|
Std ID |
Description (Standard Title) |
|
GB/T 20159.8-2008
|
Classification of environmental conditions -- Guidance for the correlation and transformation of environmental condition classes to the environmental tests -- Introduction
|
|
GB/T 20160-2006
|
Recommended practice for testing insulation resistance of rotating machinery
|
|
GB/T 20161-2006
|
Inverter power supply cage induction motor Application Guide
|
|
GB/T 20161-2008
|
Cage induction motors when fed from converters -- Application guide
|
|
GB/T 2016-1980
|
(White Portland cement whiteness test methods)
|
|
GB/T 20162-2006
|
Method for collection of physical evidence for fire technical identification
|
|
GB/T 20163-2006
|
China MARC format for archives
|
|
GB/T 20164-2006
|
Prevention and control specifications for mail and mail handling systems in the area of when epidemics breakout
|
|
GB/T 20165-2006
|
Rare earth polishing powder
|
|
GB/T 20165-2012
|
Rare earth polishing powder
|
|
GB/T 20166.1-2006
|
Chemical analysis methods of rare earth polishing powder -- Determination of cerium oxide content -- Titrimetric analysis method
|
|
GB/T 20166.1-2012
|
Chemical analysis methods of rare earth polishing powder -- Part 1: Determination of cerium oxide content -- Titrimetry
|
|
GB/T 20166.2-2006
|
Chemical analysis methods of rare earth polishing powder -- Determination fluorine content -- Ion selective electrode analysis
|
|
GB/T 20166.2-2012
|
Chemical analysis methods of rare earth polishing powder -- Part 2: Determination fluorine content -- Ion selective electrode analysis
|
|
GB/T 20167-2006
|
Physical test method of rare earth polishing powder -- Determination of burnishing mass -- Gravimetric analysis method
|
|
GB/T 20167-2012
|
Physical test method of rare earth polishing powder -- Determination of burnishing mass and scratch -- Gravimetry
|
|
GB/T 20168-2006
|
Rapidly-quenched neodymium iron boron permanent magnetic powder
|
|
GB/T 20169-2006
|
Mixed rare earth oxide of ion-absorbed type rare earth ore
|
|
GB/T 10263.10-1988
|
Basic enviromental testing procedures for radiation detectors--Transportation test
|
|
GB/T 20170.1-2006
|
Test methods for physical characters of rare earth metals and their compounds -- Determination for particle size distribution of rare earth compounds
|
|
GB/T 20170.2-2006
|
Test method of physical characters of rare earth metals and compounds -- Determination on specific surface area of rare earth compounds
|
|
GB/T 20171-2006
|
EPA system architecture and communication specification for use in industrial control and measurement systems
|
|
GB/T 20172-2006
|
Petroleum and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment
|
|
GB/T 20173-2006
|
Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves
|
|
GB/T 20173-2013
|
Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves
|
|
GB/T 20174-2006
|
Petroleum and natural gas industries -- Drilling and production equipment -- Drill-through equipment
|
|
GB/T 20175-2006
|
Surface chemical analysis -- Sputter depth profiling -- Optimization using layered system as reference materials
|
|
GB/T 20176-2006
|
Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
|
|
GB/T 2018-1987
|
Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
|
|
GB/T 2018-2011
|
Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
|
|
GB/T 20183.1-2006
|
Equipment for crop protection -- Spraying equipment -- Part 1: Test methods for sprayer nozzles
|
|
GB/T 20183.2-2006
|
Equipment for crop protection -- Spraying equipment -- Part 2: Test methods for hydraulic sprayers
|
|
GB/T 20183.3-2006
|
Equipment for crop protection -- Spraying equipment -- Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
|
|
GB/T 20184-2006
|
Technical condition for Raman Fiber Amplifier
|
|
GB/T 20185-2006
|
Optical interface requirements for equipment and systems relating to the synchronous digital hierarchy
|
|
GB/T 20186.1-2006
|
Secondary coating materials used for optical fiber -- Part 1: Polybutylene terephthalate
|
|
GB/T 20186.2-2008
|
Secondary coating materials used for optical fiber -- Part 2: Modified propylene resin
|
|
GB/T 20187-2006
|
Characteristics of optical transport network hierarchy equipment functional blocks
|
|
GB/T 20188-2006
|
Determination of bromate in wheat flour -- Ion chromatography method
|
|
GB/T 20189-2006
|
Determination of ractopamine in animal feeds -- High performance liquid chromatographic method
|
|
GB/T 20190-2006
|
Detection of bovine, sheep and goat-derived material in feeds - Qualitative polymerase chain reaction (PCR) method
|
|
GB/T 20191-2006
|
Microbiological examination of Lactobacillus acidophilus in feeds
|
|
GB/T 2019-1987
|
Fundamental parameters and technical requirements for audio tape recorders
|
|
GB/T 20192-2006
|
Universal technical specifications for pellet mill
|
|
GB/T 10263.1-1988
|
Basic enviromental testing procedures for radiation detectors--General program
|
|
GB/T 20194-2006
|
Animal feeding stuffs -- Determination of starch content -- Polarimetric method
|
|
GB/T 20195-2006
|
