GB/T 10699-2015 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10699-2015: Calcium silicate thermal insulation Status: Valid GB/T 10699: Historical versions
Basic dataStandard ID: GB/T 10699-2015 (GB/T10699-2015)Description (Translated English): Calcium silicate thermal insulation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q25 Classification of International Standard: 91.120.10 Word Count Estimation: 8,810 Date of Issue: 2015-09-11 Date of Implementation: 2016-08-01 Older Standard (superseded by this standard): GB/T 10699-1998 Quoted Standard: GB/T 191; GB/T 4132; GB/T 5464; GB/T 5486-2008; GB 8624-2012; GB/T 10294; GB/T 10295; GB/T 10297; GB/T 10299; GB/T 14402; GB/T 17393; GB/T 30806; JH/T 206-2005; JC/T 618; GB/T 10296 Adopted Standard: ISO 8143-2010, NEQ Regulation (derived from): National Standard Announcement 2015 No.25 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the terms and definitions calcium silicate insulation products, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This Standard applies to hot surface temperature not higher than 1000 �� of various types of equipment, furnaces, pipelines and their accessories, calcium silicate insulation products. GB/T 10699-2015: Calcium silicate thermal insulation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Calcium silicate thermal insulation ICS 91.120.10 Q25 National Standards of People's Republic of China Replace GB/T 10699-1998 Calcium silicate insulation products Released on.2015-09-11 2016-08-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Issued by China National Standardization Administration Calcium silicate insulation products 1 ScopeThis standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of calcium silicate thermal insulation products. This standard applies to calcium silicate thermal insulation products for all types of equipment, kilns, pipes and their accessories whose hot surface temperature is not higher than 1000℃. Note. If calcium silicate insulation products are used below ambient temperature, special measures are recommended.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. GB/T 191 Packaging, Storage and Transportation Graphic Mark GB/T 4132 Thermal insulation materials and related terms GB/T 5464 Test method for non-combustibility of building materials GB/T 5486-2008 Test method for inorganic rigid thermal insulation products GB 8624-2012 Classification of burning performance of building materials and products GB/T 10294 Determination of steady-state thermal resistance and related characteristics of thermal insulation materials. Protective hot plate method GB/T 10295 Determination of steady-state thermal resistance and related characteristics of thermal insulation materials by calorimeter method GB/T 10296 Determination of the steady-state heat transfer characteristics of thermal insulation materials by the round tube method GB/T 10297 Determination of thermal conductivity of non-metallic solid materials Hot wire method GB/T 10299 Test method for hydrophobicity of thermal insulation materials GB/T 14402 Determination of combustion performance of building materials and products GB/T 17393 Specification for Thermal Insulation Materials for Covering Austenitic Stainless Steel GB/T 30806 Test method for dimensional stability of thermal insulation products for construction under specified temperature and humidity conditions HJ/T 206-2005 Technical requirements for environmental labeling products asbestos-free construction products JC/T 618 The chemical analysis method of soluble chloride, fluoride, silicate and sodium ion in thermal insulation material3 Terms and definitionsThe following terms and definitions defined in GB/T 4132 apply to this document. 3.1 Through crack Penetrate cracks in any direction (length, width or thickness) of the product.4 categories4.1 Variety 4.1.1 According to the highest use temperature of the material, it is divided into type I (650°C) and type II (1000°C). 4.1.2 According to the product density, Type I is divided into No. 240, No. 220 and No. 170, and Type II is divided into No. 270, No. 220, No. 170 and No. 150.user If special density products are needed, it can be executed according to the agreement between the supplier and the buyer. 4.2 Shape According to the shape of the product, it is divided into flat plate, curved plate and tube shell. 4.3 Product marking The order in the mark is product name, variety, shape, length×width (inner diameter)×thickness, number of this standard. The highest operating temperature is represented by I and II, and the flat plate, tube shell, and curved plate are represented by P, G and H respectively. Example. The plate with a length of 600mm, a width of 300mm, and a thickness of 60mm with a maximum operating temperature of 1000℃ is marked as.5 requirements5.1 Appearance quality 5.1.1 Appearance defects 5.1.1.1 There shall be no missing edges with a length exceeding 30mm and a depth exceeding 10mm, and there shall be no edges exceeding 20mm in length and a depth exceeding 10mm. 10mm missing corner. 5.1.1.2 Edge damage with a depth of not more than 3mm and corner damage with a depth of not more than 4mm are not counted as appearance defects. 5.1.1.3 The total number of defects between the sizes specified in 5.1.1.1 and 5.1.1.2 shall not exceed 4, and the missing corners shall not exceed 2. 5.1.1.4 There should be no through cracks. 5.1.2 Thickness uniformity The deviation between the local thickness and the average thickness of the product at any measurement position shall not exceed 3mm. 5.1.3 Verticality deviation 5.1.3.1 The deviation of verticality in the length and width directions of plate products shall not be greater than 6mm/m, and the deviation of verticality in the thickness direction shall not 2mm/m. 5.1.3.2 The deviation of the verticality of the ends of the tube and shell products shall not exceed 3mm/m. 5.1.4 Bend 5.1.4.1 The bending of flat products should not exceed 0.5% of the length (or width) or 3mm, whichever is greater. 5.1.4.2 The longitudinal bending of arc-shaped plates and shell products should not exceed 0.5% of the product length or 3mm, whichever is greater. 