|
Std ID |
Description (Standard Title) |
|
GB/T 15938-1995
|
General specification for equipment of radio paging system
|
|
GB/T 15939-1995
|
General specification for land mobile communication system equipment using multi-channel access techniques without a central controller
|
|
GB/T 15940-1995
|
Basic multiplexing structure for synchronous digital hierarchy signals
|
|
GB/T 15940-2008
|
Basic multiplexing structure for synchronous digital hierarchy signals
|
|
GB/T 15941-1995
|
Requirements for synchronous digital hierarchy (SDH) optical fiber cable line systems of national public telecommunication network
|
|
GB/T 15941-2008
|
Requirements for Synchronous Digital hierarchy (SDH) Optical Fiber Cable Line Systems
|
|
GB/T 15942-1995
|
Technical requirement and testing methods for mobile station access to 900MHz public mobile telecommunication system
|
|
GB/T 15943-1995
|
Technical specification measuring method of broadcasting audio channel
|
|
GB/T 15945-1995
|
Quality of electric energy supply. Permissible deviation of frequency for power system
|
|
GB/T 15945-2008
|
Power quality -- Frequency deviation for power system
|
|
GB/T 15946-1995
|
Standard digital interface for programmable instrumentation
|
|
GB/T 15946-2008
|
Higher performance protocol for the standard digital interface for programmable instrumentation -- General
|
|
GB/T 15947-1995
|
Design of UN/EDIFACT messages guidelines and rules
|
|
GB/T 15947-2001
|
EDIFACT message design rules for EDI
|
|
GB/T 15947-2011
|
EDIFACT message design rules for EDI
|
|
GB/T 15948.1-1995
|
Bank telecommunication--Funds transfer message. Part 1: Vocabulary and data elements
|
|
GB/T 15948.1-2007
|
Bank telecommunication -- Funds transfer messages -- Part 1: Vocabulary and universal set of data segments and data elements for electronic funds transfer messages
|
|
GB/T 15948-1995
|
Bank telecommunication--Funds transfer message--Part 1: Vocabulary and data elements
|
|
GB/T 15950-1995
|
General requirements for environmental radiation monitoring around near surface disposal site of low-intermediate level radioactive solid waste
|
|
GB/T 15951-1995
|
Mechanical coupler for measurements on bone vibrators
|
|
GB/T 15952-1995
|
Specifications for personal sound exposure meters
|
|
GB/T 15952-2010
|
Electroacoustics -- Specifications for personal sound exposure meters
|
|
GB/T 15953-1995
|
Instruments for the measurement of aural acoustic impedance/admittance
|
|
GB/T 15956-1995
|
Calcium carbide steel drum for the home market
|
|
GB/T 15956-2008
|
Calcium carbide steel drum for repeated use
|
|
GB/T 15957-1995
|
Corrosivity classification of atmospheric environment
|
|
GB/T 15958-1995
|
Determination of speed of black-and-white motion-picture negative film
|
|
GB/T 15959-1995
|
Water quality. Determination of adsorbable organic halogens (AOX). Microcoulometric method
|
|
GB/T 15960-1995
|
Single sideband (SSB) system specifications for HF broadcasting
|
|
GB/T 1596-1991
|
Fly ash used for cement and concrete
|
|
GB/T 1596-2005
|
Fly ash used for cement and concrete
|
|
GB/T 15962-1995
|
Glossary of printing ink terms
|
|
GB/T 15962-2008
|
Glossary of printing ink terms
|
|
GB/T 15963-1995
|
Sodium lauryl surfate
|
|
GB/T 15963-2008
|
Sodium lauryl sulfate
|
|
GB/T 15964-1995
|
Hand-knotted carpets--Determination of number of tufts per unit length
|
|
GB/T 15964-2008
|
Carpets -- Determination of number of tufts or loops per unit length and per unit area
|
|
GB/T 15965-1995
|
Hand-knotted carpet--Determination of length of pile
|
|
GB/T 15965-2008
|
Hand-made carpets -- Determination of length of Pile
|
|
GB/T 15966-1995
|
Primary parameter and general specification for hydrologic instrument
|
|
GB/T 15966-2007
|
Primary parameter and general specification for hydrologic instrument
|
|
GB/T 15967-2008
|
Specifications for aerial photogrammetric digital mapping of 1: 500 1: 1000 1: 2000 topographic maps
