|
Std ID |
Description (Standard Title) |
Detail |
|
YS/T 809-2012
|
Copper and copper alloy special-shaped strip for socket connector
|
YS/T 809-2012
|
|
YS/T 810-2012
|
Recycling copper strips for electrical purposes
|
YS/T 810-2012
|
|
YS/T 811-2012
|
Copper plate for stave
|
YS/T 811-2012
|
|
YS/T 81-1994
|
(High-purity platinum sponge)
|
YS/T 81-1994
|
|
YS/T 81-2006
|
High pure sponge platinum
|
YS/T 81-2006
|
|
YS/T 812-2012
|
Oxygen free copper bar and wire for vacuum electron devices
|
YS/T 812-2012
|
|
YS/T 813-2012
|
Methods of sampling and sample preparation for chemical composition analysis of waste miscellaneous brass
|
YS/T 813-2012
|
|
YS/T 814-2012
|
Test method for stress corrosion resistance of brass finished products
|
YS/T 814-2012
|
|
YS/T 815-2012
|
Preparation method of test pieces for mechanical and technological properties of copper and copper alloys
|
YS/T 815-2012
|
|
YS/T 816-2012
|
High purity selenium
|
YS/T 816-2012
|
|
YS/T 817-2012
|
High purity tellurium
|
YS/T 817-2012
|
|
YS/T 818-2012
|
High purity bismuth
|
YS/T 818-2012
|
|
YS/T 819-2012
|
High-purity sputtering copper target used in electronic film
|
YS/T 819-2012
|
|
YS/T 8-1991
|
(Ingots hydraulic semi-continuous casting machine)
|
YS/T 8-1991
|
|
YS/T 820.10-2012
|
Methods for chemical analysis of laterite nickel ores - Part 10: Determination of calcium, cobalt, copper, magnesium, manganese, nickel, phosphate and zinc content - Inductively coupled plasma atomic emission spectrometry
|
YS/T 820.10-2012
|
|
YS/T 820.11-2012
|
Methods for chemical analysis of laterite nickel ores. Part 11: Determination of fluorine and chlorine contents. Ion chromatography
|
YS/T 820.11-2012
|
|
YS/T 820.1-2012
|
Methods for chemical analysis of laterite nickel ores - Part 1: Determination of nickel content - Flame atomic absorption spectrometry
|
YS/T 820.1-2012
|
|
YS/T 820.12-2012
|
Methods for chemical analysis of laterite nickel ores. Part 12: Determination of manganese content. Flame atomic absorption spectrometry
|
YS/T 820.12-2012
|
|
YS/T 820.13-2012
|
Methods for chemical analysis of laterite nickel ores. Part 13: Determination of lead content. Flame atomic absorption spectrometry
|
YS/T 820.13-2012
|
|
YS/T 820.14-2012
|
Methods for chemical analysis of laterite nickel ores. Part 14: Determination of zinc content. Flame atomic absorption spectrometry
|
YS/T 820.14-2012
|
|
YS/T 820.15-2012
|
Methods for chemical analysis of laterite nickel ores. Part 15: Determination of cadmium content. Flame atomic absorption spectrometry
|
YS/T 820.15-2012
|
|
YS/T 820.16-2012
|
Methods for chemical analysis of laterite nickel ores - Part 16: Determination of carbon and sulfur content - High frequency combustion with infrared absorption spectrometry
|
YS/T 820.16-2012
|
|
YS/T 820.17-2012
|
Methods for chemical analysis of laterite nickel ores. Part 17: Determination of arsenic, antimony and bismuth contents. Hydride generation-atomic fluorescence spectrometry
|
YS/T 820.17-2012
|
|
YS/T 820.18-2012
|
