|
Std ID |
Description (Standard Title) |
|
GB/T 11986-1989
|
Surface active agents. Powders and granules. Mesurement of the angle of repose
|
|
GB/T 11987-1989
|
Surface active agent. Technical alkane sulphonates. Determination of total alkane sulphonates content
|
|
GB/T 11988-1989
|
Surface active agent--Technical alkane sulfonates--Determination of mean relative molecular mass and content of alkane monosulfonates
|
|
GB/T 11988-2008
|
Surface active agents -- Technical alkane sulfonates -- Determination of mean relative molecular mass and content of the alkane monosulfonate
|
|
GB/T 11989-1989
|
Anionic surface active agents--Determination of soluble matter content in light petroleum
|
|
GB/T 11989-2008
|
Anionic surface active agents -- Determination of soluble matter content in light petroleum
|
|
GB/T 11991-1989
|
Ion exchange resins--Determination for swelling upon complete conversion
|
|
GB/T 11991-2008
|
Determination of reversible swelling of exchange resins
|
|
GB/T 11992-1989
|
Strong basic anion exchange resins in chloride form--Determination of exchange capacity
|
|
GB/T 11992-2008
|
Determination of exchange capacity of strong basic anion exchange resins in chloride form
|
|
GB/T 11996-1989
|
Plastics--Melamine-formaldehyde mouldings--Determination of extractable formaldehyde
|
|
GB/T 11997-1989
|
Plastics--Preparation and use of multipurpose test specimens
|
|
GB/T 11997-2008
|
Plastic -- Multipurpose test specimens
|
|
GB/T 11998-1989
|
Determination of glass transition temperature of plastics. Thermomechanical analysis
|
|
GB/T 11999-1989
|
Plastics-Film and sheeting--Determination of tear resistance--Elmendorf method
|
|
GB/T 120.1-2000
|
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
|
|
GB/T 120.2-2000
|
Parallel pins with internal thread, of hardened steel and martensitic stainless steel
|
|
GB/T 12000-1989
|
Plastics--Test methods of exposure to damp heat, steady state
|
|
GB/T 12000-2003
|
Determination of the effects of exposure to damp heat, water spray and salt mist for plastics
|
|
GB/T 12001.1-1989
|
Moulding materials for windows of unplasticized polyvinyl chloride--Part 1: Designation
|
|
GB/T 12001.1-2008
|
Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 1: Designation system and basis for specifications
|
|
GB/T 12001.2-1989
|
Moulding materials for windows of unplasticized polyvinyl chloride--Part 2: Quality specification
|
|
GB/T 12001.2-2008
|
Plastics -- Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials -- Part 2: Preparation of test specimens and determination of properties
|
|
GB/T 12001.3-1989
|
Moulding materials for windows of unplasticized polyvinyl chloride--Part 3: Determination of properties
|
|
GB/T 12002-1989
|
Sealing strips for plastic doors and windows
|
|
GB/T 12003-1989
|
Allowable tolerances for basic dimensions of plastic windows
|
|
GB/T 12003-2008
|
Unplasticized polyvinyl chloride (PVC-U) windows -- Determination of dimensions
|
|
GB/T 12004.1-1989
|
Determination of impurities particles number in polyvinyl chloride paste resins
|
|
GB/T 12004.2-1996
|
PVC paste resins--Preparation of a paste
|
|
GB/T 12004.3-1989
|
Determination for apparent viscosity of polyvinyl chloride paste
|
|
GB/T 12004.4-1989
|
Polyvinyl chloride plastisols--Determination for Brookfield viscosity
|
|
GB/T 12004.4-2003
|
Polyvinyl chloride paste -- Determination of apparent viscosity by the Brookfield test method
|
|
GB/T 12004.5-1992
|
Polyvinyl chloride plastsols. Determination of fineness of grind
|
|
GB/T 12005.10-1992
|
Determination for molecular weight of polyacrylamide by viscometry
|
|
GB/T 12005.1-1989
|
Determination for limiting viscosity number of polyacrylamide
|
|
GB/T 12005.2-1989
|
Determination for solid content of polyacrylamide
|
|
GB/T 12005.3-1989
|
Determination for residual acrylamide of polyacrylamide--Bromating method
|
|
GB/T 12005.4-1989
|
Determination for residual acrylamide of polyacrylamide--Liquid chromatography
|
|
GB/T 12005.5-1989
|
Determination for residual acrylamide content of polyacrylamide--Gas chromatograghy
|
|
GB/T 12005.6-1989
|
Determination for hydrolysis degree of partly hydrolysis polyacrylamide
|
|
GB/T 12005.7-1989
|
Determination for particle size of pow der polyacrylamide
|
|
GB/T 12005.8-1989
|
Determination for dissolving velocity of powder polyacrylamide
|
|
GB/T 12005.9-1992
|
Designation of polyacrylamide
|
|
GB/T 12006.1-1989
|
Polyamides--Determination of viscosity number
|
|
GB/T 12006.1-2009
|
Plastics -- Polyamides -- Part 1: Determination of viscosity number
|
|
GB/T 12006.2-1989
|
Polyamides--Determination of water content
|
|
GB/T 12006.2-2009
|
Plastic polyamide -- Part 2: Determination of moisture
|
|
