|
Std ID |
Description (Standard Title) |
Detail |
|
YS/T 875-2013
|
Coated aluminium alloy sheets and strips with high reflectivty used for lamp brackets
|
YS/T 875-2013
|
|
YS/T 876-2013
|
Standard practice for extrusion solution heat treatment for wrought aluminium alloys
|
YS/T 876-2013
|
|
YS/T 877-2013
|
Nickel-plated shell for rechargeable battery
|
YS/T 877-2013
|
|
YS/T 878-2013
|
Continuous belt type reduction furnace for sintering
|
YS/T 878-2013
|
|
YS/T 879-2013
|
Anino dithiophosphate
|
YS/T 879-2013
|
|
YS/T 880-2013
|
Sodium di-sec-butyl dithiophosphate
|
YS/T 880-2013
|
|
YS/T 881-2013
|
The dominated smelting nickel substrate material
|
YS/T 881-2013
|
|
YS/T 88-1995
|
(Copper, lead anode slime chemical analysis. Fire Assay gravimetric determination of gold and silver)
|
YS/T 88-1995
|
|
YS/T 882-2013
|
Lead antimony concentrates
|
YS/T 882-2013
|
|
YS/T 883-2013
|
Zinc concentrate roasting
|
YS/T 883-2013
|
|
YS/T 884-2013
|
Niobium ingot
|
YS/T 884-2013
|
|
YS/T 885-2013
|
Titanium and titanium alloy forging blank
|
YS/T 885-2013
|
|
YS/T 886-2013
|
Unalloyed titanium profiles
|
YS/T 886-2013
|
|
YS/T 887-2013
|
Ziconium and ziconium alloy welding wires
|
YS/T 887-2013
|
|
YS/T 888-2013
|
Classification for scrap wires and cables
|
YS/T 888-2013
|
|
YS/T 889-2013
|
Reproduced nickel powder for powder metallurgy
|
YS/T 889-2013
|
|
YS/T 890-2013
|
Recycled cobalt powder for powder metallurgy
|
YS/T 890-2013
|
|
YS/T 891-2013
|
Methods for chemical analysis of high purity titanium. Determination of trace impurity element content. Glow discharge mass spectrometry
|
YS/T 891-2013
|
|
YS/T 89-1995
|
Calcined α-alumina
|
YS/T 89-1995
|
|
YS/T 89-2011
|
Calcined α-alumina
|
YS/T 89-2011
|
|
YS/T 892-2013
|
Methods for chemical analysis of high purity titanium. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry
|
YS/T 892-2013
|
|
YS/T 893-2013
|
High-purity sputtering titanium target used in electronic film
|
YS/T 893-2013
|
|
YS/T 894-2013
|
Ammonium perrhenate
|
YS/T 894-2013
|
|
YS/T 895-2013
|
Methods for chemical analysis of high purity rhenium. Determination of trace impurity element content. Glow discharge mass spectrometry
|
YS/T 895-2013
|
|
YS/T 896-2013
|
Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry
|
YS/T 896-2013
|
|
YS/T 897-2013
|
Methods for chemical analysis of high purity niobium. Determination of trace impurity element content. Glow discharge mass spectrometry
|
YS/T 897-2013
|
|
YS/T 898-2013
|
Methods for chemical analysis of the high purity tantalum. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry
|
YS/T 898-2013
|
|
YS/T 899-2013
|
Methods for chemical analysis of high purity tantalum. Determination of trace impurity element content. Glow discharge mass spectrometry
|
YS/T 899-2013
|
|
YS/T 900-2013
|
Methods for chemical analysis of the high purity tungsten. Determination of trace impurity element content. Inductively coupled plasma mass spectrometry
|
YS/T 900-2013
|
|
YS/T 901-2013
|
Methods for chemical analysis of high purity tungsten. Determination of trace impurity element content. Glow discharge mass spectrometry
|
YS/T 901-2013
|
|
YS/T 90-1995
|
(Aluminum and aluminum alloy casting strip)
|
YS/T 90-1995
|
|
YS/T 90-2002
|
Aluminium and aluminium-alloy roll-casting strip
|
YS/T 90-2002
|
|
YS/T 90-2008
|
Aluminium and aluminium-alloy roll-casting strip
|
YS/T 90-2008
|
|
YS/T 867-2013
|
Silver-plated (silver nickel composite plating) of copper and copper alloy wire
|
YS/T 867-2013
|
|
YS/T 868-2013
|
Brass wires for unidirectional travelling electrical-discharge machining
|
YS/T 868-2013
|
|
YS/T 869-2013
|
Chemical analysis of 4A-Zeolite. X-ray fluorescence spectrometric method
|
YS/T 869-2013
|
|
YS/T 870-2013
|
Chemical analysis of high purity aluminium. Determination of trace impurities. Inductively coupled plasma mass spectrometry
