CJ/T 159-2015 English PDF

US$629.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
CJ/T 159-2015: Polyolefin/aluminum/polyolefin composite pressure pipe (butt-welded by aluminum pipe)
Status: Valid

CJ/T 159: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
CJ/T 159-2015	629	Add to Cart	5 days	Polyolefin/aluminum/polyolefin composite pressure pipe (butt-welded by aluminum pipe)	Valid
CJ/T 159-2006	RFQ	ASK	9 days	Polyethylene/aluminum/polyethlene/composite pressure pipe	Obsolete
CJ/T 159-2002	759	Add to Cart	5 days	Polyethylene/Aluminum/Polyethylene/composite pressure pipe	Obsolete

Similar standards

MT 141   QB/T 2472   JC/T 858   CJ/T 358   CJ/T 493   CJJ 159   

Basic data

Standard ID: CJ/T 159-2015 (CJ/T159-2015)
Description (Translated English): Polyolefin/aluminum/polyolefin composite pressure pipe (butt-welded by aluminum pipe)
Sector / Industry: Urban Construction Industry Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 23.040.20
Word Count Estimation: 27,224
Date of Issue: 2015-11-23
Date of Implementation: 2016-04-01
Older Standard (superseded by this standard): CJ/T 159-2006
Quoted Standard: GB/T 228; GB/T 1033.1-2008; GB/T 2828.1; GB/T 2918; GB/T 6111; GB/T 8806; GB/T 13021; GB 15558.1; GB/T 15560; GB/T 17219; GB/T 18474; GB/T 18742.1; GB/T 18997.1-2003; GB/T 18997.2-2003; GB/T 19466.3; GB/T 28799.1; ISO 15874-1
Regulation (derived from): Ministry of Housing and Urban?Rural Development Announcement No.964
Issuing agency(ies): Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary: This standard specifies the terms and definitions, symbols and acronyms, classification and marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of aluminum-plastic composite pressure pipes (butt welding). This standard applies to the transmission of fluid (cold water, hot water, drinking water transmission and distribution systems and water supply and distribution systems, heating systems, gas, etc.) of the aluminum-plastic composite pressure pipe.

CJ/T 159-2015: Polyolefin/aluminum/polyolefin composite pressure pipe (butt-welded by aluminum pipe)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyolefin/aluminum/polyolefin composite pressure pipe (butt-welded by aluminum pipe) ICS 23.040.20 G33 People's Republic of China urban construction industry standards Replacing CJ/T 159-2006 Plastic composite pressure pipe (butt welding) butt-welded byaluminumpipe Posted on.2015-11-23 2016-04-01 implementation Ministry of Housing and Urban-Rural Development, People's Republic of China released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and Definitions, Symbols and Abbreviations 1 4 classification and marking 3 5 material 4 6 Requirements 5 7 Test Methods 9 Inspection rules 11 9 logo, packaging, transportation and storage 13 Appendix A (Normative) Pipe ring minimum average peel force test method 15 Appendix B (Normative) Pipeline system of pipe fittings additional requirements 18

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard applies to the modification of PP-RCT material requirements using ISO 15874-1 "plumbing and plumbing systems - polypropylene - Part 1. General" In the PP-RCT material requirements. This standard replaces CJ/T 159-2006 "aluminum-plastic composite pressure pipe (butt welding)." This standard compared with CJ/T 159-2006 main technology The changes are as follows. --- Revised the production of pipe, pipe fittings used in the requirements of heat-resistant polyethylene material; --- Increased inner and outer plastic random copolymer of polypropylene six-type aluminum-plastic composite pipe; --- Increasing the production of pipe, pipe fittings used random copolymerization polypropylene material requirements; --- Increasing the minimum average tube ring high temperature peel strength requirements and test methods; --- Remove the original standard Appendix A, Appendix B, Appendix C, Appendix D, Appendix F. This standard proposed by the Ministry of Housing and Urban Standard and Design Institute. This standard by the Ministry of Housing and Urban Water Supply and Drainage Standardization Technical Committee building centralized. This standard was drafted. Wuhan Jinniu Economic Development Co., Ltd., the State Chemical Building Materials Testing Center, China Academy of Architectural Design Limited the company. The main drafters of this standard. Zhang Ke more, Sun Jiawen, Xu Wen Long, Guo Bing Tu Xiangqun, Liu Feng, Wen Shengzhang, Dong Bobo, Chen Wei, Wang Chao. This standard replaces the standards previously issued as follows. --- CJ/T 159-2006. Plastic composite pressure pipe (butt welding)

1 Scope

This standard specifies the terms and definitions, symbols and abbreviations, classification and marking, materials, requirements, test Inspection methods, inspection rules, marking, packaging, transportation and storage. This standard applies to the transport of fluids (cold water, hot water drinking water distribution system and water supply and distribution systems; heating systems, gas, etc.) of aluminum Composite pressure pipe.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 228 metallic materials at room temperature tensile test method GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method (idtISO 1183-1..2004) GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch inspection sampling plan by acceptance quality limit (AQL) (idtISO 2859-1) GB/T 2918 plastic sample conditioning and testing of the standard environment (idtISO 291) GB/T 6111 fluid-filled thermoplastic tubing withstanding pressure test method (idtISO 1167) GB/T 8806 Plastics piping systems - Determination of dimensions of plastic parts (idtISO 3126) GB/T 13021 Polyethylene pipes and fittings - Determination of carbon black content - Thermal weight loss method (neqISO 6964) GB 15558.1 Buried polyethylene (PE) piping systems for gas - Part 1. Tubing Fluidized plastic pipes - Hydraulic instantaneous burst and pressure test methods GB/T 17219 drinking water distribution equipment and protective materials safety evaluation criteria GB/T 18474 Crosslinked polyethylene (PE-X) pipe and tube cross-linked degree of test method (eqvISO 10147) Polypropylene piping systems for hot and cold water GB/T 18742.1 Part 1. General GB/T 18997.1-2003 Aluminum-plastic composite pressure pipe - Part 1. Aluminum pipe lap welded aluminum-plastic composite pipe GB/T 18997.2-2003 Aluminum-plastic composite pressure pipe - Part 2. Butt-welded aluminum-plastic composite pipe GB/T 19466.3 Plastics - Differential scanning calorimetry (DSC) - Part 3. Determination of melting and crystallization temperature and enthalpy (idt ISO 11357-3) GB/T 28799.1 hot and cold water with heat-resistant polyethylene (PE-RT) piping systems - Part 1. General ISO 15874-1 Piping systems for hot and cold water - Polypropylene - Part 1. General 3 Terms and definitions, symbols and abbreviations 3.1 Terms and definitions The following terms and definitions apply to this document. 3.1.1 Plastic composite pressure pipe (butt welding) polyolefin/aluminum/polyolefincompositepressurepipe (butt-welded ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of CJ/T 159-2015_English be delivered?

Answer: Upon your order, we will start to translate CJ/T 159-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of CJ/T 159-2015_English with my colleagues?

Answer: Yes. The purchased PDF of CJ/T 159-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version CJ/T 159-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version CJ/T 159-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.