GB/T 12006.3-1989
|
Polyamides--Determination of ash
|
|
GB/T 12006.4-1989
|
Polyamide homopolymers. Determination of matter extractable by boiling methanol
|
|
GB/T 12007.1-1989
|
Epoxide resins--Determination of color--Gardner color scale
|
|
GB/T 12007.2-1989
|
Epoxide resins. Determination of sodium ion
|
|
GB/T 12007.3-1989
|
Epoxide resins. Determination of total chlorine content
|
|
GB/T 12007.4-1989
|
Epoxide resins--Determination of viscosity
|
|
GB/T 12007.5-1989
|
Epoxide resins--Determination of density--Pyknometer method
|
|
GB/T 12007.6-1989
|
Epoxide resins. Determination of softening point. Ring and ball method
|
|
GB/T 12007.7-1989
|
Determination of gelation time of epoxide resins
|
|
GB/T 12008.1-1989
|
Polyether polyols--Designation
|
|
GB/T 12008.1-2009
|
Plastics -- Polyether polyols -- Part 1: Designation system
|
|
GB/T 12008.2-1989
|
Polyether polyols--Specification
|
|
GB/T 12008.2-2010
|
Plastics - Polyether polyols - Part 2: Specification
|
|
GB/T 12008.3-1989
|
Palyether polyols--Determination of hydroxyl number
|
|
GB/T 12008.3-2009
|
Plastics -- Polyether polyols -- Part 3: Determination of hydroxyl number
|
|
GB/T 12008.4-1989
|
Polyether polyols--Determination of sodium and potassium
|
|
GB/T 12008.4-2009
|
Plastics -- Polyether polyols -- Part 4: Determination of sodium and potassium
|
|
GB/T 12008.5-1989
|
Polyether polyols--Determination of acid number
|
|
GB/T 12008.5-2010
|
Plastics -- Polyether polyols -- Part 5: Determination of acidity as acid number
|
|
GB/T 12008.6-1989
|
Polyether polyols--Determination of water content
|
|
GB/T 12008.6-2010
|
Plastics -- Polyether polyols -- Part 6: Determination of degree of unsaturation
|
|
GB/T 12008.7-1992
|
Polyether polyols--Determination of unsaturation
|
|
GB/T 12008.7-2010
|
Plastics -- Polyether polyols -- Part 7: Determination of viscosity
|
|
GB/T 12008.8-1992
|
Polyether polyols--Determination of viscosity
|
|
GB/T 12009.1-1989
|
Isocyanates. Determination of total chlorine content
|
|
GB/T 12009.2-1989
|
Isocyanates. Determination of hydrolyzable chlorine content
|
|
GB/T 12009.2-2016
|
Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Part 2: Determination of hydrolysable chlorine
|
|
GB/T 12009.3-1989
|
Polymethylene polyphenyl isocyanate--Determination of viscosity
|
|
GB/T 12009.3-2009
|
Plastics -- Polyethylene polyphenol isocyanate -- Part 3: Determination of viscosity
|
|
GB/T 12009.4-1989
|
Polymethylene polyphenyl isocyanato. Determination of isocyanate content
|
|
GB/T 12009.4-2016
|
[Including 2019XG1] Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Part 4: Determination of isocyanate content
|
|
GB/T 12009.5-1992
|
Isocyanates. Determination of acidity
|
|
GB/T 12009.5-2016
|
[Including 2019XG1] Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Part 5: Determination of acidity
|
|
GB/T 12010.10-1989
|
Determination for particle size of polyvinyl alcohol resins
|
|
GB/T 12010.11-1989
|
Determination for sodium hydroxide contents of polyvinyl alcohol resins
|
|
GB/T 12010.1-1989
|
Polyvinyl alcohol resins--Designation
|
|
GB/T 12010.1-2008
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
|
|
GB/T 12010.12-1989
|
Determination for transparency of polyvinyl alcohol resins
|
|
GB/T 12010.2-1989
|
Polyvinyl alcohol resins--Specification
|
|
GB/T 12010.2-2010
|
Plastic -- Poly (vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties
|
|
GB/T 12010.3-1989
|
Determination for viscocity of polyvinyl alcohol resins
|
|
GB/T 12010.3-2010
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 3: Specification
|
|
GB/T 12010.4-1989
|
Determination for volatile matter of polyvinyl alcohol resins
|
|
GB/T 12010.4-2010
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 4: Determination for pH value
|
|
GB/T 12010.5-1989
|
Determination for residual acetic radical contents (or alcoholysis) of polyvinyl alcohol resins
|
|
GB/T 12010.5-2010
|
Plastic -- Poly (vinyl alcohol) (PVAL) materials -- Part 5: Determination for average polymerization degree
|
|
GB/T 12010.6-1989
|
Determination for sodium acetate contents of polyvinyl alcohol resins
|
|
GB/T 12010.6-2010
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 6: Determination for particle size
|
|
GB/T 12010.7-1989
|
Determination for ash content of polyvinyl alcohol resins
|
|
GB/T 12010.7-2010
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 7: Determination for sodium hydroxide contents
|
|
GB/T 12010.8-1989
|
Determination for pH of polyvinyl alcohol resins
|
|
GB/T 12010.8-2010
|
Plastic -- Polyvinyl alcohol (PVAL) materials -- Part 8: Determination for transparency
|
|
GB/T 12010.9-1989
|
Determination for average polymerization degree of polyvinyl alcohol resins
|