|
Std ID |
Description (Standard Title) |
|
GB/T 17385-1998
|
Shipbuilding. Principal ship dimensions. Terminology and definitions for computer application
|
|
GB/T 17386-1998
|
Recommended practice for sizing and selection of electric submersible pump installations
|
|
GB/T 17386-2009
|
Sizing and selection of electric submersible pump installations
|
|
GB/T 17387-1998
|
Recommended practice for the operation, maintenance and troubleshooting of electric submersible pump installations
|
|
GB/T 17388-1998
|
Recommended practice for electric submersible pump installations
|
|
GB/T 17388-2010
|
Electric submersible pump installations
|
|
GB/T 17389-1998
|
Recommended practice for application of ESP submersible cable systems
|
|
GB/T 17389-2013
|
Recommended practice for the application of electrical submersible cable system
|
|
GB/T 17390-1998
|
Recommended practice for electrical submersible pump teardown report
|
|
GB/T 17390-2010
|
Recommended practice for electrical submersible pump teardown report
|
|
GB/T 17391-1998
|
Test method for thermal stability of polyethylene pipes and fittings
|
|
GB/T 1739-1979
|
(Insulating oil paint film assays)
|
|
GB/T 17392-1998
|
Fabric for national flag
|
|
GB/T 17392-2008
|
Fabric for national flag
|
|
GB/T 17393-1998
|
Standard specification of thermal insulation materials for use over austenitic stainless steel
|
|
GB/T 17393-2008
|
Specification for thermal insulation for use in contact with austenitic stainless steel
|
|
GB/T 17394.1-2014
|
Metallic materials - Leeb hardness test - Part 1: Test method
|
|
GB/T 17394.2-2012
|
Metallic materials -- Leeb hardness test -- Part 2: Verification and calibration of hardness testers
|
|
GB/T 17394.3-2012
|
Metallic materials -- Leeb hardness test -- Part 3: Calibration of reference blocks
|
|
GB/T 17394.4-2014
|
Metallic materials - Leeb hardness test - Part 4: Tables of hardness values conversation
|
|
GB/T 17394-1998
|
Metallic materials--Leeb hardness test
|
|
GB/T 17395-1998
|
Dimensions, shapes, masses and tolerances of seamless steel tubes
|
|
GB/T 10123-1988
|
Metal--Terms and definition of corrosion and protection
|
|
GB/T 17396-1998
|
Seamless hot-rolled steel tubes for hydraulic pillar service
|
|
GB/T 10123-2001
|
Corrosion of metals and alloys -- Basic terms and definitions
|
|
GB/T 17397-1998
|
Code of dust and poison control for aluminium electrowinning
|
|
GB/T 17397-2012
|
Regulations for dust and poison control of aluminium electrowinning
|
|
GB/T 17398-1998
|
Code of dust and poison control for lead smelting
|
|
GB/T 17398-2013
|
Code of dust and poison control for lead smelting
|
|
GB/T 1740-1979
|
Methods of test for resistance to heat and humidity of paint films
|
|
GB/T 1740-2007
|
Determination of resistance to heat and humidity of paint films
|
|
GB/T 17406-1998
|
Determination of phytic acid in food
|
|
GB/T 17407-1998
|
Determination of vitamin B6 in foods
|
|
GB/T 17408-1998
|
Determination of isoprothiolane residues in rice
|
|
GB/T 17409-1998
|
General principle for the determination of migration of packaging materials and their products
|
|
GB/T 17410-1998
|
Organic heat transfer material heaters
|
|
GB/T 17410-2008
|
Organic heat transfer material heaters
|
|
GB/T 17411-1998
|
Petroleum products--Fuels (class F)--Specifications of marine fuels
|
|
GB/T 17411-2012
|
Marine Fuels oils
|
|
GB/T 1741-1979
|
Methods of test for mold resistance of paint films
|
|
GB/T 17412.1-1998
|
Classification and namenclature schemes of the rocks. Classification and namenclature schemes of igneous rock
|
|
GB/T 17412.2-1998
|
Classification and nomenclature schemes of the rocks. Classification and nomenclature schemes of sedimentary rock
|
|
GB/T 17412.3-1998
|
Classification and Nomenclature Schemes of The Rocks Classification and Nomenclature Schemes of metamorphic Rocks
|
|
GB/T 1741-2007
|