Animal feeding stuffs -- Preparation of test samples
|
|
GB/T 20196-2006
|
Determination of salinomycin in feeds
|
|
GB/T 10263.2-1988
|
Basic enviromental testing procedures for radiation detectors--Temperature test
|
|
GB/T 20198-2006
|
Surface active agents -- Detergents -- Anionic-active matter hydrolyzable under alkaline conditions -- Determination of hydrolyzable and non-hydrolyzable anionic-active matter
|
|
GB/T 20199-2006
|
Surface active agents -- Technical alkane sulfonates -- Determination of alkane monosulfonate content by direct
|
|
GB/T 20200-2006
|
Sodium alpha-olefin sulfonate
|
|
GB/T 20201-2006
|
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
|
|
GB/T 2020-1980
|
Recording magnetic tape with 9 magnetic tracks, 12.7mm width and 32 lines/mm for information processing exchange
|
|
GB/T 20202-2006
|
Ethylene-vinyl acetate copolymer (EVA) blown covering film for agriculture
|
|
GB/T 20203-2006
|
Technical specification for irrigation projects with low pressure pipe conveyance
|
|
GB/T 20204-2006
|
General testing specification of automatic system equipment for water resources and hydrology
|
|
GB/T 20205-2006
|
Micropore anti-counterfeiting marker generated by heavy ion
|
|
GB/T 20206-2006
|
Technical specification of banking seal verification system
|
|
GB/T 20207.1-2006
|
Acrylonitrile-butadiene-styrene (ABS) pressure piping systems -- Part 1: Pipes
|
|
GB/T 20207.2-2006
|
Acrylonitrile-butadiene-styrene (ABS) pressure piping systems -- Part 1: Pipes
|
|
GB/T 20209-2006
|
AL-Mg Alloy powdery for fireworks and firecrackers
|
|
GB/T 20210-2006
|
Aluminium powdery for fireworks and firecrackers
|
|
GB/T 20211-2006
|
Titanium powders for fireworks and firecrackers
|
|
GB/T 20212-2006
|
Composition of fixing fuse for firecrackers
|
|
GB/T 20213-2006
|
Expand perlite powder for firecrackers
|
|
GB/T 20214-2006
|
Crystalline layered sodium disilicate
|
|
GB/T 20215-2006
|
Timekeeping instrument -- Wristwatch-cases -- Fixing dimensions of non-spring-bar types
|
|
GB/T 20216-2006
|
Determination of effective residual ink
|
|
GB/T 20216-2016
|
Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) -- Infrared reflectance measurement
|
|
GB/T 20217-2006
|
Procedures for ensuring the cleanness of industrial-process measurement and control equipment in oxygen service
|
|
GB/T 11064.10-1989
|
Lithium carbonate and lithium hydroxide monohydrate--Determination of chloride content--Mercurmetric method
|
|
GB/T 20219-2006
|
Spray-applied rigid polyurethane cellular plastics
|
|
GB/T 20219-2015
|
Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation
|
|
GB/T 20220-2006
|
Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
|
|
GB/T 20221-2006
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes for non-pressure buried drainage and sewerage systems
|
|
GB/T 2022-1980
|
Test method for heat of hydration of cement (adiabatic method)
|
|
GB/T 20222-2006
|
General technical requirements of anti-copying technical products
|
|
GB/T 20223-2006
|
Cotton linter
|
|
GB/T 20224-2006
|
Determination of exposure index, ISO speed ratings, standard output sensitivity and recommended exposure index for digital still cameras
|
|
GB/T 20225-2006
|
Electronic imaging -- Vocabulary
|
|
GB/T 20226.1-2006
|
Micrographics -- A6 size microfilm jackets -- Part 1: Five channel jacket for 16 mm microfilm
|
|
GB/T 20226.2-2006
|
Micrographics -- A6 size microfilm jackets -- Part 2: Other types of jacket for 16mm and 35mm microfilm
|
|
GB/T 20228-2006
|
Gallium arsenide single crystal
|
|
GB/T 20229-2006
|
Gallium phosphide single crystal
|
|
GB/T 20230-2006
|
Indium phosphide single crystal
|
|
GB/T 20231-2006
|
Cinematography -- Interchange of post-production materials
|
|
GB/T 20232-2006
|
Micrographics -- Use of bar codes on aperture cards
|
|
GB/T 20233-2006
|
Micrographics -- A6 size aperture cards
|
|
GB/T 10263.3-1988
|
Basic enviromental testing procedures for radiation detectors--Moisture test
|
|
GB/T 10263.4-1988
|
Basic enviromental testing procedures for radiation detectors--Tests for effect of magnetic field
|
|
GB/T 10263.5-1988
|
Basic enviromental testing procedures for radiation detectors--Effective testing of exposure to light
|
|
GB/T 10263.6-1988
|
Basic enviromental testing procedures for radiation detectors--Irradiation test
|
|
GB/T 10263.7-1988
|
Basic enviromental testing procedures for radiation detectors--Test for effect of salt mist
|
|
GB/T 10263.8-1988
|
Basic enviromental testing procedures for radiation detectors--Vibration test
|
|
GB/T 20234-2006
|
Electric vehicle conductive charging plugs and sockets, vehicle couplers and vehicle jack General requirements
|
|
GB/T 20235-2006
|
Technical specification for silver-tin oxide electric contact materials
|
|
GB/T 20236-2006
|
Accelerated outdoor weather test methods for nonmetallic materials using concentrated natural sunlight
|
|
GB/T 20236-2015
|
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight
|
|
GB/T 20238-2006
|
Installation, inspection and usage guidelines for wooden flooring
|