|
Std ID |
Description (Standard Title) |
|
GB/T 8910.4-2008
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 4: Grinders
|
|
GB/T 8910.5-2008
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 5: Pavement breakers and hammers for construction work
|
|
GB/T 8910.6-2006
|
Hand-held portable power tools -- Measurements of vibrations at the handle -- Part 6: Impact drills
|
|
GB/T 8911-1988
|
Hygienic determination method of carbon monoxide in air of residential areas. Method of replacing mercury
|
|
GB/T 891-1986
|
Lock rings at the end of shaft with screw
|
|
GB/T 8912-1988
|
Hygienic determination method of arsenide in air of residential areas. Silver diethyldithiocar bamate spectrophotometric method
|
|
GB/T 8913-1988
|
Hygienic determination method of sulfur dioxide in air of residential areas. Tetrachloromercurate (TCM)-pararosaniline spectrophotometric method
|
|
GB/T 8914-1988
|
Hygienic determination method of mercury in air of residential areas. Gold amalgamation-atomicabsorption spectrometric method
|
|
GB/T 8916-1988
|
Test procedure on working site for measuring the loading percentage of a three phase induction motor
|
|
GB/T 8917-1988
|
Test method for flexural strength of ceramic tiles
|
|
GB/T 8918-1996
|
Steel wire ropes
|
|
GB/T 8919-1996
|
Wire for steel wire ropes use
|
|
GB/T 89-1976
|
Screws--Technical requirements
|
|
GB/T 892-1986
|
Lock rings at the end of shaft with bolt
|
|
GB/T 8923.1-2011
|
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
|
|
GB/T 8923.2-2008
|
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
|
GB/T 8923.3-2009
|
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
|
GB/T 8923.4-2013
|
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
|
|
GB/T 8923-1988
|
Rust grades and preparation grades of steel surfaces before application of paints and related products
|
|
GB/T 8924-1988
|
Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
|
|
GB/T 8924-2005
|
Test method for flammability characteristics of fiber reinforced plastics -- Oxygen index method
|
|
GB/T 8925-1988
|
Gasoline--Determination of lead-X-ray spectrometry
|
|
GB/T 8926-1988
|
Used lubricating oils--Determination of insolubles
|
|
GB/T 8926-2012
|
Standard test method for insoluble in used lubricating oils
|
|
GB/T 8927-1988
|
Petroleum and liquid petroleum products--Method of measuring the temperature
|
|
GB/T 8927-2008
|
Petroleum and liquid petroleum products -- Temperature measurement -- Manual methods
|
|
GB/T 8928-1988
|
Asphalt materials--Determination of specific gravity and density--Pycnometer method
|
|
GB/T 8928-2008
|
Standard test method for density of semi-solid and solid asphalt
|
|
GB/T 8929-1988
|
Grude oil--Determination of water--Distillation method
|
|
GB/T 8929-2006
|
Crude petroleum -- Determination of water -- Distillation method
|
|
GB/T 893.1-1986
|
Circlips for holes. Type A
|
|
GB/T 893.2-1986
|
Circlips for hole. Type B
|
|
GB/T 8930-1988
|
Criterion of gold and silver bullion
|
|
GB/T 8930-2001
|
Crude gold ingots
|
|
GB/T 8931-1988
|
Test method for the resistance of refractories to slag attack
|
|
GB/T 8931-2007
|
Refractories -- Determination of slag resistance
|
|
GB/T 8933-1988
|
Oil expeller
|
|
GB/T 8934-1988
|
Terminology of property and quality for grain, oil-bearing material and their products
|
|
GB/T 8935-1988
|
Lard for industrial use
|
|
GB/T 8935-2006
|
Rendered pork fat for industrial
|
|
GB/T 8936-1988
|
Bone meal and animal tankage
|
|
GB/T 8937-1988
|
Edible lard
|
|
GB/T 8937-2006
|
Edible lard
|
|
GB/T 8938-1988
|
Typewriter tissue
|
|
GB/T 8938-2008
|
Typewriting paper
|
|
GB/T 8939-2008
|
Sanitary absorbent pads
|
|
GB/T 894.1-1986
|
Circlips for shaft. Type A
|
|
GB/T 894.2-1986
|
Circlips for shaft. Type B
