|
Std ID |
Description (Standard Title) |
|
GB/T 34564.1-2017
|
Cold-word mould steel -- Part 1: High toughness and wear-resistance steels
|
|
GB/T 34566-2017
|
Hot stamping steel sheet and strip for automobile
|
|
GB/T 34584-2017
|
Safety technical regulations for hydrogen refuelling station
|
|
GB/T 34585-2017
|
Battery electric goods vehicles -- Specifications
|
|
GB/T 34589-2017
|
Road vehicles -- Diagnostic connector
|
|
GB/T 34590.7-2017
|
Road vehicles -- Functional safety -- Part 7: Production and operation
|
|
GB/T 34592-2017
|
Steering force steering angle detector for steering wheel of automobile
|
|
GB/T 34593-2017
|
Test methods of hydrogen emission for fuel cell engine
|
|
GB/T 34595-2017
|
The technical specifications for remanufacturing of automotive components -- Water pump
|
|
GB/T 34596-2017
|
The technical specification for remanufacturing of automotive components -- Oil pumps
|
|
GB/T 34598-2017
|
Plug-in hybrid electric commercial vehicles -- Specifications
|
|
GB/T 34600-2017
|
The technical specification for remanufacturing of automotive components -- Spark and compression ignition engines
|
|
GB/T 34657.1-2017
|
Interoperability test specifications of electric vehicle conductive charging -- Part 1: Supply equipment
|
|
GB/T 34657.2-2017
|
Interoperability test specifications of electric vehicle conductive charging -- Part 2: Vehicle
|
|
GB/T 34658-2017
|
Conformance test for communication protocols between off-board conductive charger and battery management system for electric vehicle
|
|
GB/T 34667-2017
|
General specifications of electrical self-balancing vehicles
|
|
GB/T 34668-2017
|
Safety requirements and test methods for electrical self-balancing vehicles
|
|
GB/T 5591.1-2017
|
Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
|
|
GB/T 702-2017
|
Hot-rolled steel bars -- Dimensions, shape, weight and tolerances
|
|
GB/T 9252-2017
|
Method for pressure cycling test of gas cylinders
|
|
GB/T 10414-2017
|
Synchronous belt drives -- Automotive synchronous pulleys
|
|
GB/T 10574.11-2017
|
Methods for chemical analysis of tin-lead solders -- Part 11: Determination of phosphorus content -- Crystal violet phosphorus-vanadium-molybdenum heteropoly acid spectrophotometry
|
|
GB/T 12000-2017
|
Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist
|
|
GB/T 12665-2017
|
Requirements of damp-heat testing of electrical machine for service in general environmental condition
|
|
GB/T 156-2017
|
Standard voltages
|
|
GB/T 18363-2017
|
Filling receptacle of CNG vehicle
|
|
GB/T 18364-2017
|
Filling receptacle of LPG vehicle
|
|
GB/T 18487.2-2017
|
Electric vehicle conductive charging system -- Part 2: EMC requirements for off-board electric vehicle supply equipment
|
|
GB/T 18881-2017
|
Catalyst for light-duty petrol vehicle exhaust purification
|
|
GB/T 19345.1-2017
|
Amorphous and nanocrystalline alloys -- Part 1: Fe-based amorphous soft magnetic alloy strips
|
|
GB/T 2100-2017
|
Corrosion-resistant steel castings for general applications
|
|
GB/T 290-2017
|
Rolling bearings -- Needle roller bearings with drawn cup and without inner ring -- Boundary dimensions
|
|
GB/T 304.1-2017
|
Spherical plain bearings -- Classification
|
|
GB/T 342-2017
|
Dimension, shape, mass and tolerance of cold-drawn round, square and hexagonal steel wires
|
|
GB/T 34676-2017
|
Interior wall coatings for children room decorating
|
|
GB/T 35178-2017
|
Fuel cell electric vehicles -- Hydrogen consumption -- Test methods
|
|
GB/T 35179-2017
|
Bench test methods for safe ride performance of in-use electric vehicles
|
|
GB/T 35788-2017
|
Security technical requirement for the electronic identification of motor vehicles
|
|
GB/T 4094.2-2017
|
Electric vehicles -- Symbols for controls, indicators and tell-tales
|
|
GB/T 4437.2-2017
|
Aluminium and aluminium alloy extruded tubes -- Part 2: Seam tubes
|
|
GB/T 6653-2017
|
Steel plates and strips for welded gas cylinders
|
|
GB/T 11060.4-2017
|
Natural gas -- Determination of sulfur compound -- Part 4: Determination of total sulfur content by oxidative micro-coulometry method
|
|
GB/T 1499.1-2017
|
Steel for the reinforcement of concrete -- Part 1: Hot rolled plain bars
|
|
GB/T 1796.3-2017
|
Tyre valves -- Part 3: Snap-in valves
|
|
GB/T 200-2017
|
Moderate-heat Portland cement, low-heat Portland cement
|
|
GB/T 21980-2017
|
General technical specification for sportswear and protecting suits
|
|
GB/T 22794-2017
|