|
YS/T 870-2013
|
|
YS/T 871-2013
|
Chemical analysis of high purity aluminium. Determination of trace impurities. Glow discharge mass spectrometry
|
YS/T 871-2013
|
|
YS/T 87-1995
|
(Copper, lead anode slime gold, silver Sampling and Preparation Methods)
|
YS/T 87-1995
|
|
YS/T 87-2009
|
Methods for sampling and sample perparation of copper anode slime and lead anode slime
|
YS/T 87-2009
|
|
YS/T 872-2013
|
Methods for chemical analysis gallium. Determination of mercury in industrial gallium. Atomic fluorescence spectrometer method
|
YS/T 872-2013
|
|
YS/T 873-2013
|
Specification of polishing coating on aluminum ally
|
YS/T 873-2013
|
|
YS/T 874-2013
|
Ultrasonic inspection of wrought aluminium alloy columniform ingots by the water immersion method
|
YS/T 874-2013
|
|
YS/T 902-2013
|
Methods for chemical analysis of high purity rhenium and ammonium perrhenate. Determination of beryllium, sodium, magnesium, aluminum, potassium, calcium, titanium, chromium, manganese, iron, cobalt, nickel, copper, zinc, arsenic, molybdenum, cadmium, ind
|
YS/T 902-2013
|
|
YS/T 903.1-2013
|
Method for chemical analysis of indium scraps. Part 1: Determination of indium content. EDTA titration
|
YS/T 903.1-2013
|
|
YS/T 903.2-2013
|
Method for chemical analysis of indium scraps. Part 2: Determination of tin content. Iodometric titration
|
YS/T 903.2-2013
|
|
YS/T 904.1-2013
|
Methods for chemical analysis of iron-chromium-aluminum fiber. Part 1: Determination of nitrogen content. Inert gas fusion thermal conductivity method
|
YS/T 904.1-2013
|
|
YS/T 904.2-2013
|
Methods for chemical analysis of iron-chromium-aluminum fiber. Part 2: Determination of chromium and aluminum content. Inductively coupled plasma atomic emission spectrometry
|
YS/T 904.2-2013
|
|
YS/T 904.3-2013
|
Methods for chemical analysis of iron-chromium-aluminum fiber. Part 3: Determination of silicon, manganese, titanium, copper, lanthanum and cerium content. Inductively coupled plasma atomic emission spectrometry
|
YS/T 904.3-2013
|
|
YS/T 904.4-2013
|
Methods for chemical analysis of iron-chromium-aluminum fiber. Part 4: Determination of phosphorus content. Molybdenum blue spectrophotometry
|
YS/T 904.4-2013
|
|
YS/T 904.5-2013
|
Methods for chemical analysis of iron-chromium-aluminum fiber. Part 5: Determination of carbon and sulfur content. High-frequency infrared absorption method
|
YS/T 904.5-2013
|
|
YS/T 905-2013
|
Lithium-boron alloy
|
YS/T 905-2013
|
|
YS/T 906-2013
|
Aluminum alloy clad strips for air cooled condenser of power station
|
YS/T 906-2013
|
|
YS/T 907-2013
|
Aluminium alloy sheets and plates for railway traffic
|
YS/T 907-2013
|
|
YS/T 908-2013
|
Nickel and nickel alloy sheet, strip and rods for vacuum electron devices
|
YS/T 908-2013
|
|
YS/T 909-2013
|
Oxygen free copper tube for vacuum electron devices
|
YS/T 909-2013
|
|
YS/T 910-2013
|
Determination of copper content for brass. lodimetry
|
YS/T 910-2013
|
|
YS/T 911-2013
|
U-Bend seamless copper and copper alloys tubes
|
YS/T 911-2013
|
|
YS/T 91-1995
|
(Cap aluminum and aluminum alloy plate, strip)
|
YS/T 91-1995
|
|
YS/T 91-2002
|
(Cap aluminum and aluminum alloy plate, strip)
|
YS/T 91-2002
|
|
YS/T 91-2009
|
Wrought aluminium and aluminium alloy sheets, strips and foils for capsule
|
YS/T 91-2009
|
|
YS/T 912-2013
|
Anode pure copper shot
|
YS/T 912-2013
|
|
YS/T 913-2013
|
Zirconium and zirconium alloy discs and rings
|
YS/T 913-2013
|
|
YS/T 914-2013
|
Aluminum case for power lithium battery
|
YS/T 914-2013
|
|
YS/T 915-2013
|
The lead antimony alloys ingot for the accumulator cell slab lattice
|
YS/T 915-2013
|
|
YS/T 916-2013
|
High purity cadmium
|
YS/T 916-2013
|
|
YS/T 917-2013
|
Chemical analysis methods for high purity cadmium.Determination of trace impurity elements content.Glow discharge mass spectrometry
|
YS/T 917-2013
|
|
YS/T 918-2013
