GB/T 7713.2-2022 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7713.2-2022: Presentation of academic papers
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7713.2-2022	359	Add to Cart	4 days	Presentation of academic papers	Valid

Similar standards

WB/T 1120   GB/T 40952   GB 5296.4   GB/T 6447   GB/T 7713.1   GB/T 7714   

Basic data

Standard ID: GB/T 7713.2-2022 (GB/T7713.2-2022)
Description (Translated English): Presentation of academic papers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A14
Classification of International Standard: 01.140.20
Word Count Estimation: 18,162
Date of Issue: 2022-12-30
Date of Implementation: 2023-07-01
Older Standard (superseded by this standard): GB/T 7713-1987, GB/T 7713-1987
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 7713.2-2022: Presentation of academic papers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 01.140.20 CCSA14 National Standards of People's Republic of China Partially replace GB/T 7713-1987 Rules for Writing Academic Papers Posted on 2022-12-30 2023-07-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 components 2 4.1 General requirements 2 4.2 Front part 2 4.3 Text part 3 4.4 Appendix Part 4 5 Format 4 5.1 General requirements 4 5.2 Number 5 5.3 Quantities and units 5 5.4 Figure 6 5.5 Form 7 5.6 Number 7 5.7 Mathematical formula 8 5.8 Note 9 5.9 Scientific and technical terms 9 Appendix A (Normative) Constituent Elements of Academic Papers 10 Appendix B (Informative) Font Sizes and Typefaces Used in Academic Papers 11 Reference 12

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is part 2 of GB/T 7713.GB/T 7713 has issued the following parts. --- Part 1.Dissertation writing rules; --- Part 2.Rules for writing academic papers; --- Part 3.Rules for writing technical reports. This document partially replaces GB/T 7713-1987 "Formats for Writing Scientific and Technical Reports, Dissertations and Academic Papers", and is consistent with Compared with GB/T 7713-1987, except for structural adjustment and editorial changes, the main technical changes are as follows. a) Extend its scope of application to academic papers in all forms of communication, including print, microform, and electronic (see Chapter 1); b) Changed "Introduction" to "Scope" and changed relevant expressions (see Chapter 1, Chapter 1 of the 1987 edition); c) Changed "Definitions" to "Terms and Definitions", deleted terms and definitions not related to the rules for writing academic papers, and changed "Academic The definition of "thesis", adding the definition of "text part" and "references" (see Chapter 3, Chapter 2 of the 1987 edition); d) Change "writing requirements" and "writing format" to "arranging format" (see Chapter 5, Chapter 3 and Chapter 4 of the 1987 edition); e) Change "preamble part", "main part", "appendix" and "end part" to "component" and "formatting" (see Chapter 4, Chapter 5 Chapter 5, Chapter 6, Chapter 7, Chapter 8 of the 1987 edition); f) Changes to "components". Regarding the number of titles, change "titles should generally not exceed 20 characters" to "in order to facilitate communication and use, The title should be concise, and generally should not exceed 25 characters”; as for the abstract, “Chinese abstracts should generally not exceed.200-300 characters; foreign abstracts If it is not suitable to exceed 250 content words" to "the number of words in the Chinese abstract, in principle, it should be compatible with the results in the paper. Under normal circumstances, the report abstract should be about 400 words, the report/indicative abstract should be about 300 words, and the indicative abstract should be about 150 words The right is appropriate. The content of the Chinese abstract and the foreign language abstract should correspond. In order to facilitate international exchanges, the foreign language abstract can contain more content than the Chinese abstract. More information", deleted "unless there is no workaround available, do not use figures, tables, chemical structures in the abstract"; in "Other items In "Projects", the items that are required, suggested or allowed to be marked in the pre-part of academic papers are added, such as fund name and project number, accepted manuscript Date, format of references citing this paper, elements of enhanced publication of the paper, and related statements (see 4.2.1, 4.2.3, 4.2.5, 5.5.1, 5.7.4, 5.7.5 of the 1987 edition); g) In the "Format", the numbers, quantities and units, illustrations, tables, numbers, mathematical formulas, notes, science and technology of academic papers are selected. The main points and examples of the normalization of nouns (see 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, 5.9); h) Deleted Appendix A "Cover Example" and Appendix B "Related Standards", and added normative Appendix A "Constituent Elements of Academic Papers" (See Appendix A, Appendix A and Appendix B of the 1987 edition). Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Information and Documentation Standardization Technical Committee (SAC/TC4). This document was drafted by. Beijing Zhuozhong Publishing Co., Ltd., Beijing Normal University Press (Group) Co., Ltd., "Science China" magazine Co., Ltd., Institute of Software, Chinese Academy of Sciences, Beijing Forestry University, Shanghai University, "Chinese Medical Journal" Co., Ltd., Institute of Machinery Industry Information, China Institute of Science and Technology Information. The main drafters of this document. Zhang Pinchun, Chen Haoyuan, Ren Shengli, Fang Mei, Zhang Tieming, Liu Zhiqiang, Liu Bing, Liang Fujun, Liu Chunyan. The release status of previous versions of this document and the documents it replaces are as follows. ---It was first published as GB/T 7713-1987 in 1987; --- This is the first revision.

