|
Std ID |
Description (Standard Title) |
|
YS/T 428-2012
|
Niobium pentoxide
|
|
YS/T 429.1-2000
|
Aluminum curtain wall board. Based board
|
|
YS/T 429.1-2014
|
Aluminum curtain wall panel. Part 1: Mill finish sheet and strip
|
|
YS/T 429.2-2000
|
Aluminum curtain wall board. Fluorocarbon painted aluminum veneer
|
|
YS/T 429.2-2012
|
Aluminum curtain wall panel. Part 2: Aluminum panel with organic polymer coating
|
|
YS/T 430-2000
|
Aluminium foil for cable
|
|
YS/T 431-2000
|
Aluminum and aluminum alloys. Coil coated sheet and strip
|
|
YS/T 431-2009
|
Aluminium and aluminium alloys. Coil coated sheet and strip
|
|
YS/T 43-1992
|
(High-purity arsenic)
|
|
YS/T 43-2011
|
High-purity arsenic
|
|
YS/T 432-2000
|
Aluminium strip for aluminium-plastic composite panel
|
|
YS/T 433-2001
|
Silver concentrate
|
|
YS/T 433-2016
|
Silver concentrate
|
|
YS/T 434-2000
|
(Aluminum plastic composite pipe and aluminum strip)
|
|
YS/T 434-2009
|
Aluminium and aluminium alloys strip and foil for aluminium-plastic composite tube
|
|
YS/T 435-2000
|
(Cans tank with aluminum alloy strip)
|
|
YS/T 435-2009
|
Wrought aluminium alloys strips for can-body of easy open convenience can
|
|
YS/T 436-2000
|
The Aluminum Profiles pattern Atlas
|
|
YS/T 437-2000
|
(Aluminum sectional geometry algorithms and computer programs require)
|
|
YS/T 437-2009
|
Moment of inertia calculation methods and computing software requirements of aluminium profiles
|
|
YS/T 438.1-2001
|
Methods for physical performance determination of sandy alumina. Determination of size distribution. Sieving method
|
|
YS/T 438.1-2013
|
Methods for physical performance determination of sandy alumina. Part 1: Determination of size distribution-sieving method
|
|
YS/T 438.2-2001
|
Methods for physical performance determination of sandy alumina. Determination of the attrition index
|
|
YS/T 438.2-2013
|
Methods for physical performance determination of sandy alumina. Part 2: Determination of the attrition index
|
|
YS/T 438.3-2001
|
Methods for physical performance determination of sandy alumina. Determination of the angle of repose
|
|
YS/T 438.3-2013
|
Methods for physical performance determination of sandy alumina. Part 3: Determination of the angle of repose
|
|
YS/T 438.4-2001
|
Methods for physical performance determination of sandy alumina. Determination of specific surface area. B. E. T. method
|
|
YS/T 438.4-2013
|
Methods for physical performance determination of sandy alumina. Part 4: B.E.T method for determination of specific surface area
|
|
YS/T 438.5-2001
|
Methods for physical performance determination of sandy alumina. Determination of α-alumina content. X-ray diffraction spectrum method
|
|
YS/T 438.5-2013
|
Methods for physical performance determination of Sandy alumina. Part 5: X-ray diffraction spectrum method for detemination of α-alumina content
|
|
YS/T 439-2001
|
Aluminum and aluminum alloy extruded flat stick
|
|
YS/T 439-2012
|
Wrought aluminium and aluminium alloy extruded rectangular bars, plates and sheets
|
|
YS/T 440-2001
|
Inner grooved copper tube
|
|
YS/T 441.1-2001
|
Extractive Metallurgy of non-ferrous metal balance management specification copper beneficiation
|
|
YS/T 441.1-2014
|
Management rules of nonferrous metals balance. Part 1: Copper enrichment and metallurgy
|
|
YS/T 441.2-2001
|
Extractive Metallurgy of non-ferrous metal balance management specification lead beneficiation
