|
Std ID |
Description (Standard Title) |
|
GB 35373-2017
|
HFC fire extinguishing agents
|
|
GB 35574-2017
|
The norm of energy consumption per unit product of combined heat and power generation
|
|
GB 35650-2017
|
Basic specifications for surveying and mapping of national fundamental scale maps
|
|
GB 4066-2017
|
Powder extinguishing agent
|
|
GB/Z 30556.1-2017
|
Electromagnetic compatibility -- Installation and mitigation guidelines -- General considerations
|
|
GB/Z 35140-2017
|
Measurement of fluid flow by means of pressure-differential devices -- Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of GB/T 2624
|
|
GB/Z 35588-2017
|
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
|
|
GB/Z 35717-2017
|
Discharge measurement for hydraulic turbines, storage pumps and pump-turbines -- Ultrasonic transit-time method
|
|
GB/Z 35728-2017
|
Guidelines for the design of interconnected power systems
|
|
GB/T 10335.1-2017
|
Coated paper and board--Coated art paper
|
|
GB 10035-2017
|
Air-bag type sequential external counter-pulsation device
|
|
GB 12260-2017
|
Cardiopulmonary bypass systems -- Roller blood pump
|
|
GB 14035-2018
|
Lifesaving appliances for inland waterway ships -- Bed-type, pillow-type and cushion-type
|
|
GB 11100-1989
|
As-sintered carbide pellets used in punch-pressing dies for battery shell
|
|
GB 10941-1989
|
The machine for expanding rice hull--Test methods
|
|
GB/Z 30556.2-2017
|
Electromagnetic compatibility -- Installation and mitigation guidelines -- Earthing and cabling
|
|
GB/Z 35733-2017
|
Guidelines for electromagnetic compatibility requirements of equipment constituting and access to smart grid
|
|
GB/Z 35959-2018
|
General rule for liquid chromatography-mass spectrometry
|
|
GB 12441-2018
|
Finishing fire resistant coating
|
|
GB 20073-2018
|
Performance and measurement method for braking of motorcycles and mopeds
|
|
GB 1110-1985
|
End mills with parallel shank
|
|
GB 11103-1989
|
Hardmetal (carbide) for construction material drilling tools
|
|
GB 35844-2018
|
Pressure regulators for liquefied petroleum gas cylinders
|
|
GB 35848-2018
|
Commercial gas-burning appliance
|
|
GB 35971-2018
|
Minimum allowable values of the energy efficiency and energy efficiency grades for hermetic motor-compressor in room air conditioners
|
|
GB 5135.6-2018
|
Automatic sprinkler system -- Part 6: Conventional valves
|
|
GB/Z 35473-2017
|
Colour design system
|
|
GB/Z 35474-2017
|
Natural gas -- Technical explanation for calculation of physical properties from composition
|
|
GB/Z 35482-2017
|
Wind turbines -- Time-based availability
|
|
GB/Z 35483-2017
|
Wind turbines -- Production-based availability
|
|
GB 8368-2018
|
Infusion sets for single use -- Gravity feed
|
|
GB/Z 24294.1-2018
|
Information security technology -- Guide of implementation for internet-based-government information security -- Part 1: General
|
|
GB/Z 36046-2018
|
Evaluation specifications of electricity regulatory
|
|
GB/Z 6113.401-2018
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 4-1: Uncertainties, statistics and limit modelling -- Uncertainties in standardized EMC tests
|
|
GB 12352-2018
|
Safety code for passengers aerial ropeways
|
|
GB 17761-2018
|
Safety technical specification for electric bicycle
|
|
GB 11098-1989
|
As-sintered hardmetal blanks used in cold furging dies for hexagon nut
|
|
GB 36170-2018
|
Crude oils
|
|
GB 36220-2018
|
Safety technical requirements of oil transport tankers and refueling tankers
|
|
GB 36246-2018
|
Sports areas with synthetic surfaces for primary and middle schools
|
|
GB 4284-2018
|
Control standards of pollutants in sludge for agricultural use
|
|
GB 4343.1-2018
|
Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
|
|
GB 50005-2017
|
Standard for design of timber structures
|
|
GB 50017-2017
|
Code for Design of Steel Structure
|
|
GB 50077-2017
|
Standard for design of reinforced concrete silos
|
|
GB 50202-2018
|
Standard for acceptance of construction quality of building foundation
|
|
GB 50210-2018
|
Standard for construction quality acceptance of building decoration
|
|
GB 50217-2018
|
Standard for design of cables of electric power engineering
|
|
GB 50288-2018
|
Design standard for irrigation and drainage engineering
|
|
GB 50309-2017
|
Standard for inspection and acceptance of industrial of industrial furnaces building
|
|
GB 50385-2018
|
Standard for design of the mine headframes
|
|
GB 50471-2018
|
(Coal Mine Gas Drainage Engineering Design Standard)
|
|
GB 50477-2017
|
Standard for design of facility of occupational safety and health for textile industry enterprises