|
Ultra purity mercury
|
YS/T 918-2013
|
|
YS/T 919-2013
|
High purity copper ingot
|
YS/T 919-2013
|
|
YS/T 9-1991
|
(Anode carbon block stacking unit)
|
YS/T 9-1991
|
|
YS/T 9-2008
|
Anode stacking crane
|
YS/T 9-2008
|
|
YS/T 920-2013
|
High purity zinc
|
YS/T 920-2013
|
|
YS/T 921-2013
|
Copper matte
|
YS/T 921-2013
|
|
YS/T 92-1995
|
Aluminium alloy lattice grid
|
YS/T 92-1995
|
|
YS/T 922-2013
|
Methods for chemical analysis of high purity copper. Determination of trace impurity elements content. Glow discharge mass spectrometry
|
YS/T 922-2013
|
|
YS/T 923.1-2013
|
Methods for chemical analysis of high purity bismuth. Part 1: Determination of copper, lead, zinc, iron, silver, arsenic, tin, cadmium, magnesium, chromium, aluminum, gold and nickel content. Inductively coupled plasma-mass spectrum method
|
YS/T 923.1-2013
|
|
YS/T 923.2-2013
|
Methods for chemical analysis of high purity bismuth. Part 2: Determination of trace impurity elements content. Glow discharge mass spectrometry
|
YS/T 923.2-2013
|
|
YS/T 924-2013
|
Safety specification for hydrophilic aluminium foils production
|
YS/T 924-2013
|
|
YS/T 925-2013
|
Deoxidization nickle powder
|
YS/T 925-2013
|
|
YS/T 926-2013
|
High purity tellurium dioxide
|
YS/T 926-2013
|
|
YS/T 927-2013
|
Bismuth trioxide
|
YS/T 927-2013
|
|
YS/T 928.1-2013
|
Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide. Part 1: Determination of chloride ion contents. Silver chloride turbidimetry
|
YS/T 928.1-2013
|
|
YS/T 928.2-2013
|
Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide. Part 2: Determination of nickel cntents. Dimethylglyoxime gravimetric
|
YS/T 928.2-2013
|
|
YS/T 928.3-2013
|
Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide. Part 3: Determination of nickel, cobalt, manganese content. Inductively coupled plasma atomic emission spectromertric
|
YS/T 928.3-2013
|
|
YS/T 928.4-2013
|
Methods for chemical analysis of nickel cobalt manganese composite hydrogen oxide - Part 4: Determination of iron, calcium, magnesium, copper, zinc, silicon, aluminium, sodium contents - Inductively coupled plasma atomic emission spectrometric
|
YS/T 928.4-2013
|
|
YS/T 928.5-2013
|
Methods for chemical analysis of nickel cobalt manganese composite hydroxide. Part 5: Determination of lead contents. Inductively coupled plasma mass spectrometry
|
YS/T 928.5-2013
|
|
YS/T 928.6-2013
|
Methods for chemical analysis of nickel cobalt manganese composite hydroxide. Part 6: Determination of sulfate ion contents. Ion chromatography
|
YS/T 928.6-2013
|
|
YS/T 929-2013
|
Palladium acetate(Ⅱ)
|
YS/T 929-2013
|
|
YS/T 930-2013
|
Tetraammine dichloropalladium(Ⅱ)
|
YS/T 930-2013
|
|
YS/T 931-2013
|
Palladium(Ⅱ)nitrate
|
YS/T 931-2013
|
|
YS/T 93-1996
|
Code for paste soft solder
|
YS/T 93-1996
|
|
YS/T 93-2015
|
Paste soft solder specification
|
YS/T 93-2015
|
|
YS/T 932-2013
|
Platinum nitrate
|
YS/T 932-2013
|
|
YS/T 933-2013
|
Rhodium(Ⅱ)octanoate dimer
|
YS/T 933-2013
|
|
YS/T 934-2013
|
Plates or sheets of oxides dispersion strengthened platinum and platinum-rhodium
|
YS/T 934-2013
|
|
YS/T 935-2013
|
Standard guide for analysis and reporting the impurity content and grade of high purity metallic sputtering targets for electronic thin film applications
|
YS/T 935-2013
|
|
YS/T 936-2013
|
Sputtering nickel vanadium alloy target used in integrated circuit device
|
YS/T 936-2013
|
|
YS/T 937-2013
|
Nickel-platinum target
|
YS/T 937-2013
|
|
YS/T 938.1-2013
|
Chemical analysis methods of gold alloys and palladium alloys for dental ceramic restoration. Part 1: Determination of gold content. Gravimetry by sodium nitrite reduction
|
YS/T 938.1-2013
|
|
YS/T 938.2-2013
|
Chemical analysis methods of gold alloys and palladium alloys for dental ceramic restoration. Part 2: Determination of palladium content. Dimethylglyoxime gravimetry
|
YS/T 938.2-2013
|