Methods for chemical analysis of laterite nickel ores. Part 18: Determination of mercury content. Cold atomic absorption spectrometry
|
YS/T 820.18-2012
|
|
YS/T 820.19-2012
|
Methods for chemical analysis of laterite nickel ores. Part 19: Determination of aluminum, chromium, iron, magnesium, manganese, nickel and silicon contents. Energy-dispersive X-ray fluorescence spectrometry
|
YS/T 820.19-2012
|
|
YS/T 820.20-2012
|
Methods for chemical analysis of laterite nickel ores. Part 20: Determination of aluminum content. EDTA titration
|
YS/T 820.20-2012
|
|
YS/T 820.21-2013
|
Methods for chemical analysis of laterite nickel ores. Part 21: Determination of chromium content. The ammonium-ferrous sulfate titration method
|
YS/T 820.21-2013
|
|
YS/T 820.2-2012
|
Methods for chemical analysis of laterite nickel ores. Part 2: Determination of nickel content. Dimethylglyoxime spectrophotometry
|
YS/T 820.2-2012
|
|
YS/T 820.22-2012
|
Methods for chemical analysis of laterite nickel ores. Part 22: Determination of magnesium content. EDTA titration
|
YS/T 820.22-2012
|
|
YS/T 820.23-2012
|
Methods for Chemical Analysis of Laterite Nickel Ores - Part 23: Determination of Cobalt, Iron, Nickel, Phosphorus, Aluminium Oxide, Calcium Oxide, Chromium Oxide, Magnesium Oxide, Manganese Oxide, Silicon Dioxide and Titanium Dioxide Content - Wavelength Dispersive X-ray Fluorescence Spectrometry
|
YS/T 820.23-2012
|
|
YS/T 820.24-2012
|
Methods for chemical analysis of laterite nickel ores. Part 24: Determination hygroscopic moisture content. Gravimetric method
|
YS/T 820.24-2012
|
|
YS/T 820.25-2012
|
Methods for chemical analysis of laterite nicekel ores. Part 25: Determination of combined water content. Gravimetric method
|
YS/T 820.25-2012
|
|
YS/T 820.26-2012
|
Methods for chemical analysis of laterite nickel ores. Part 26: Determination of loss on ignition. Gravimetric method
|
YS/T 820.26-2012
|
|
YS/T 820.3-2012
|
Methods for chemical analysis of laterite nickel ores - Part 3: Determination of total iron content - Potassium dichromate titration
|
YS/T 820.3-2012
|
|
YS/T 820.3-2013
|
[YS/T 820.3-2012] Chemical analysis of nickel laterite Part 3: Determination of total iron content of potassium dichromate titration
|
YS/T 820.3-2013
|
|
YS/T 820.4-2012
|
Methods for chemical analysis of laterite nickel ores. Part 4: Determination of phosphorus content. Phosphorus molybdenum blue spectrophotometry
|
YS/T 820.4-2012
|
|
YS/T 820.5-2012
|
Methods for chemical analysis of laterite nickel ores. Part 5: Determination of cobalt content. Flame atomic absorption spectrometry
|
YS/T 820.5-2012
|
|
YS/T 820.6-2012
|
Methods for chemical analysis of laterite nickel ores. Part 6: Determination of copper content. Flame atomic absorption spectrometry
|
YS/T 820.6-2012
|
|
YS/T 820.7-2012
|
Methods for chemical analysis of laterite nickel ores. Part 7: Determination of calcium and magnesium content. Flame atomic absorption spectrometry
|
YS/T 820.7-2012
|
|
YS/T 820.8-2012
|
Methods for Chemical Analysis of Laterite Nickel Ores - Part 8: Determination of Silica Content - Potassium Silica fluoride Titrimetric Method
