|
Std ID |
Description (Standard Title) |
|
GB/T 11367-1989
|
Methods for the calculation of scuffing load capacity for bevel gears
|
|
GB/T 11369-1989
|
Light weight gas turbine exhaust smoke measurement
|
|
GB/T 11369-2008
|
Measurement of exhaust gas emission for aero-derivative gas turbine
|
|
GB/T 11370-1989
|
Gas emissions measurement of light weight gas turbines
|
|
GB/T 11371-1989
|
Light weight gas turbine operation and maintenance
|
|
GB/T 11371-2008
|
Operation and maintenance for gas turbine
|
|
GB/T 11372-1989
|
Rust prevention terminology
|
|
GB/T 11373-1989
|
The general principle of surface preparation of metallic substrate for thermal spraying
|
|
GB/T 11374-1989
|
Thermal spraying coating--Nondestructive methods for measurement of thickness
|
|
GB/T 11374-2012
|
Thermal spraying coating -- Nondestructive methods for measurement of thickness
|
|
GB/T 11376-1989
|
Phosphate conversion coatings for metals
|
|
GB/T 100-1986
|
Slotted countersink head wood screws
|
|
GB/T 11377-1989
|
Metallic and other non-organic coatings--General rules for corrosion tests applicable for storage conditions
|
|
GB/T 11377-2005
|
Metallic and other inorganic coatings -- General rules for corrosion tests applicable for storage conditions
|
|
GB/T 11378-1989
|
Metallic coatings--Measurement of coating thickness--Profilometric method
|
|
GB/T 11378-2005
|
Metallic coatings -- Measurement of costing thickness -- Profilometric method
|
|
GB/T 11379-1989
|
Metallic coatings--Electroplated coatings of chromium for engineering purposes
|
|
GB/T 11379-2008
|
Metallic coatings -- Electroplated coatings of chromium for engineering purposes
|
|
GB/T 11380-1989
|
Technical requirement for bus body coating
|
|
GB/T 11381-1989
|
Method of static load test for bus top
|
|
GB/T 11382-1989
|
Effect test procedure of front bumper for bus--Head-on collision with fixed wall
|
|
GB/T 11383-1989
|
Information processin. 8-bit code for information interchange. Structure and rules for implementation
|
|
GB/T 11384-1989
|
Information processing--Data interchange on 200mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, 1. 9 tpmm, on both sides--Part 1: Dimensional, physical and magnetic characteri
|
|
GB/T 11385-1989
|
Information precessing--Data interchange on 200mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, 1. 9 tpmm, on both sides--Part 2: Track format
|
|
GB/T 11386-1989
|
Information processing--Unrecorded, hard-sectored 130 mm flexible disk cartridges one or two-sided use--Dimensional physical and magnetic characteristics
|
|
GB/T 11387-1989
|
Testing methods for static flexural strength of piezoelectric ceramics
|
|
GB/T 11387-2008
|
Test methods for the properties of piezoelectric ceramics -- Test for the static flexural strength
|
|
GB/T 1139-1984
|
Morse and metric taper reamers with parallel shanks
|
|
GB/T 1139-2004
|
Morse and metric taper reamers
|
|
GB/T 1140-1984
|
Morse and metric taper reamers with Morse taper shanks
|
|
GB/T 11405-1989
|
Dibutylphthalate for industrial use
|
|
GB/T 11405-2006
|
Dibutyl phthalate for industrial use
|
|
GB/T 11406-1989
|
Di- (2-ethylhexyl) phthalate for industrial use
|
|
GB/T 11406-2001
|
Di-(2-ethylhexyl) phthalate for industrial use
|
|
GB/T 11359-1989
|
Flat belt drive--Belt and pulleys-widths
|
|
GB/T 11360-1989
|
Flat belt drive--Pulleys-crowns
|
|
GB/T 11361-1989
|
Synchronous belt drives--Pulleys
|
|
GB/T 11361-2008
|
Synchronous belt drives -- Trapezoidal toothed pulleys
|
|
GB/T 11362-1989
|
Synchronous belt drives--Calculation of power rating and drive centre distance
|
|
GB/T 11362-2008
|
Synchronous belt drives -- Calculation of power rating and drive center distance
|
|
GB/T 11363-1989
|
Methods of the strength tests for brazed and soldered joint
|
|
GB/T 11026.2-2000
|
To determine the heat resistance of electrical insulating materials Guide Part 2: the selection of the test criteria
|
|
GB/T 11364-1989
|
Test method of spreadability and clearance filling ability for filler metal
|
|
GB/T 11364-2008
|
Test method of wettability for brazing filler metals
|
|
GB/T 11365-1989
|
Accuracy of bevel and hypoid gears
|
|
GB/T 11366-1989
|
Basic terminology of planetary drives
|
|
GB/T 11407-1989
|
Vulcanizing accelerator M
|
|
GB/T 11407-2003
|
Vulcanizing accelerator M
|
|
GB/T 11407-2013
|
Vulcanizing accelerator 2 -- Mercaptobenzothiazole (MBT)
|
|
GB/T 11408-1989
|
Vulcanizing accelerator DM
|
|
GB/T 11408-2003
|
Vulcanizing accelerator DM
|
|
GB/T 11408-2013
|
