|
Std ID |
Description (Standard Title) |
|
SJ 20524-1995
|
Measuring methods of shielding effectiveness of materials
|
|
SJ/T 11363-2006
|
Requirements for concentration limits for certain hazardous substances in electronic information products
|
|
SJ/T 11364-2014
|
[Including 2017XG1] Marking for the restriction of the use of hazardous substances in electrical and electronic product
|
|
SJ/Z 11388-2009
|
General guidelines of environment-friendly use period of electronic information products
|
|
SJ 1.2-1987
|
Provision and requirements for preparation and revision of technical standards for electronic industry--Principles and procedures for regulation of standards-preparation plans
|
|
SJ 1.3-1987
|
Development of responsibilities for lead units responsible for technical standards preparation in electronic industry
|
|
SJ 1.4-1987
|
Stages-division and requirements for implementation of standards-preparation in electronic industry
|
|
SJ 1.5-1987
|
Provision and requirements for preparation and revision of technical standards for electronic industry--Procedures for review of standards drafs by correspondence
|
|
SJ 1.6-1987
|
Procedures and provision for submission and approval of technical standards in electronic industry
|
|
SJ 1.7-1987
|
Requirements for complete documents and related materials when standards drafts submitted for approval
|
|
SJ 1.8-1987
|
Provision and requirements for preparation and revision of technical standards for electronic industry--Requirements that should be followed during standards-writing
|
|
SJ 1.9-1987
|
Principles and procedures for return of submitted standards drafts for approval
|
|
SJ 1000-1975
|
Double acting drawing die on press--Drawing punch
|
|
SJ 1001-1975
|
Double acting drawing die on press--First drawing blank holder
|
|
SJ 100-1965
|
(Transformers and choke ring with a core stack thickness series)
|
|
SJ 1002-1975
|
Double acting drawing die on press--Following drawing blank holders
|
|
SJ 1003-1975
|
Double acting drawing die on press--Universal die sets
|
|
SJ 1004-1975
|
Double acting drawing die on press--Upper bracket
|
|
SJ 1005-1975
|
Double acting drawing die on press--Base
|
|
SJ 1006-1975
|
Double acting drawing die on press--Down press plate
|
|
SJ 1007-1975
|
Double acting drawing die on press--Upper press plate
|
|
SJ 1008-1975
|
Double acting drawing die on press--Bolt
|
|
SJ 1009-1975
|
Jig opened with handle--Jig sets
|
|
SJ 1010-1975
|
Jig opened with handle--Jig plate
|
|
SJ 1011-1975
|
Jig opened with handle--Clamps
|
|
SJ 101-1965
|
(Transformers and choke ring intentions type laminations)
|
|
SJ 1012-1975
|
Jig opened with handle--Buckles
|
|
SJ 1013-1975
|
Jig opened with handle--Guide pillars
|
|
SJ 1014-1975
|
Jig opened with handle--Drilling base
|
|
SJ 1015-1975
|
Jig opened with handle--Supporting pillars
|
|
SJ 1016-1975
|
Jig opened with handle--Mould base legs
|
|
SJ 1017-1975
|
Jig opened with handle--Bit holder
|
|
SJ 1018-1975
|
Fixed tubular tantalum capacitors with non-solid electrolyte and porous andode for Type CA30
|
|
SJ 102-1965
|
(Transformers and choke ring intentions thick laminated iron core series)
|
|
SJ 1023-1976
|
Electronic tubes, Type FU-81
|
|
SJ 103-1965
|
(Transformers and choke ring shaped core with)
|
|
SJ 10346-1993
|
(Chinese Industry Standard)
|
|
SJ 1035-1976
|
Picture tubes, Type 23SX5B
|
|
SJ 1036-1976
|
Low noise travelling wave tubes, Type B-1
|
|
SJ 1040-1976
|
Low noise travelling wave tubes, Type B-1
|
|
SJ 1041-1976
|
(Chinese Industry Standard)
|
|
SJ 1041-1982
|
Variable dual-section film dielectric capacitors for Type CBM-202B
|
|
SJ 104-1965
|
(Ring shaped core size series)
|
|
SJ 1050-1976
|
Type and dimensions for caps of electronic tubes
|
|
SJ 1051-1976
|
Reflex klystrons, Type K-19
|
|
SJ 105-1965
|
(Chinese Industry Standard)
|
|
SJ 1052-1976
|
Reflex klystrons, Type K-20
|
|
SJ 1053-1976
|
Reflex klystrons, Type K-27
|
|
SJ 1055-1976
|
Pulsed magnetrons, Type CKM-30
|
|
SJ 1056-1976
|
Pulsed magnetrons, Type CKM-99
|
|
SJ 106-1972
|
(Chinese Industry Standard)
|
|
SJ 10629.6-1995
|
(Change the computer-aided design design document management system design documents)
|
|
SJ 10687-1995
|
A. C. motor capacitors
|
|
SJ 107-1965
|
(Chinese Industry Standard)
|
|
SJ 108-1965
|
(Chinese Industry Standard)
|
|
SJ 109-1965
|