|
|
GB 50488-2018
|
Standard for design of acrylic fibres plant
|
|
GB 50496-2018
|
Code for construction of mass concrete
|
|
GB 50588-2017
|
Standard for design of waste heat power generation in cement plant
|
|
GB 51247-2018
|
Standard for seismic design of hydraulic structures
|
|
GB 51251-2017
|
Technical standard for smoke management systems in buildings
|
|
GB 51258-2017
|
Standard for design of fiberglass plant
|
|
GB 51260-2017
|
Technical code for environmental sanitation
|
|
GB 51270-2017
|
Code for Process Design of Magnesium smelter
|
|
GB 51276-2018
|
Standard for design of general layout and transportation for coal enterprises
|
|
GB 51282-2018
|
Standard for design of mine haulage engineering for open pit in coal industry
|
|
GB 51284-2018
|
Standard for design of flue gas desulfurization
|
|
GB 51286-2018
|
Technical code for urban road engineering
|
|
GB 51287-2018
|
Standard for design of the land reclamation in open-pit mine
|
|
GB 51291-2018
|
Design criterion for co-fired ceramic hybrid circuit substrate manufactory
|
|
GB 11099-1989
|
As-sintered hardmetal blanks used in heading dies for standard bolt
|
|
GB/Z 35035-2018
|
Specifications for operation management of apiculture project
|
|
GB/Z 35036-2018
|
Specifications for operation management of pepper project
|
|
GB/Z 35037-2018
|
Specifications for operation management of blueberry project
|
|
GB/Z 35038-2018
|
Specifications for operation management of Chinese medicinal materials (Notoginseng) project
|
|
GB/Z 35039-2018
|
Specifications for operation management of Chinese medicinal material (Codonopsis tangshen Oliv.) project
|
|
GB/Z 35040-2018
|
Specifications for operation management of poverty alleviation workshop project
|
|
GB/Z 35041-2018
|
Specifications for operation management of edible fungus project
|
|
GB/Z 35042-2018
|
Specifications for operation management of layer project
|
|
GB/Z 35043-2018
|
Specifications for operation management of photovoltaic project
|
|
GB/Z 35044-2018
|
Specifications for operation management of planting service project on internet
|
|
GB/Z 35045-2018
|
Specifications for operation management of tea project
|
|
GBZ 24-2017
|
Diagnosis of occupational decompression sickness
|
|
GBZ 294-2017
|
Diagnosis of occupational poisoning induced by indium and its compounds
|
|
GBZ 54-2017
|
Diagnosis of occupational chemical eye burns
|
|
GBZ/T 218-2017
|
Guideline for drafting diagnostic criteria of occupational diseases
|
|
GBZ/T 300.10-2017
|
Determination of toxic substances in workplace air -- Part 10: Cobalt and its compounds
|
|
GBZ/T 300.11-2017
|
Determination of toxic substances in workplace air -- Part 11: copper and its compounds
|
|
GBZ/T 300.13-2017
|
Determination of toxic substances in workplace air -- Part 13: Indium and its compounds
|
|
GBZ/T 300.149-2017
|
Determination of toxic substances in workplace air -- Part 149: Sumithion, fenthion, phosmet and methyl parathion
|
|
GBZ/T 300.159-2017
|
Determination of toxic substances in workplace air -- Part 159: Nitroglycerine, nitroglycerine, cyclotetramethylene tetranitramine and cyclotrimethylenetrinitramine
|
|
GBZ/T 300.16-2017
|
Determination of toxic substances in workplace air -- Part 16: Magnesium and its compounds
|
|
GBZ/T 300.17-2017
|
Determination of toxic substances in workplace air -- Part 17: Manganese and its compounds
|
|
GBZ/T 300.18-2017
|
Determination of toxic substances in workplace air -- Part 18: Mercury and its compounds
|
|
GBZ/T 300.19-2017
|
Determination of toxic substances in workplace air -- Part 19: Molybdenum and its compounds
|
|
GBZ/T 300.21-2017
|
Determination of toxic substances in workplace air -- Part 21: Potassium and its compounds
|
|
GBZ/T 300.22-2017
|
Determination of toxic substances in workplace air -- Part 22: Sodium and its compounds
|
|
GBZ/T 300.23-2017
|
Determination of toxic substances in workplace air -- Part 23: Strontium and its compounds
|
|
GBZ/T 300.24-2017
|
Determination of toxic substances in workplace air -- Part 24: Tantalum and its compounds
|
|
GBZ/T 300.25-2017
|
Determination of toxic substances in workplace air -- Part 25: Thallium and its compounds
|
|
GBZ/T 300.27-2017
|
Determination of toxic substances in workplace air -- Part 27: Dibutyltin dilaurate, trimethyltin chloride and triethyltin chloride
|
|
GBZ/T 300.28-2017
|
Determination of toxic substances in workplace air -- Part 28: Tungsten and its compounds
|
|
GBZ/T 300.29-2017
|
Determination of toxic substances in workplace air -- Part 29: Vanadium and its compounds
|