Vulcanizing accelerator -- Dibenzothiazole disulfide (MBTS)
|
|
GB/T 11409.1-1995
|
Test method of fusion point for rubber antiagers and vulcanizing accelerators
|
|
GB/T 11409.2-1995
|
Test method of crystallizing point for rubber antiagers and vulcanizing accelerators
|
|
GB/T 11409.3-1989
|
Test method of softening point for rubber antiager and vulcanizing accelerators
|
|
GB/T 11409.3-2003
|
Test method of softening point for rubber anti-ageing and vulcanizing accelerators
|
|
GB/T 11409.4-1989
|
Test method of weight loss on heating for rubber antiager and vulcanizing accelerators
|
|
GB/T 11409.5-1989
|
Test method of residue on sieve for rubber anriager and vulcanizing accelerators
|
|
GB/T 11409.6-1989
|
Test method of apparent density for rubber antiager and vulcanizing accderators
|
|
GB/T 11409.6-2003
|
Test method of apparent density for rubber anti-ageing and vulcanizing accelerators
|
|
GB/T 11409.7-1989
|
Test method of ash for rubber antiager and vulcanizing accelerators
|
|
GB/T 11409.8-1989
|
Test method of viscosity for rubber antiager and vulcanizing accelerators--Rotational viscometer method
|
|
GB/T 11409.9-1989
|
Test method of insoluble matter in hydrochloric acid for rubber antiager and vuclcanizing accelerators
|
|
GB/T 11409.9-2003
|
Test method of insoluble matter in hydrochloric acid for rubber anti-ageing and vulcanizing accelerators
|
|
GB/T 11409-2008
|
Test methods rubber anti-agers and vulcanizing accelerators
|
|
GB/T 1141-1984
|
Core drills with Morse taper shanks
|
|
GB/T 11412.1-1989
|
Technical requirements for safety of commencing a sea voyage of sea going transport ships--General rules
|
|
GB/T 11412.1-2009
|
Technical requirement for safety departure of sea going ship -- Part 1: General requirement
|
|
GB/T 11412.2-1989
|
Technical requirements for safety of commencing a sea voyage of sea going transport ships--Deck department
|
|
GB/T 11412.3-1989
|
Technical requirements for safety of commencing a sea voyage of sea going transport ships--Engineering department
|
|
GB/T 11413-1989
|
Test method for bond strength of leather shoe heels
|
|
GB/T 11413-2005
|
Test methods for bond strength of leather shoes heels
|
|
GB/T 10020-1988
|
Adding machines. Layout of function keyboard
|
|
GB/T 11414-1989
|
Laboratory glassware--Bottles
|
|
GB/T 11414-2007
|
Laboratory glassware -- Bottles
|
|
GB/T 11415-1989
|
Laboratory sintered(fritted) filters. Porosity grading, classification and designation
|
|
GB/T 11416-1989
|
Domestic insulated containers
|
|
GB/T 11416-2002
|
Domestic insulated containers
|
|
GB/T 11417.1-2012
|
Ophthalmic optics -- Contact lenses -- Part 1: Vocabulary, classification system and recommendations for labeling specifications
|
|
GB/T 11417.4-2012
|
Ophthalmic optics -- Contact lenses -- Part 4: Saline solution for contact lens testing
|
|
GB/T 11417.5-2012
|
[Including 2022XG1] Ophthalmic optics -- Contact lenses -- Part 5: Testing methods for optical properties
|
|
GB/T 11417.6-2012
|
Ophthalmic optics - Contact lenses - Part 6: Mechanical properties test methods
|
|
GB/T 11417.7-2012
|
[Including 2022XG1] Ophthalmic optics -- Contact lenses -- Part 7: Physicochemical properties test methods
|
|
GB/T 11417.8-2012
|
Ophthalmic optics -- Contact lenses -- Part 8: Determination of shelf-life
|
|
GB/T 11417.9-2012
|
Ophthalmic optics -- Contact lenses -- Part 9: Ageing by exposure to UV and visible radiation (in vitro method)
|
|
GB/T 11418-1989
|
Determination of resistance to heat of vitreous and porcelain enamels
|
|
GB/T 11419-1989
|
Determination of resistance to thermal shock of vitreous and porcelain enamels
|
|
GB/T 11419-2008
|
Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock
|
|
GB/T 11420-1989
|
Measurement of specular gloss of vitreous and porcelain enamels
|
|
GB/T 1142-1984
|
Shell drills
|
|
GB/T 1142-2004
|
Shell drill
|
|
GB/T 11423-1989
|
Packaging of corrugated box for domestic ceramics
|
|
GB/T 11424-1989
|
Oil of litsea cubeba [Litsea cubeba (Lour.)pers. ]
|
|
GB/T 11424-2008
|
Oil of Litsea cubeba
|
|
GB/T 11425-1989
|
Oil of cassia (Cinnamomum cassia nees)
|
|
GB/T 11425-2008
|
Oil of cassia, China
|
|
GB/T 1143-1984
|
Countersinks with Morse taper shanks for angles 60, 90 and 120 degree inclusive
|
|
GB/T 1143-2004
|
Morse taper shank countersinks for angles 60-degreeand 90-degree, 120-degreeinclusive
|
|
GB/T 11433-1989
|
Dimensions of tubes, pins and rods of ferromagnetic oxides
|
|
GB/T 11434-1989
|
Chemical analysis methods of raw materials used in ferrite materials
|