|
Std ID |
Description (Standard Title) |
|
GB/T 4238-1992
|
Heat-resisting steel sheets and plates
|
|
GB/T 4238-2007
|
Heat-resisting steel plate, sheet and strip
|
|
GB/T 10699-2015
|
Calcium silicate thermal insulation
|
|
GB/T 4239-1991
|
Cold rolled stainless steel and heatresisting steel strips
|
|
GB/T 10700-1989
|
Test methods for elastic modulus of high performance ceramics
|
|
GB/T 10700-2006
|
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) -- Bending method
|
|
GB/T 4241-1984
|
Stainless steel wire rods for welding
|
|
GB/T 4241-2006
|
Stainless steel wire rods for welding
|
|
GB/T 424-1978
|
Test methods of wet breaking strength for printed and dyed fabrics
|
|
GB/T 4243-1984
|
Long fluted machine reamers with Morse taper shanks
|
|
GB/T 4243-2004
|
Long fluted machine reamers, Morse tape shanks
|
|
GB/T 4244-1984
|
Machine reamers with edge inclination with parallel shanks
|
|
GB/T 4244-2004
|
Machine reamers with edge inclination with parallel shanks
|
|
GB/T 4245-1984
|
Machine reamers--Technical requirements
|
|
GB/T 4245-2004
|
Technical conditions for machine reamers
|
|
GB/T 4246-1984
|
Special tolerance for reamers
|
|
GB/T 4246-2004
|
Special tolerances for reamers
|
|
GB/T 4247-1984
|
Machine bridge reamers with Morse taper shanks
|
|
GB/T 4247-2004
|
Machine bridge reamers with Morse taper shanks
|
|
GB/T 4248-1984
|
Hand taper 1: 50 reamers--Technical requirement
|
|
GB/T 4248-2004
|
Technical conditions for hand taper 1: 50 pin reamers
|
|
GB/T 4249-1996
|
Tolerancing principle
|
|
GB/T 4249-2009
|
Geometrical product specifications (GPS) -- Tolerancing principle
|
|
GB/T 4250-1984
|
Taper reamers--Technical requirements
|
|
GB/T 4250-2004
|
Taper reamers -- Technical requirements
|
|
GB/T 4251-1984
|
Machine reamers with parallel shanks with carbide tips
|
|
GB/T 4251-2003
|
Machine reamers with parallel shanks with carbide tips
|
|
GB/T 4251-2004
|
Machine reamers with parallel shanks with carbide tips
|
|
GB/T 4251-2008
|
Machine reamers with carbide tips
|
|
GB/T 425-1978
|
Test methods of weight for printed and dyed fabrics
|
|
GB/T 4252-1984
|
Machine reamers with Morse taper shanks with carbide tips
|
|
GB/T 4252-2004
|
Machine reamers with Morse taper shanks with carbide tips
|
|
GB/T 4253-1984
|
Reamers with carbide tips--Technical requirements
|
|
GB/T 4253-2004
|
Reamers with carbide tips -- Technical requirements
|
|
GB/T 4255-1984
|
Arbors for shell reamers and shell core drills
|
|
GB/T 4256-1984
|
Core drills with parallel shanks
|
|
GB/T 4256-2004
|
Core drills with parallel shanks and with Morse taper shanks
|
|
GB/T 4257-1984
|
Core drills--Technical requirements
|
|
GB/T 4257-2004
|
Core drills -- Technical requirements
|
|
GB/T 4258-1984
|
Countersinks with parallel shanks for angles 60 degree, 90 degree and 120 degree inclusive
|
|
GB/T 4258-2004
|
Parallel shanks countersinks for angles 60-degree, 90-degreeand 120-degreeinclusive
|
|
GB/T 4259-1984
|
Countersinks--Technical requirements
|
|
GB/T 4259-2004
|
Countersinks -- Technical requirements
|
|
GB/T 4260-1984
|
Counterbores with parallel shanks and solid pilots
|
|
GB/T 4260-2004
|
Counterbores with parallel shanks and solid pilots
|
|
GB/T 4261-1984
|
Counterbores with morse taper shanks and detachable pilots
|
|
GB/T 4261-2004
|
Counterbores with Morse taper shanks and detachable pilots
|
|
GB/T 426-1978
|
Test methods of shrinkage for printed and dyed fabrics
|
|
GB/T 4262-1984
|
Counterbores--Technical requirements
|
|
GB/T 4262-2004
|
Counterbores -- Technical requirement
|
|
GB/T 4263-1984
|
90 degree countersinks with parallel shanks and solid pilots
|
|
GB/T 4263-2004
|
Countersinks, 90-degree, with parallel shanks and solid pilots
|
|
GB/T 4264-1984
|