|
|
GB/T 15968-2008
|
Specifications for remote sensing image plan making
|
|
GB/T 15969.1-1995
|
Programmable controllers. Part 1: Grneral information
|
|
GB/T 15969.1-2007
|
Programmable controllers -- Part 1: General information
|
|
GB/T 15969.2-1995
|
Programmable controllers. Part 2: Equipment characteristics
|
|
GB/T 15969.2-2008
|
Programmable controllers -- Part 2: Equipment requirements and tests
|
|
GB/T 15969.3-1995
|
Programmable controllers. Part 3: Programming languages
|
|
GB/T 15969.3-2005
|
Programmable controllers -- Part 3: Programming languages
|
|
GB/T 15969.4-1995
|
Programmable controllers. Part 4: User guidelines
|
|
GB/T 15969.4-2007
|
Programmable controllers -- Part 4: User guidelines
|
|
GB/T 15969.5-2002
|
Programmable controllers -- Part 5: Communications
|
|
GB/T 15969.6-2015
|
Programmable controllers -- Part 6: Functional safety
|
|
GB/T 15969.7-2008
|
Programmable controllers -- Part 7: Fuzzy control programming
|
|
GB/T 15969.8-2007
|
Programmable controllers -- Part 8: Guidelines for the application and implementation of programming languages
|
|
GB/T 15970.1-1995
|
Corrosion of metals and alloys-Stress corrosion testing. Part 1: General guidance on testing procedures
|
|
GB/T 15970.2-2000
|
Corrosion of metals and alloys. Stress corrosion testing. Part 2: Preparation and use of bent-beam specimens
|
|
GB/T 15970.3-1995
|
Corrosion of metals and alloys. Stress corrosion testing. Part 3: Preparation and use of U--bend specimens
|
|
GB/T 15970.4-2000
|
Corrosion of metals and alloys. Stress corrosion testing. Part 4: Preparation and use of uniaxially loaded tension specimens
|
|
GB/T 15970.5-1998
|
Corrosion of metals and alloy. Stress corrosion testing. Part 5: Preparation and use of C-ring specimens
|
|
GB/T 15970.6-1998
|
Corrosion of metals and alloys--Stress corrosion testing--Part 6: Preparation and use of pre-cracked specimens
|
|
GB/T 15970.6-2007
|
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
|
|
GB/T 15970.7-2000
|
Corrosion of metals and alloys. Stress corrosion testing. Part 7: Slow strain rate testing
|
|
GB/T 15970.8-2005
|
Corrosion of metals and alloys -- Stress corrosion test -- Part 8: Preparation and use of specimens to evaluate weldments
|
|
GB/T 15970.9-2007
|
Corrosion of metals and alloys -- Stress corrosion testing -- Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
|
|
GB/T 15971-1995
|
Quality of tour-guide service
|
|
GB/T 15971-2010
|
Specifications for tour-guide service
|
|
GB/T 1597-1979
|
Iridium crucible
|
|
GB/T 15972.10-2008
|
Specifications for optical fibre test methods -- Part 10: Measurement methods and test procedures -- General and guidance
|
|
GB/T 15972.1-1998
|
Generic specification for optical fibres. Part 1: General
|
|
GB/T 15972.20-2008
|
Specifications for optical fibre test methods -- Part 20: Measurement methods and test procedures for dimensions -- Fiber geometry
|
|
GB/T 15972.21-2008
|
Specifications for optical fibre test methods -- Part 121: Measurement methods and test procedures for dimensions -- Coating geometry
|
|
GB/T 15972.2-1998
|
Generic specification for optical fibres. Part 2: Measuring methods for dimensions
|
|
GB/T 15972.22-2008
|
Specifications for optical fibre test methods -- Part 22: Measurement methods and test procedures for dimensions -- Length measurement
|
|
GB/T 15972.30-2008
|
Specifications for optical fibre test methods -- Part 30: Measurement methods and test procedures for mechanical characteristics -- Fibre proof test
|
|
GB/T 15972.31-2008
|
Specifications for optical fibre test methods -- Part 31: Measurement methods and test procedures for mechanical characteristics -- Tensile strength
|
|
GB/T 15972.3-1998
|
Generic specification for optical fibres. Part 3: Measuring methods for mechanical characteristics
|
|
GB/T 15972.32-2008