Test methods for determining the resistance of paints film to mold
|
|
GB/T 17413.1-1998
|
Methods for chemical analysis of Lithium, Rubidium and Cesium ores. Determination of Lithium content. Flame atomic absorption/emission spectrophotometric method
|
|
GB/T 17413.1-2010
|
Methods for chemical analysis of lithium, rubidium and cesium ores - Part 1: Determination of lithium content
|
|
GB/T 17413.2-1998
|
Methods for chemical analysis of Lithium, Rubidium and Cesium ores. Determination of Rubidium content. Flame atomic absorption/emission spectrophotometric method
|
|
GB/T 17413.2-2010
|
Methods for chemical analysis of lithium, rubidium and cesium ores -- Part 2: Determination of rubidium content
|
|
GB/T 17413.3-1998
|
Methods for chemical analysis of lithium, rubidium and cesium ores. Determination of Cesium content. Flame atomic absorption/emission spectrophotometric method
|
|
GB/T 17413.3-2010
|
Methods for chemical analysis of lithium, rubidium and cesium ores -- Part 3: Determination of cesium content
|
|
GB/T 17414.1-1998
|
Method for chemical analysis of beryllium ores--Determination of beryllium content--Eriochrome cyanine R photometric method
|
|
GB/T 17414.1-2010
|
Method for chemical analysis of beryllium ores -- Part 1: Determination of beryllium content -- Eriochrome cyanine R photometric method
|
|
GB/T 17414.2-1998
|
Method for chemical analysis of beryllium ores--Determination of beryllium content-catalytic polarographic method
|
|
GB/T 17414.2-2010
|
Method for chemical analysis of beryllium ores -- Part 2: Determination of beryllium content -- Catalytic polarographic method
|
|
GB/T 17415.1-1998
|
Methods for chemical analysis of Tantalum and Niobium ores--Determination of Tantalum content--Preconcentration and separation with silica gel--Butyl rhodamine B extraction photometric method
|
|
GB/T 17415.1-2010
|
Methods for chemical analysis of tantalum and niobium ores -- Part 1: Determination of tantalum content
|
|
GB/T 17415.2-1998
|
Methods for chemical analysis of Tantalum and Niobium ores--Determination of Niobium content--Preconcentration and separation with silica gel--Thiocyanate extraction photometric method
|
|
GB/T 17415.2-2010
|
Methods for chemical analysis of tantalum and niobium ores -- Part 2: Determination of niobium content
|
|
GB/T 17416.1-1998
|
Method for chemical analysis of Zirconium ores--Determination of Zirconium (Hafnium) content--xylenol orange photometric method
|
|
GB/T 17416.1-2010
|
Method for chemical analysis of zirconium ores -- Part 1: Determination of zirconium-hafnium oxide content
|
|
GB/T 17416.2-1998
|
Method for chemical analysis of Zirconium ores. Determination of Zirconium and Hafnium contents. X-ray fluorescence spectrometric method
|
|
GB/T 17416.2-2010
|
Method for chemical analysis of zirconium ores -- Part 2: Determination of zirconium and hafnium contents
|
|
GB/T 17417.1-1998
|
Method for chemical analysis of rare earth ores--Determination of separated rare earth content--Preconcentration and separation by cation exchange resin, ICP-AES method
|
|
GB/T 17417.1-2010
|
Method for chemical analysis of rare earth ores -- Part 1: Determination of rare earths
|
|
GB/T 17417.2-1998
|
Method for chemical analysis of rare earth ores--Determination of scandium content--ICP-AES method
|
|
GB/T 17417.2-2010
|
Method for chemical analysis of rare earth ores -- Part 2: Determination of scandium content
|
|
GB/T 17418.1-1998
|
Methods for analysis of noble metals in geochemical samples--General rules and regulations
|
|
GB/T 17418.1-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 1: General rules and regulations
|
|
GB/T 17418.2-1998
|
Methods for analysis of noble metals in geochemical samples--Determination of platinum and rhodium content-Preconcentration by thiourea-Catalytic polarographic method
|
|