|
YS/T 820.8-2012
|
|
YS/T 820.9-2012
|
Methods for chemical analysis of lateritic nickel ore. Part 9: Determination of scandium and cadmium contents. Inductively coupled plasma mass spectrometry
|
YS/T 820.9-2012
|
|
YS/T 821-2012
|
Aluminum alloy cover board for battery
|
YS/T 821-2012
|
|
YS/T 82-1994
|
(Spectroscopy platinum substrate)
|
YS/T 82-1994
|
|
YS/T 82-2006
|
Basis platinum as spectral analysis
|
YS/T 82-2006
|
|
YS/T 822-2012
|
NiCr-Cr3C2 composite powders
|
YS/T 822-2012
|
|
YS/T 823-2012
|
Sintered tungsten plate blank
|
YS/T 823-2012
|
|
YS/T 824-2012
|
Aluminum-tin masteralloy for titanium alloy
|
YS/T 824-2012
|
|
YS/T 825-2012
|
Lithium titanium oxide
|
YS/T 825-2012
|
|
YS/T 826-2012
|
Niobium pentoxide target material
|
YS/T 826-2012
|
|
YS/T 827-2012
|
Tantalum ingot
|
YS/T 827-2012
|
|
YS/T 828-2012
|
Titanium anodes for use in cathodic protection of soils or natural waters
|
YS/T 828-2012
|
|
YS/T 829-2012
|
Battery grade lithium-silicon alloy
|
YS/T 829-2012
|
|
YS/T 830-2012
|
N-butyllithium
|
YS/T 830-2012
|
|
YS/T 831-2012
|
TZM molybdenum alloy bars
|
YS/T 831-2012
|
|
YS/T 83-1994
|
(Spectroscopy with Palladium)
|
YS/T 83-1994
|
|
YS/T 83-2006
|
Basis palladium as spectral analysis
|
YS/T 83-2006
|
|
YS/T 832-2012
|
Determination of rhodium in spent oxo. Alcohols catalyst. Inductively coupled plasma atomic emission spectrometry
|
YS/T 832-2012
|
|
YS/T 833-2012
|
Methods for chemical analysis of ammonium rhenate. Determination of beryllium, magnesium, aluminium, potassium, calcium, titanium, chromium, manganese, iron, cobalt, copper, zinc and molybdenum contents in ammonium rhenate. Inductively coupled plasma atom
|
YS/T 833-2012
|
|
YS/T 834-2012
|
Determination of loss on ignition in reforming spent platinum catalyst
|
YS/T 834-2012
|
|
YS/T 835-2012
|
Determination of platinum, palladium and rhodium in exhaust purfication metallic substrate auto-catalysts. Flame atomic absorption spectrometry
|
YS/T 835-2012
|
|
YS/T 836-2012
|
Perrhenic acid
|
YS/T 836-2012
|
|
YS/T 837-2012
|
Standard practice for ultrasonic C-scan bond evaluation of sputtering target-backing plate assemblies
|
YS/T 837-2012
|
|
YS/T 838-2012
|
Cadmium telluride
|
YS/T 838-2012
|
|
YS/T 839-2012
|
Test method for measurement of insulator thickness and refractive index on silicon substrates by ellipsometry
|
YS/T 839-2012
|
|
YS/T 840-2012
|
Classification and technical specification for renewable crystal silicon
|
YS/T 840-2012
|
|
YS/T 841-2012
|
The technical requirements for assessment of cleaner production performance in magnesium smelting industry
|
YS/T 841-2012
|
|
YS/T 84-1994
|
(Spectroscopy using iridium substrate)
|
YS/T 84-1994
|
|
YS/T 84-2006
|
Basis iridium as spectral analysis
|
YS/T 84-2006
|
|
YS/T 842-2012
|
Petroleum coke for graphitized cathode carbon block
|
YS/T 842-2012
|
|
YS/T 843-2012
|
Petroleum coke for pre-baked anode
|
YS/T 843-2012
|
|
YS/T 844-2012
|