(Chinese Industry Standard)
|
|
SJ 1098-1977
|
(High vacuum evaporation device parameters Series)
|
|
SJ 110-1965
|
(Chinese Industry Standard)
|
|
SJ 1102-1976
|
Detail specification for general-purpose reverse blocking thyristors (general-purpose controlled rectifiers)
|
|
SJ 11115-1997
|
Generic specification for optical mark reader
|
|
SJ 111-1965
|
(Chinese Industry Standard)
|
|
SJ 11151-1997
|
Limits and methods of measurement of interference characteristics of television games
|
|
SJ 1120-1976
|
Electronic tubes, Type FU-7 (M)
|
|
SJ 1121-1976
|
Electronic tubes, Type FU-7 (J)
|
|
SJ 1123-1976
|
Glow character indicator tubes, Type QS30-1
|
|
SJ 11237-2001
|
Uninterruptible power systems (UPS)-General and safety requirements for UPS used in operator access areas
|
|
SJ 11240-2001
|
Information technology. Chinese ideogram coded character set (basic set) -12 dot matrix font
|
|
SJ 11241-2001
|
Information technology. Chinese ideogram coded character set (basic set) -14 dot matrix font
|
|
SJ 11242.1-2001
|
[SJ/T 11242.1-2001] Information technology. Universal multiple-octet coded character set (I Zone) -64-dots matrix font of Chinese ideogram. Part 1: Song ti
|
|
SJ 11242.2-2001
|
[SJ/T 11242.2-2001] Information technology. Universal multiple-octet coded character set (I Zone) -64-dots matrix font of Chinese ideogram. Part 2: Hi ti
|
|
SJ 11242.3-2001
|
[SJ/T 11242.3-2001] Information technology. Universal multiple-octet coded character set (I Zone) -64-dots matrix font of Chinese ideogram. Part 3: Kai ti
|
|
SJ 11242.4-2001
|
[SJ/T 11242.4-2001] Information technology. Universal multiple-octet coded character set (I Zone)-64-dots matrix font of Chinese ideogram. Part 4: Fang Song ti
|
|
SJ 11267-2002
|
Safety requirements for varistors for use in electronic equipment
|
|
SJ 1128-1977
|
(Film screenings electro-acoustic speaker system parameters and requirements)
|
|
SJ 1129-1977
|
Method of measurement of acoustic parameters for loudspeaker system (provisional)
|
|
SJ 11295-2003
|
[SJ/T 11295-2003] Information technology. Universal multiple-octet coded character set (Basic Multilingual plane). 12-dots matrix font of Chinese ideogram
|
|
SJ 11296-2003
|
[SJ/T 11296-2003] Information technology. Universal multiple-octet coded character set (Basic Multilingual plane). 14-dots matrix font of Chinese ideogram
|
|
SJ 11297-2003
|
[SJ/T 11297-2003] Information technology. Universal multiple-octet coded character set (Basic Multilingual plane). 20-dots matrix font of Chinese ideogram
|
|
SJ 11301-2005
|
Information technology - Universal multiple-octet coded character set (Basic multilingual plane) - 12-dots matrix font of Chinese ideogram
|
|
SJ 1130-1977
|
Detail specification for high-voltage silicon rectifier stacks, Type 2DL51~56 and 2CL51~56
|
|
SJ 11302-2005
|
Information technology - Universal multiple-octet coded character set (Basic multilingual plane) - 14-dots matrix font of Chinese ideogram
|
|
SJ 11303-2005
|
Information technology - Universal multiple-octet coded character set (Basic multilingual plane) - 16-dots matrix font of Chinese ideogram
|
|
SJ 1143-1977
|
Low noise travelling wave tubes, Type B-101
|
|
SJ 1145-1977
|
(Chinese Industry Standard)
|
|
SJ 1146-1977
|
(Chinese Industry Standard)
|
|
SJ 1147-1977
|
(Chinese Industry Standard)
|
|
SJ 1148-1977
|
(Chinese Industry Standard)
|
|
SJ 1152-1977
|
Specification for electronic temperature meters for cereal grains
|
|
SJ 1158-1977
|
General-purpose directly heated negative temperature coefficient thermistors for Type MF11
|
|
SJ 1159-1977
|
General-purpose directly heated negative temperature coefficient thermistors for Type MF12
|
|
SJ 1160-1977
|
General-purpose directly heated negative temperature coefficient thermistors for Type MF13
|
|
SJ 1161-1977
|
General-purpose directly heated negative temperature coefficient thermistors for Type MF14
|
|
SJ 1162-1977
|
General-purpose directly heated negative temperature coefficient thermistors for Type MF15
|
|
SJ 1163-1977
|
General-purpose directly heated negative temperature coefficient thermistors for Type MF16
|
|
SJ 1164-1977
|
(Brazing, sealing and labeling method code)
|
|
SJ 1165-1977
|
Phosphor Y6
|
|
SJ 1166-1977
|
(Y8 phosphor)
|
|
SJ 1167-1977
|
(Y10 phosphor)
|
|
SJ 1168-1977
|
Phosphor Y12
|
|
SJ 1169-1977
|
(Y30 phosphor)
|