GB/T 17418.2-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 2: Determination of platinum and rhodium content -- Preconcentration by thiourea-catalytic polarographic method
|
|
GB/T 17418.3-1998
|
Methods for analysis of noble metals in geochemical samples--Determination of palladium content-Preconcentration by thiourea-Graphite furnace atomic absorption spectrophotometric method
|
|
GB/T 17418.3-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 3: Determination of palladium content -- Preconcentration by thiourea-graphite furnace atomic absorption spectrophotometric method
|
|
GB/T 17418.4-1998
|
Methods for analysis of noble metals in geochemical samples--Determination of iridium content-Preconcentration by thiourea-Catalytic spectrophotometric method
|
|
GB/T 17418.4-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 4: Determination of iridium content -- Preconcentration by thiourea-catalytic spectrophotometric method
|
|
GB/T 17418.5-1998
|
Methods for analysis of noble metals in geochemical samples--Determination of ruthenium and osmium content-Separation by distillation-Catalytic spectrophotometric method
|
|
GB/T 17418.5-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 5: Determination of ruthenium and osmium content -- Separation by distillation-catalytic spectrophotometric method
|
|
GB/T 17418.6-1998
|
Methods for analysis of noble metals in geochemical samples--Determination of platinum, palladium and gold content-Preconcentration by fire assay-Emission spectrographic method
|
|
GB/T 17418.6-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 6: Determination of platinum, palladium and gold content -- Preconcentration by fire assay-emission spectrometry
|
|
GB/T 17418.7-2010
|
Methods for analysis of noble metals in geochemical samples -- Part 7: Determination of platinum group elements -- By nickel sulfide fire assay-inductively coupled plasma mass spectrometry
|
|
GB/T 17419-1998
|
Foliar fertilizer with amino acid
|
|
GB/T 17420-1998
|
Foliar microelement fertilizer
|
|
GB/T 17421.1-1998
|
Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
|
|
GB/T 17421.2-2000
|
Test code for machine tools. Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
|
|
GB/T 17421.2-2016
|
Test code for machine tools -- Part 2: Determination of accuracy and repeatability positioning numerically controlled axes
|
|
GB/T 17421.3-2009
|
General machine test -- Part 3: determination of thermal effects
|
|
GB/T 17421.4-2003
|
Test code for machine tools -- Part 4: Circular tests for numerically controlled machine tools
|
|
GB/T 17421.4-2016
|
Test code for machine tools -- Part 4: Circular tests for numerically controlled machine tools
|
|
GB/T 17421.5-2015
|
Test code for machine tools -- Part 5: Determination of the noise emission
|
|
GB/T 17421.6-2016
|
Test code for machine tools -- Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
|
|
GB/T 17421.7-2016
|
Test code for machine tools -- Part 7: Geometric accuracy of axes of rotation
|
|
GB/T 1742-1979
|
Methods of test for adhesive strength of sizes
|
|
GB/T 17423-1998
|
Series 1 freight containers. Interface connections for tank containers
|
|
GB/T 17424-1998
|
Technical requirements of differential global positioning system
|
|
GB/T 17424-2009
|
Technical requirements of differential global navigation satellite system
|
|
GB/T 17425-1998
|
Purchase and acceptance of couplers and coupler yokes for freight service
|
|
GB/T 17426-1998
|
Dynamic performance evaluation and test method for particular class vehicles and tracked machine
|
|
GB/T 17428-2009
|
Fire resistance test methods of ventilation ducts
|
|
GB/T 17430-1998
|
Estimating the maximum use temperature of thermal insulation
|
|
GB/T 17430-2015
|
Estimating the maximum service temperature of thermal insulation
|
|
GB/T 17431.1-1998
|
Lightweight aggregates and its test methods--Part 1: Lightweight aggregates
|