|
|
YS/T 441.2-2014
|
Management rules of nonferrous metals balance. Part 2: Lead enrichment and metallurgy
|
|
YS/T 441.3-2001
|
Non-ferrous metal balance management specification zinc the beneficiation smelting part
|
|
YS/T 441.3-2014
|
Management rules of nonferrous metals balance. Part 3: Zinc enrichment and metallurgy
|
|
YS/T 441.4-2001
|
Extractive Metallurgy of non-ferrous metal balance management specification tin beneficiation
|
|
YS/T 441.4-2014
|
Management rules of nonferrous metals balance. Part 4: Tin enrichment and metallurgy
|
|
YS/T 441.5-2001
|
Non-ferrous metals the balanced management norms gold, silver smelting section
|
|
YS/T 441.5-2014
|
Management rules of nonferrous metals balance. Part 5: Gold and silver metallurgy
|
|
YS/T 44-1992
|
(High-purity tin)
|
|
YS/T 44-2011
|
High-purity tin
|
|
YS/T 442-2001
|
Non-ferrous metals industrial measuring devices A, B, C classification management specification
|
|
YS/T 443-2001
|
Inspection, measuring and test equipment for copper processing enterprises with guidelines
|
|
YS/T 444-2001
|
Aluminum processing enterprises of inspection, measuring and test equipment with specification
|
|
YS/T 445.1-2001
|
Methods for chemical analysis of silver concentrates. Determination of gold and silver contents
|
|
YS/T 445.2-2001
|
Methods for chemical analysis of silver concentrates. Determination of copper content
|
|
YS/T 445.3-2001
|
Methods for chemical analysis of silver concentrates. Determination of arsenic and bismuth contents
|
|
YS/T 445.4-2001
|
Methods for chemical analysis of silver concentrates. Determination of oxide aluminum content
|
|
YS/T 445.5-2001
|
Methods for chemical analysis of silver concentrates. Determination of sulfur content
|
|
YS/T 445.6-2001
|
Methods for chemical analysis of silver concentrates. Determination of magnesium oxide content
|
|
YS/T 445.7-2001
|
Methods for chemical analysis of silver concentrates. Determination of lead content
|
|
YS/T 445.8-2001
|
Methods for chemical analysis of silver concentrates. Determination of zinc content
|
|
YS/T 445.9-2001
|
Methods for chemical analysis of silver concentrates. Determination of lead and zinc contents
|
|
YS/T 446-2002
|
Aluminium alloy laminated foil for brazing type heater exchanger
|
|
YS/T 446-2011
|
Aluminium alloy composite foils and strips used for brazing type heat exchangers
|
|
YS/T 447.1-2002
|
Aluminium and aluminium alloys grain refiners. Part 1: AI-Ti-B wire
|
|
YS/T 447.1-2011
|
Alloy wires used for the grain refiner for aluminium and aluminium alloys. Part 1: Al-Ti-B wires
|
|
YS/T 447.2-2011
|
Alloy wires used for the grain refiner for aluminium and aluminium alloys. Part 2: Al-Ti-C wires
|
|
YS/T 447.3-2011
|
Alloy wires used for the grain refiner for aluminium and aluminium alloys. Part 3: Al-Ti wires
|
|
YS/T 448-2002
|
Copper and copper alloys inspection method of macrostructure for cast and wrought products
|
|
YS/T 449-2002
|
Copper and copper alloys inspection method of microstructure for cast and wrought products
|
|
YS/T 450-2002
|
Cleanness copper tube for refrigerator industry
|
|
YS/T 450-2013
|
Cleanness copper tube for refrigerator industry
|
|
YS/T 451-2002
|
Poly-lag copper tube
|
|
YS/T 451-2012
|
Copper tubes with plastic-lag
|
|
YS/T 452-2002
|
Lead and zinc bulk concentrate
|
|
YS/T 452-2013
|
Lead and zinc bulk concentrate
|
|
YS/T 453-2002
|
Stainless steel fiber sintering medium