|
Specifications for optical fibre test methods -- Part 32: Measurement methods and test procedures for mechanical characteristics -- Coating stripability
|
|
GB/T 15972.33-2008
|
Specifications for optical fibre test methods -- Part 33: Measurement methods and test procedures for mechanical characteristics -- Stress corrosion susceptibility
|
|
GB/T 15972.34-2008
|
Specifications for optical fibre test methods -- Part 34: Measurement methods and test procedures for mechanical characteristics -- Fibre curl
|
|
GB/T 15972.40-2008
|
Specifications for optical fibre test methods -- Part 40: Measurement methods and test procedures for transmission and optical characteristics -- Attenuation
|
|
GB/T 15972.41-2008
|
Specifications for optical fibre test methods -- Part 41: Measurement methods and test procedures for transmission and optical characteristics -- Bandwidth
|
|
GB/T 15972.4-1998
|
Generic specification for optical fibres. Part 4: Measuring methods for transmission and optical characteristics
|
|
GB/T 15972.42-2008
|
Specifications for optical fibre test methods -- Part 42: Measurement methods and test procedures for transmission and optical characteristics -- Chromatic dispersion
|
|
GB/T 15972.43-2008
|
Specifications for optical fibre test methods -- Part 43: Measurement methods and test procedures for transmission and optical characteristics -- Numerical aperture
|
|
GB/T 15972.44-2008
|
Specifications for optical fibre test methods -- Part 44: Measurement methods and test procedures for transmission and optical characteristics -- Cut-off wavelength
|
|
GB/T 15972.45-2008
|
Specifications for optical fibre test methods -- Part 45: Measurement methods and test procedures for transmission and optical characteristics -- Mode field diameter
|
|
GB/T 15972.46-2008
|
Specifications for optical fibre test methods -- Part 46: Measurement methods and test procedures for transmission and optical characteristics -- Monitoring of changes in optical transmittance
|
|
GB/T 15972.47-2008
|
Specifications for optical fibre test methods -- Part 47: Measurement methods and test procedures for transmission and optical characteristics -- Macro-bending loss
|
|
GB/T 15972.48-2016
|
Specifications for optical fibre test methods -- Part 48: Measurement methods and test procedures for transmission and optical characteristics -- Polarization mode dispersion
|
|
GB/T 15972.49-2008
|
Specifications for optical fibre test methods -- Part 49: Measurement methods and test procedures for transmission and optical characteristics -- Differential mode delay
|
|
GB/T 15972.50-2008
|
Specifications for optical fibre test methods -- Part 50: Measurement methods and test procedures for environmental characteristics -- Damp heat (steady state)
|
|
GB/T 15972.51-2008
|
Specifications for optical fibre test methods -- Part 51: Measurement methods and test procedures for environmental characteristics -- Dry heat
|
|
GB/T 15972.5-1998
|
Generic specification for optical fibres. Part 5: Measuring methods for environmental characteristics
|
|
GB/T 15972.52-2008
|
Specifications for optical fibre test methods -- Part 52: Measurement methods and test procedures for environmental characteristics -- Change of temperature
|
|
GB/T 15972.53-2008
|
Specifications for optical fibre test methods -- Part 53: Measurement methods and test procedures for environmental characteristics -- Water immersion
|
|
GB/T 15972.54-2008
|
Specifications for optical fibre test methods -- Part 54: Measurement methods and test procedures for environmental characteristics -- Gamma irradiation
|
|
GB/T 15972.55-2009
|
Specifications for optical fibre test methods -- Part 55: Measurement methods and test procedures for environmental characteristics -- Hydrogen aging
|
|
GB/T 1597-2004
|
Iridium crucible
|
|
GB/T 15972-1995
|
Generic specification for optical fibers
|