Technical specification for assembling process of architecture aluminium alloy profiles with thermal barrier strip
|
YS/T 844-2012
|
|
YS/T 845-2012
|
Aluminum alloy round billets by spray forming
|
YS/T 845-2012
|
|
YS/T 846-2012
|
Aluminium foils for cigarette packaging
|
YS/T 846-2012
|
|
YS/T 847-2012
|
High strength aluminum alloy tubes for tent
|
YS/T 847-2012
|
|
YS/T 848-2012
|
Aluminium and aluminium alloy concatenation casting-rolled drawing stock
|
YS/T 848-2012
|
|
YS/T 849-2012
|
Coated aluminium foils for rigid phenolic foam sandwich panel
|
YS/T 849-2012
|
|
YS/T 850-2012
|
Aluminium-steel cladding transition joint
|
YS/T 850-2012
|
|
YS/T 851-2012
|
Technical specification for on-line rotating degassing system used for aluminium and aluminium alloy melts
|
YS/T 851-2012
|
|
YS/T 85-1994
|
(Spectroscopy with rhodium matrix)
|
YS/T 85-1994
|
|
YS/T 85-2006
|
Basis rhodium as spectral analysis
|
YS/T 85-2006
|
|
YS/T 852-2012
|
Aluminium and aluminium alloy foils for household
|
YS/T 852-2012
|
|
YS/T 853-2012
|
Zirconium and zirconium alloy castings
|
YS/T 853-2012
|
|
YS/T 854-2012
|
Tungsten iridium nozzle
|
YS/T 854-2012
|
|
YS/T 855-2012
|
Gold prill
|
YS/T 855-2012
|
|
YS/T 856-2012
|
Silver prill
|
YS/T 856-2012
|
|
YS/T 857-2012
|
Silver bar
|
YS/T 857-2012
|
|
YS/T 858-2013
|
Zircon concentrate
|
YS/T 858-2013
|
|
YS/T 859-2013
|
Linear and superelastic titanium nickel alloy bar and wire
|
YS/T 859-2013
|
|
YS/T 860-2013
|
Vanadium pentoxide used for non-ferrous master alloy and catalyst
|
YS/T 860-2013
|
|
YS/T 861.1-2013
|
Mehtods for chemical analysis of niobium-titanium alloy. Part 1: Determination of aluminium, nickel, silicon, iron, chromium, copper and tantalum content. Inductively coupled plasma atomic emission spectrometry
|
YS/T 861.1-2013
|
|
YS/T 861.2-2013
|
Methods for chemical analysis of niobium-titanium alloy. Part 2: Determination of oxygen and nitrogen content. Inert gas fusion infrared/thermal conductivity method
|
YS/T 861.2-2013
|
|
YS/T 861.3-2013
|
Methods for chemical analysis of niobium-titanium alloy. Part 3: Determination of hydrogen content. Inert gas fusion thermal conductivity method
|
YS/T 861.3-2013
|
|
YS/T 861.4-2013
|
Methods for chemical analysis of niobium-titanium alloy. Part 4: Determination of carbon content. The high-frequency infrared absorption method
|
YS/T 861.4-2013
|
|
YS/T 861.5-2013
|
Methods for chemical analysis of niobium-titanium alloy. Part 5: Determination of titanium content-The ammonium ferric sulfate titration
|
YS/T 861.5-2013
|
|
YS/T 86-1994
|
(Marine welding aluminum profiles dimensions and sectional properties)
|
YS/T 86-1994
|
|
YS/T 862-2013
|
Recycling casting lead brass profile
|
YS/T 862-2013
|
|
YS/T 863-2013
|
Copper profiles for computer heat sink
|
YS/T 863-2013
|
|
YS/T 864-2013
|
Method of slab band tinsel surface cleanliness analysis of copper and copper alloys
|
YS/T 864-2013
|
|
YS/T 865-2013
|
Copper and copper-alloy seamless tubes with high fins
|
YS/T 865-2013
|
|
YS/T 866-2013
|
Lead-free tin-based spraying wire for capacitor end face
|
YS/T 866-2013
|