Introduction

Whether it is an academic paper, a dissertation or a scientific report, its writing and layout need to follow certain norms, so as to facilitate the development of information systems. collection, storage, processing, processing, retrieval, utilization, communication, dissemination. GB/T 7713-1987 "Scientific and technical reports, dissertations and academic Writing Format of Papers", which stipulates the unified requirements and layout format for academic papers, dissertations and scientific and technological reports. Given the three The objects of use and purposes of use are not the same, and the writing requirements and layout formats are quite different. Later, when GB/T 7713 was revised, it was divided into three Sections are revised separately. --- Part 1.Dissertation writing rules. The purpose is to stipulate the writing format and requirements of the dissertation. --- Part 2.Rules for writing academic papers. The purpose is to specify the writing requirements and layout format of academic papers. --- Part 3.Rules for writing technical reports. The purpose is to specify the requirements for the preparation, organization and layout of scientific and technological reports. This document describes the basic requirements and format specifications for writing and editing academic papers. The standardization and standardization of academic paper writing is Standardize its format and style, standardize language, characters and symbols, standardize technology and measurement units, so as to facilitate the retrieval and transmission of academic papers To promote the exchange and use of academic achievements. The scope of application of this document includes all academic papers reflecting the scientific systems of nature, society and humanities. However, due to the discipline Due to differences in categories, selected topics, research work methods, work progress stages, observations and investigations, etc., this document is used for academic paper compilation Writing should adopt the principle of combining seriousness and flexibility. At the same time, compared with scientific and technological academic papers, humanities and social science academic papers have more content. To express richness and diversity and other characteristics, academic papers in the humanities and social sciences can follow the basic provisions of this document and further expand according to the characteristics of the discipline. Step by step to formulate specific writing specifications. This document checks and updates the content of academic papers in GB/T 7713-1987 necessary to form a separate academic It replaces the format of academic papers in GB/T 7713-1987. Rules for Writing Academic Papers

1 Scope

This document specifies the components of academic papers, as well as the basic requirements and formats for writing and arranging. This document applies to academic papers in all forms of communication, including print, microform, and electronic versions. Academic papers in different disciplines or fields can be Refer to this document to formulate the writing norms of this discipline or field.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB 3100 International system of units and its application GB/T 3101 General Principles Relating to Quantities, Units and Symbols GB/T 3102 (all parts) Quantities and units GB/T 6447 Abstract Writing Rules GB/T 7408 Data elements and exchange formats Information exchange date and time representation GB/T 7714 Information and bibliographic reference description rules GB/T 8170 Numerical rounding off rules and expression and determination of limit values GB/T 15834 Usage of Punctuation Marks Number usage in GB/T 15835 publications GB/T 19996 Public edition paper map quality assessment GB/T 28039 Chinese phonetic alphabet spelling rules for Chinese names CY/T 35 Chapter numbering method of technical books and periodicals CY/T 119 Academic Publishing Specifications Scientific and Technical Terms CY/T 121 Scholarly Publishing Specification Notes CY/T 170 Scholarly Publishing Specification Form CY/T 171 Scholarly Publishing Specification Illustrations CY/T 173 Academic Publishing Standard Keyword Writing Rules ISO 80000-1 Quantities and units Part 1.General (Quantitiesandunits-Part 1.General) ISO 80000-2 Quantities and units Part 2.Mathematics (Quantitiesandunits-Part 2.Mathematics)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 academic paper After conducting research on academic issues in a certain subject area, record the process, methods and results of scientific research for academic exchanges, Written material for discussion or publication, or for other purposes. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7713.2-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7713.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7713.2-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7713.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.