaanxi Aerospace Caesar Engineering Equipment Co., Ltd. The main drafters of this standard. Wang Xingzhou, Jia Zhihua, Zhao Wenli, Liu Xudong, in Asia, Zhang Nan, Wang Tingting. This standard is released for the first time. Aluminum alloy plastic composite pipe and pipe fittings

1 Scope

This standard specifies the terms, definitions, symbols, abbreviations, conditions of use, materials, product classification, Requirements, test methods, inspection rules and marking, packaging, transport and storage. This standard applies to hot and cold water piping systems, including industrial and civil hot and cold water, hot water heating, central air conditioning and drinking water and other aluminum alloy lining Plastic composite pipe system; taking into account the material's chemical resistance and heat resistance conditions, can be used for a variety of chemical fluids and gas transport aluminum alloy lining Plastic composite pipe system.

2 Normative references

The following documents contain provisions which, through reference in this standard and constitute provisions of this standard. For dated references, it is followed All amendments (not including errata content) or revisions do not apply to this standard, however, to encourage the parties to the agreement according to this standard Study whether the latest versions of these files are available. For undated references, the latest version applies to this standard. GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. batch acceptance inspection by acceptance quality limit (AQL) sampling plan GB/T 2918 plastic sample conditioning and testing of the standard environment GB/T 3190 Deformed aluminum and aluminum alloy chemical composition GB/T 3682 Thermoplastics melt mass flow rate and melt volume flow rate determination GB/T 4436 aluminum and aluminum alloy pipe dimensions and tolerances GB/T 4437.1 aluminum and aluminum alloy extruded tubes first part. seamless pipe Aluminum alloy building profiles - Part 2. Anodized profiles Thermoplastics pipes for the conveyance of fluids - Pressure resistance test methods GB/T 7307 55 ° non-sealed pipe thread Plastics piping systems - Part size measurement of plastic parts GB/T 8806 GB/T 10798 thermoplastic pipe universal wall thickness table GB/T 17219 drinking water distribution equipment and protective materials safety evaluation criteria Polypropylene piping systems for hot and cold water GB/T 18742.2-2002 GB/T 18991 hot and cold water systems with thermoplastic pipes and fittings GB/T 19473.2 Polybutylene (PB) piping systems for hot and cold water use - Part 2. Tubing CJ/T 175 Heat-Resistant Polyethylene (PE-RT) Piping System for Hot and Cold Water 3 Terms and definitions, symbols and abbreviations This standard uses the following terms and definitions, symbols and abbreviations. 3.1 Terms and definitions The following terms and definitions apply to this standard. 3.1.1 One kind of outer tube is the aluminum alloy tube, the inner tube is a thermoplastic (PP-R, PB, PE-RT) tube, which is prestressed into a two-layer structure Pipe. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of CJ/T 321-2010_English be delivered?

Answer: Upon your order, we will start to translate CJ/T 321-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of CJ/T 321-2010_English with my colleagues?

Answer: Yes. The purchased PDF of CJ/T 321-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.