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
|
|
GB/T 35349-2017
|
Parking brake performance test methods for vehicles
|
|
GB/T 35369-2017
|
Passenger detection device for vehicle seat belt reminder
|
|
GB/T 35751-2017
|
Nonwovens and composite nonwovens for automotive interior
|
|
GB/T 35785-2017
|
Specification for the installation of read-write equipment of the electronic identification of motor vehicles
|
|
GB/T 35790.1-2017
|
Specification for installation of the electronic identification of motor vehicles -- Part 1: Automobile
|
|
GB/T 3903.2-2017
|
Footwear -- Test methods for whole shoe -- Abrasion resistance
|
|
GB/T 3903.4-2017
|
Footwear -- Test methods for whole shoe -- Hardness
|
|
GB/T 5169.16-2017
|
Fire hazard testing for electric and electronic products -- Part 16: Test flames--50 W horizontal and vertical flame test methods
|
|
GB/T 6503-2017
|
Man-made fibres -- Test method of moisture regain
|
|
GB/T 6504-2017
|
Man-made fiber -- Test method for oil content
|
|
GB/T 6506-2017
|
Synthetic fibre -- Test method for crimp contraction properties of textured filament yarns
|
|
GB/T 13869-2017
|
General guide for safety of electric user
|
|
GB/T 35641-2017
|
Basic requirements for engineering surveying and mapping
|
|
GB/T 536-2017
|
Liquefied anhydrous ammonia
|
|
GB/T 11951-2018
|
Natural fibres -- Terminology
|
|
GB/T 317-2018
|
White granulated sugar
|
|
GB/T 35892-2018
|
Laboratory animal -- Guideline for ethical review of animal welfare
|
|
GB/T 13531.6-2018
|
General methods on determination of cosmetics -- Determination of particle size
|
|
GB/T 13531.7-2018
|
General methods on determination of cosmetics -- Determination of refractive index
|
|
GB/T 1499.2-2018
|
Steel for the reinforcement of concrete -- Part 2: Hot rolled ribbed bars
|
|
GB/T 1572-2018
|
Determination of clinkering property of coal
|
|
GB/T 1573-2018
|
Determination of thermal stability of coal
|
|
GB/T 1575-2018
|
Determination of yield of benzene-soluble extract in brown coals
|
|
GB/T 220-2018
|
Determination of carboxy reactivity of coal
|
|
GB/T 35840.1-2018
|
Steels for plastic mould -- Part 1: Non-alloy steels
|
|
GB/T 35841-2018
|
High strength steel plate for dump truck structure
|
|
GB/T 35929-2018
|
Packaging -- Tactile warnings of danger -- Requirements
|
|
GB/T 18253-2018
|
Steel and steel products -- Types of inspection documents
|
|
GB/T 36023-2018
|
Guides for energy efficiency assessment of prepainting process
|
|
GB/T 36025-2018
|
Guides for energy efficiency assessment of continuous galvanizing process
|
|
GB/T 36102-2018
|
Tin-coated copper-clad steel wire for electronic products
|
|
GB/T 36108-2018
|
CAD software technical requirements of fixed dental restoration
|
|
GB/T 4288-2018
|
Household and similar electrical washing machine
|
|
GB/T 21360-2018
|
Refrigerant compressor for automobile air conditioning
|
|
GB/T 36120-2018
|
Production label for child restraint system of power-driven vehicles
|
|
GB/T 19071.1-2018
|
Wind turbines -- Asynchronous generator -- Part 1: Technical conditions
|
|
GB/T 24593-2018
|
Welded austenitic stainless-steel tubes for boiler and heat exchanger
|
|
GB/T 36388-2018
|
Specification for integrated vector management -- Construction site
|
|
GB/T 36398-2018
|
Lanthanum cerium-magnesium alloy
|
|
GB/T 36427-2018
|
Specification for conformance test of IoT household electrical appliance
|
|
GB/T 36268-2018
|
Test method of energy consumption per unit products for laminated glass
|
|
GB/T 36269-2018
|
Determination of trace nickel for plate glass
|
|
GB/T 36274-2018
|
Technical specification for energy management system of microgrids
|
|
GB/T 36277-2018
|
Technical specification for on-board static DC electric energy meter of electric vehicle
|
|
GB/T 36278-2018
|
Technical code for electric vehicle charging/battery swap infrastructure interconnecting to distribution network
|
|
GB/T 36400-2018
|
Standard terminology of decorative glass
|
|
GB/T 36404-2018
|
On-line detection for spot faults of flat glass
|
|
GB/T 36405-2018
|
Test method for stress in flat glass
|
|
GB/T 36406-2018
|
Test method of tin penetrated on float glass surface
|
|
GB/T 609-2018
|
Chemical reagent -- General method for the determination of total nitrogen
|
|
GB/T 18411-2018
|
Power-driven vehicles manufacturer plate
|
|
GB/T 36282-2018
|
Electromagnetic compatibility requirements and test methods of drive motor system for electric vehicles
|
|
GB/T 1222-2016
|
Spring steels
|