|
|
GB/T 8940.1-1988
|
Paper and board--Measurement of brightness (45/0)
|
|
GB/T 8940.2-1988
|
Pulps--Measurement of brightness
|
|
GB/T 8940.2-2002
|
Pulp -- Preparation of laboratory sheets for the measurement of brightness
|
|
GB/T 8941.1-1988
|
Paper and board--Measurement of specular gloss (20 Degree)
|
|
GB/T 8941.2-1988
|
Paper and board--Measurement of specular gloss (45 Degree)
|
|
GB/T 8941.3-1988
|
Paper and board--Measurement of specular gloss (75 Degree)
|
|
GB/T 8941-2007
|
Paper and board -- Measurement of specular gloss (20 Degree, 45 Degree, 75 Degree)
|
|
GB/T 8941-2013
|
Paper and board -- Measurement of specular gloss
|
|
GB/T 8942-1988
|
Paper--Determination of softness
|
|
GB/T 8942-2002
|
Paper -- Determination of softness
|
|
GB/T 8942-2016
|
Paper -- Determination of softness
|
|
GB/T 8943.1-1988
|
Paper, Board and pulp--Determination of copper content
|
|
GB/T 8943.1-2008
|
Paper, board and pulp -- Determination of copper content
|
|
GB/T 8943.2-1988
|
Paper, board and pulp--Determination of iron content
|
|
GB/T 8943.2-2008
|
Paper, board and pulp -- Determination of iron
|
|
GB/T 8943.3-1988
|
Pulp, paper and board--Determination of manganese
|
|
GB/T 8943.3-2008
|
Paper, board and pulp -- Determination of manganese
|
|
GB/T 8943.4-1988
|
Pulp and paper--Determination of calcium and magnesium
|
|
GB/T 8943.4-2008
|
Paper, board and pulp -- Determination of calcium and magnesium
|
|
GB/T 8944.1-1988
|
Pulps--Determination of saleable mass in lots--Part 1: Pulp baled in sheet form
|
|
GB/T 8944.1-2008
|
Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs
|
|
GB/T 8944.2-1988
|
Pulps--Determination of saleable mass in lots--Part 2: Pulps (such as flash-dried pulp) baled in slabs
|
|
GB/T 8944.2-2008
|
Pulps -- Determination of saleable mass in lots -- Part 2: Unitized bales
|
|
GB/T 8946-1998
|
Plastic woven sack
|
|
GB/T 8946-2013
|
General technical requirements of plastic woven sack
|
|
GB/T 8947-1998
|
Composite plastic woven sack
|
|
GB/T 8948-1994
|
Polyvinyl chloride artificial leather
|
|
GB/T 8948-2008
|
Polyvinyl chloride artificial leather
|
|
GB/T 8949-1995
|
Polyurethane dry-processing artificial leather
|
|
GB/T 8949-2008
|
Polyurethane dry-processing artificial leather
|
|
GB/T 895.1-1986
|
Roundwire snap rings for hole
|
|
GB/T 895.2-1986
|
Roundwire snap rings for shaft
|
|
GB/T 8960-1988
|
Polyester drawn yarn
|
|
GB/T 8960-2001
|
Polyester drawn yarn
|
|
GB/T 8960-2008
|
Polyester drawn yarn
|
|
GB/T 8960-2015
|
Polyester drawn yarns
|
|
GB/T 896-1986
|
“E” rings
|
|
GB/T 8966-2005
|
Burley tobacco
|
|
GB/T 8967-1988
|
Monosodium L-glutamate
|
|
GB/T 8967-2000
|
Monosodium L-glutamate (99% Wei jing)
|
|
GB/T 10952-1989
|
Hobs for parallel side splines
|
|
GB/T 8969-1988
|
Air quality--Determination of nitrogen oxides in ambient air--Griess-saltzman method
|
|
GB/T 8970-1988
|
Air quality--Determination of sulfur dioxide in a ambient air--Tetrachlomercurate (TCM), pararosaniline
|
|
GB/T 8971-1988
|
Air quality. Determination of benzo(a) pyrene in flying bust. Acetylated paper chromatography fluorescence spectrophotometric method
|
|
GB/T 897-1988
|
Double end studs--bm=1d
|
|
GB/T 8972-1988
|
Water quality--Determination of pentachlorophenol--Gas chromatography
|
|
GB/T 8973-1988
|
Mechanical toys--The type of spare parts of toys--Listing method
|
|
GB/T 8973-2000
|
Generic specification for film integrated circuits and hybrid film integrated circuits
|
|
GB/T 8976-1996
|
Generic specification for film integrated circuits and hybrid film integrated circuits
|
|
GB/T 8977-1988
|
300Ω/75Ω balun for FM and TV broadcast receiver
|
|
GB/T 8979-1996
|
Pure nitrogen
|
|
GB/T 10952-2005
|
Hobs for parallel side splines
|