|
Std ID |
Description (Standard Title) |
|
GB/T 4662-2003
|
Rolling bearings -- Static load ratings
|
|
GB/T 4662-2012
|
Rolling bearings -- Static load ratings
|
|
GB/T 4663-1994
|
Rolling bearings. Cylindrical thrust roller bearings. Boundary dimensions
|
|
GB/T 4666-1995
|
Textiles--Woven fabrics--Measurement of length of pieces
|
|
GB/T 4666-2009
|
Textiles -- Fabrics -- Determination of width and length
|
|
GB/T 4667-1995
|
Textiles--Woven fabrics--Measurement of width of pieces
|
|
GB/T 10716-1989
|
Synchronous belt--Test method for tensile properties
|
|
GB/T 4669-1995
|
Textiles--Woven fabrics--Determination of mass per unit length and mass per unit area
|
|
GB/T 10716-2000
|
Synchronous belt drives-Automotive belt-Determination of physical properties
|
|
GB/T 467-1982
|
Electrolytic copper
|
|
GB/T 467-1997
|
Copper cathode
|
|
GB/T 10716-2012
|
Synchronous belt drives -- Automotive belts -- Determination of physical properties
|
|
GB/T 4672-1984
|
Reciprocating internal combustion engines--Hand operated control devices--Standard direction of motion
|
|
GB/T 4672-2003
|
Reciprocating internal combustion engines -- Hand-operated control devices -- Standard direction of motion
|
|
GB/T 4675.1-1984
|
Weldability testing Method of Y-groove cracking test
|
|
GB/T 4675.2-1984
|
Weldability testing--Method of controlled thermal severity cracking test
|
|
GB/T 4675.3-1984
|
Weldability testing--Method of cracking test for welded tee joint
|
|
GB/T 4675.4-1984
|
Weldability testing--Method of FISCO cracking test
|
|
GB/T 4675.5-1984
|
Weldability testing--Testing method of maximum hardness in weld heat-affected zone
|
|
GB/T 4676-1984
|
Method for sampling of conventional abrasive grains
|
|
GB/T 4676-2003
|
Abrasive grains -- Sampling and splitting
|
|
GB/T 4677.10-1984
|
Test method of solderability for printed boards
|
|
GB/T 4677.11-1984
|
Test methods of thermal shock for printed boards
|
|
GB/T 4677.1-1984
|
Test method of surface insulation resistance for printed boards
|
|
GB/T 4677.12-1988
|
Test method of interconnection resistance for printed boards
|
|
GB/T 4677.13-1988
|
Test method of change in resistance of plated-through holes-thermal cycling for printed boards
|
|
GB/T 4677.14-1988
|
Test method of steam/oxygen accelerated ageing of printed boards
|
|
GB/T 4677.15-1988
|
Test method for solvent and flux resistance of insulating coating on printed boards
|
|
GB/T 4677.16-1988
|
General examination method for printed boards
|
|
GB/T 4677.17-1988
|
Test method for insulation resistance within inner layers of multilayer printed boards
|
|
GB/T 4677.18-1988
|
Test method for insulation resistance between layers of multilayer printed boards
|
|
GB/T 4677.19-1988
|
Test methods for electrical integrity of printed boards
|
|
GB/T 4677.20-1988
|
Test method for plating adhesion of printed boards--Burnishing
|
|
GB/T 4677.21-1988
|
Test method for plating porosity of printed boards--the gas exposure method
|
|
GB/T 4677.2-1984
|
Micro-resistance test method of plating thickness of plated through holes for printed boards
|
|
GB/T 4677.22-1988
|
Test methods for surface ionic contamination of printed boards
|
|
GB/T 4677.23-1988
|
Test method for flammability of printed boards
|
|
GB/T 4677.3-1984
|
Test methods of pull strength for printed boards
|
|
GB/T 4677.4-1984
|
Test methods of peel strength for printed boards
|
|
GB/T 4677.5-1984
|
Test methods of platness for printed boards
|
|
GB/T 4677.6-1984
|
Test methods for thickness of metal and oxide coating by microscopical examination of cross-section
|
|
GB/T 4677.7-1984
|
Test methods of plating adhesion by adhesive type for printed boards
|
|
GB/T 4677.8-1984
|
Test methods of plating and coating thickness by beta backscattering for printed boards
|
|
GB/T 4677.9-1984
|
The electrographic test method of plating porosity for printed boards
|
|
GB/T 4677-2002
|
Test methods of printed boards
|
|
GB/T 4678.10-1984
|
Die-cast die components--Guide bushings for ejector plate
|
|
GB/T 4678.10-2003