|
|
YS/T 454-2003
|
Aluminium and aluminium alloy bus conductors
|
|
YS/T 455.1-2003
|
Test method for aluminium foil. Part 1: Test method surface tension
|
|
YS/T 455.2-2003
|
Test method for aluminium foil. Part 2: Test method for porosity
|
|
YS/T 455.3-2003
|
Test method for aluminium foil. Part 3: Test method for wettability
|
|
YS/T 455.4-2003
|
Test method for aluminium foil. Part 4: Test method for stickiness
|
|
YS/T 455.5-2003
|
Test method for aluminium foil. Part 5: Test method for direct-current resistance
|
|
YS/T 455.6-2003
|
Test method for aluminium foil. Part 6: Test method for other property
|
|
YS/T 455.7-2006
|
Aluminum foil test methods - Part 7: Determination of aluminum foil thickness weighing method
|
|
YS/T 455.8-2007
|
Aluminium foil test methods. Part 8: Method for measuring cube texture content
|
|
YS/T 456-2003
|
Dry barrier powder refractory for aluminum cell
|
|
YS/T 456-2014
|
Dry barrier powder refractory for aluminum electrolysis cell
|
|
YS/T 457-2003
|
Aluminium coiled sheet for foil (thickness＜0. 01 mm)
|
|
YS/T 457-2012
|
Aluminum and aluminum alloy cold rolled strips for foil-stock
|
|
YS/T 458-2003
|
Welding wire matched to aluminum alloy extruded profiles for railroad vehicle structures
|
|
YS/T 458-2012
|
Aluminum alloy welding wires for transportation vehicles
|
|
YS/T 459-2003
|
Wrought aluminium alloy profiles for architecture with combined coatings of anodic oxide and colorated organic coatings
|
|
YS/T 460-2003
|
High-pressure ring in-the-hole drill rigs
|
|
YS/T 461.10-2003
|
The methods for chemical analysis of lead and zinc bulk concentrates-The determination of gold and silver content-The fire-assaying methods
|
|
YS/T 461.10-2013
|
Methods for chemical analysis of lead and zinc bulk concentrates. Part 10: The determination of gold and silver contents. Fire-assaying methods
|
|
YS/T 461.1-2003
|
The methods for chemical analysis of lead and zinc bulk concentrates-The determination of lead and zinc content-The Na_2EDTA titrmetric method after precipitation separation
|
|
YS/T 461.1-2013
|
Methods for chemical analysis of lead and zinc bulk concentrates. Part 1: The determination of lead and zinc contents. Na2EDTA titrimetric method after precipitation separation
|
|
YS/T 461.12-2016
|
Methods for chemical analysis of lead and zinc bulk concentrates--Part 12: Determination of thallium content--Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
|
|
YS/T 461.2-2003
|
The methods for chemical analysis of lead and zinc bulk concentrates-The determination of iron content-The Na_2EDTA titrmetric method
|
|
YS/T 461.2-2013
|
Methods for chemical analysis of lead and zinc bulk concentrates. Part 2: The determination of iron content. Na2EDTA titrimetric method
|
|
YS/T 461.3-2003
|
The methods for chemical analysis of lead-zinc bulk concentrates-The determination of sulfur content-The combustion-neustralinzation titrmetric method
|
|
YS/T 461.3-2013
|
Methods for chemical analysis of lead and zinc bulk concentrates. Part 3: The determination of sulfur content. Combustion-neustralinzation titrimetric method
|
|
YS/T 461.4-2003
|
The methods for chemical analysis of lead and zinc mixed concentrates-The determination of arsenic content-The iodimetric method
|
|
YS/T 461.4-2013
|
Methods for chemical analysis of lead and zinc bulk concentrates. Part 4: The determination of arsenic content lodimetricic method
|