5.2 Size tolerance Based on the marked nominal size, the allowable deviation of the product size should meet the requirements of Table 1. 5.4 Combustion performance Calcium silicate itself is a non-flammable material. Products that use organic fibers as reinforcing materials should have a combustion performance classification of GB 8624- 2012A (A1) level requirements. 5.5 Dissolvable ion content, pH value and corrosivity of the leaching solution Most calcium silicate insulation products contain trace amounts of water-soluble chloride and other halides and sodium ions. When used in austenitic stainless steel, should Meet the requirements of GB/T 17393.When requested by the user, the test data of the soluble ion content and the pH value of the extract should be provided. 5.6 Hydrophobicity When there is a hydrophobic requirement, its hydrophobicity should be greater than 98%, and other physical performance indicators should still meet the requirements of Table 2. 5.7 Asbestos content It should not contain asbestos.6 Test method6.1 Appearance quality According to the provisions of Chapter 5 of GB/T 5486-2008.Thickness uniformity is the thickness of the same specimen at any measurement position minus the flatness The difference in average thickness. 6.2 Allowable deviation of size According to the provisions of Chapter 4 of GB/T 5486-2008.The dimensional deviation is the arithmetic mean of the dimensions of the same specimen measured in the same direction Subtract the difference of its nominal size. 6.3 Density and mass moisture content According to the provisions of Chapter 8 of GB/T 5486-2008. 6.4 Dimensional stability According to the provisions of GB/T 30806.Test environment conditions. temperature (23±2)℃, relative humidity (90±5)%, test duration 48h. 6.5 Even temperature burning performance According to the provisions of Chapter 10 of GB/T 5486-2008, the burning temperature is 650℃ for type I, 1000℃ for type II, and the constant temperature time is 16h. 6.6 Thermal conductivity According to the regulations of GB/T 10294, GB/T 10295, and GB/T 10296, the thermal conductivity above 300℃ can be in accordance with the regulations of GB/T 10297 set. GB/T 10294 is the arbitration method. 6.7 Compressive strength According to the provisions of Chapter 6 of GB/T 5486-2008. 6.8 Flexural strength According to the provisions of Chapter 7 of GB/T 5486-2008. 6.9 Combustion performance According to the provisions of GB/T 5464 and GB/T 14402. 6.10 Dissolvable ion content, pH value and corrosiveness of leaching solution The content of soluble ions is in accordance with the provisions of JC/T 618, and the pH value and corrosiveness of the leaching solution are in accordance with the provisions of GB/T 17393. 6.11 Hydrophobicity According to the provisions of GB/T 10299. 6.12 Asbestos content According to HJ/T 206-2005 Appendix A.7 Inspection rules7.1 Inspection classification 7.1.1 Factory inspection The factory inspection items include. appearance quality, size tolerance, density, mass moisture content and compressive strength. 7.1.2 Type inspection Type inspection items are all items specified in Chapter 5.Type inspection should be carried out in one of the following situations. a) When a new product or an old product is transferred to a factory for trial-making type appraisal; b) After the formal production, there are major changes in raw materials and processes, which may affect product performance; c) During normal production, at least once a year; d) When production resumes 6 months after the product has been discontinued; e) When there is a big difference between the routine inspection result and the last type inspection. 7.2 Batching and sampling 7.2.1 Batch The same raw material, formula, and the same production process are used to produce the same variety of products as a batch, and the production time limit for the same batch of inspected products should not exceed one week. 7.2.2 Sampling 7.2.2.1 Extraction of samples Random samples should be taken from qualified products. Appearance quality and size allowable deviation inspection shall determine the sample size according to Table 3.Batches and samples in Table 3 This quantity refers to the number of plates or blocks or the number of entire sections of the tube and shell. The samples for physical performance inspection shall be selected according to the inspection items from the samples that have passed the appearance quality inspection. The number of samples specified in the target method standard is randomly selected. 7.2.2.2 Sampling plan See Table 3 for the secondary sampling plan. 7.3 Judgment rules 7.3.1 Appearance quality and size allowable deviation are determined according to Table 3. 7.3.2 When the inspection results of all inspection items meet the requirements of Chapter 5, the batch of products is judged to be qualified; otherwise, the batch of products is judged to be unqualified. 8 Marking, packaging, transportation and storage 8.1 Logo The ex-factory products should have a quality certificate, and the nominal value should be clearly indicated. Each packaging box should be marked with the product mark, quantity, name of the manufacturer, and location. Address and date of production. 8.2 Packaging The product should be packed in a box, and measures should be taken to prevent moisture and loosening. The packing box should be marked "No rollover" according to GB/T 191 "Fear of rain" sign. 8.3 Transportation It should be protected from moisture during transportation and handled with care during loading and unloading. 8.4 Storage Products should be stacked indoors by variety. The stacking site should be solid, dry and level. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10699-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 10699-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10699-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10699-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10699-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10699-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