90 degree countersinks with morse taper shanks and detachable pilots
|
|
GB/T 4264-2004
|
Countersinks, 90-degree, with Morse taper shanks and detachable pilots
|
|
GB/T 4265-1984
|
90 degree countersinks--Technical requirements
|
|
GB/T 4265-2004
|
90-degreeCountersinks with pilots -- Technical requirements
|
|
GB/T 4266-1984
|
Detachable pilots for use with counterbores and countersinks
|
|
GB/T 4266-2004
|
Detachable pilots for use with counterbores and countersinks
|
|
GB/T 4267-1984
|
Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares
|
|
GB/T 4267-2004
|
Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares
|
|
GB/T 4268.1-1984
|
Graphical symbols for agricultural machinery
|
|
GB/T 4268.2-1987
|
Graphical symbols for agricultural machinery--Part 2
|
|
GB/T 4269.1-1984
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment--Symbols for operator controls and other displays--Common symbols
|
|
GB/T 4269.1-2000
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Part 1: Common symbols
|
|
GB/T 4269.2-1984
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment--Symbols for operator controls and other display--Symbols for agricultural tractors and machinery
|
|
GB/T 4269.2-2000
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Part 2: Symbols for agricultural tractors and machinery
|
|
GB/T 4269.2-2016
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 2: Symbols for agricultural tractors and machinery
|
|
GB/T 4269.3-2000
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Part 3: Symbols for powered lawn and garden equipment
|
|
GB/T 4269.4-2006
|
Forestry machinery -- Symbols for operator controls and other displays
|
|
GB/T 4269.4-2014
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery
|
|
GB/T 4269.5-2003
|
Portable forestry machinery -- Symbols for operator controls and other displays
|
|
GB/T 4270-1984
|
Graphical and letter symbols for thermal engineering
|
|
GB/T 4270-1999
|
Graphical symbols and letter codes for thermal engineering in the technical documentation
|
|
GB/T 4271-1984
|
Testing method for rating the thermal performance of flat plate solar collectors
|
|
GB/T 4271-2000
|
Test methods for the thermal performance of flat plate solar collectors
|
|
GB/T 4271-2007
|
Test methods for the thermal performance of solar collectors
|
|
GB/T 427-1978
|
Test methods of stitching strength for printed and dyed fabrics
|
|
GB/T 4272-1992
|
General principles for thermal insulation technique of equipments and pipes
|
|
GB/T 4272-2008
|
General principles for thermal insulation technique of equipment and pipes
|
|
GB/T 4273-1984
|
Glossary of integrated barge
|
|
GB/T 4273-2000
|
Terminology of integrated barge
|
|
GB/T 428-1978
|
Test methods of tearing strength for printed and dyed fabrics
|
|
GB/T 4288-1992
|
Household electric washing machines
|
|
GB/T 4288-2003
|
Household electric washing machine
|
|
GB/T 4288-2008
|
Household and similar electrical washing machine
|
|
GB/T 4289-1984
|
Safety requirements for household electric washing machines
|
|
GB/T 4290-1984
|
Codes of transportation status for freight containers
|
|
GB/T 4291-1984
|
Synthetic cryolite
|
|
GB/T 4291-1999
|
Synthetic cryolite
|
|
GB/T 4291-2007
|
Synthetic cryolite
|
|
GB/T 429-1978
|
Test methods of wrinkle recovery for printed and dyed fabrics
|
|
GB/T 4292-1984
|
Aluminum fluoride
|
|
GB/T 4292-1999
|
Aluminium fluoride
|
|
GB/T 4292-2007
|
Aluminium fluoride
|
|
GB/T 4293-1984
|
Sodium fluoride
|
|
GB/T 4294-1997
|
Aluminium hydroxide
|
|
GB/T 4294-2010
|
Aluminium hydroxide
|
|
GB/T 4295-1993
|
Tungsten carbide powder
|
|
GB/T 4295-2008
|
[Replaced by GB/T 4295-2019] Tungsten carbide powder
|
|
GB/T 4296-1984
|
Magnesium alloy wrought products--Microstructure--Inspection method
|