|
Die-casting die components -- Part 10: Ejector guide hush
|
|
GB/T 4678.11-1984
|
Die-cast die components--Ejector pins
|
|
GB/T 4678.11-2003
|
Die-casting die components -- Part 11: Ejector pin
|
|
GB/T 4678.1-1984
|
Die-cast die components--Mold plates
|
|
GB/T 4678.1-2003
|
Die-casting die components -- Part 1: Mould plate
|
|
GB/T 4678.12-1984
|
Die-cast die components--Return pins
|
|
GB/T 4678.12-2003
|
Die-casting die components -- Part 12: Return pin
|
|
GB/T 4678.13-1984
|
Die-cast die components--Ejector plate washers
|
|
GB/T 4678.13-2003
|
Die-casting die component -- Part 13: Ejector plate washer
|
|
GB/T 4678.14-1984
|
Die-cast die components--Stop pins
|
|
GB/T 4678.14-2003
|
Die-casting die components -- Part 14: Stop pin
|
|
GB/T 4678.15-1984
|
Die-cast die components--Spacer blocks
|
|
GB/T 4678.15-2003
|
Die-casting die component -- Part 15: Spacer block
|
|
GB/T 4678.16-2003
|
Die-casting die components -- Part 16: Flat ejector pin
|
|
GB/T 4678.17-2003
|
Die-casting die components -- Part 17: Ejector sleeve
|
|
GB/T 4678.18-2003
|
Die-casting die components -- Part 18: Support pillar
|
|
GB/T 4678.19-2003
|
Die-casting die components -- Part 19: Locating element
|
|
GB/T 4678.2-1984
|
Die-cast die components--Round insert blocks
|
|
GB/T 4678.2-2003
|
Die-casting die components -- Part 2: Round insert block
|
|
GB/T 4678.3-1984
|
Die-cast die components--Rectangular insert blocks
|
|
GB/T 4678.3-2003
|
Die-casting die components -- Part 3: Rectangular insert block
|
|
GB/T 4678.4-1984
|
Die-cast die components--Guide pins type A
|
|
GB/T 4678.4-2003
|
Die-casting die components -- Part 4: Shouldered guide pillar
|
|
GB/T 4678.5-1984
|
Die-cast die components--Guide pins type B
|
|
GB/T 4678.5-2003
|
Die-casting die components -- Part 5: Headed guide pillar
|
|
GB/T 4678.6-1984
|
Die-cast die components--Guide bushings type A
|
|
GB/T 4678.6-2003
|
Die-casting die components -- Part 6: Headed guide bush
|
|
GB/T 4678.7-1984
|
Die-cast die components--Guide bushings type B
|
|
GB/T 4678.7-2003
|
Die-casting die components -- Part 7: Straight guide bush
|
|
GB/T 4678.8-1984
|
Die-cast die components--Ejector plates
|
|
GB/T 4678.8-2003
|
Die-casting die components -- Part 8: Ejector plate
|
|
GB/T 4678.9-1984
|
Die-cast die components--Guide pins for ejector plate
|
|
GB/T 4678.9-2003
|
Die-casting die components -- Part 9: Ejector guide pillar
|
|
GB/T 4679-1984
|
Specification for the die-cast die components
|
|
GB/T 4679-2003
|
Specification of die-casting die components
|
|
GB/T 4680-1984
|
Horizontal internal broaching machines--Testing of the accuracy
|
|
GB/T 4680-1997
|
Horizontal internal broaching machines. Testing of the accuracy
|
|
GB/T 4681-1984
|
External cylindrical centerless grinding machines--Testing of the accuracy
|
|
GB/T 4681-2007
|
External cylindrical centerless grinding machines -- Testing of the accuracy
|
|
GB/T 468-1982
|
Copper wire bars for electrical purposes
|
|
GB/T 468-1997
|
Copper wire bars for electrical purposes
|
|
GB/T 4682-1984
|
Internal cylindrical grinding machines with horizontal spindles--Testing of accuracy
|
|
GB/T 4682-2007
|
Internal cylindrical grinding machines with horizontal spindle -- Testing of the accuracy
|
|
GB/T 4683-1993
|
Turret lathes. Testing of the accuracy
|
|
GB/T 4684-1994
|
External cylindrical grinding machines--Parameters
|
|
GB/T 4685-1994
|
External cylindrical grinding machines--Accuracy
|
|
GB/T 4685-2007
|
External cylindrical grinding machines -- Testing of the Accuracy
|
|
GB/T 4686-1984
|
Gear shaping machines--Testing of the accuracy
|
|
GB/T 4686-2008
|
Gear shaping machines -- Testing of the accuracy
|
|
GB/T 4687-1984
|
Paper, board, pulp terms (1)
|
|
GB/T 4687-2007
|
Paper, board, pulps and related terms -- Vocabulary
|
|
GB/T 4688-1984
|
Determination of fiber constituent for paper and board
|
|
GB/T 4688-2002
|
Paper, board and pulps -- Analysis of fiber furnish
|
|
GB/T 4689.20-1996
|
Leather. Determination of adhesion of finish
|