GB 9706.205-2020 English PDFUS$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 9706.205-2020: Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment Status: Valid
Basic dataStandard ID: GB 9706.205-2020 (GB9706.205-2020)Description (Translated English): Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment Sector / Industry: National Standard Classification of Chinese Standard: C41 Classification of International Standard: 11.40.60 Word Count Estimation: 26,285 Date of Issue: 2020-07-23 Date of Implementation: 2023-05-01 Older Standard (superseded by this standard): GB 9706.7-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 9706.205-2020: Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Medical electrical equipment--Part 2-5.Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment ICS 11.40.60 C41 National Standards of People's Republic of China Replace GB 9706.7-2008 Medical electrical equipment Part 2-5.Ultrasound physical therapy equipment Special requirements for basic safety and basic performance (IEC 60601-2-5.2009, MOD) Issued on 2020-07-23 Implemented on 2023-05-01 State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsForeword Ⅰ Introduction Ⅲ 201.1 Scope, purpose and related standards 1 201.2 Normative references 2 201.3 Terms and Definitions 2 201.4 General requirements 5 201.5 General requirements for ME equipment testing 5 201.6 Classification of ME equipment and ME systems 6 201.7 *ME equipment identification, marking and documentation 6 201.8 *ME equipment protection against electric shock 7 201.9 Protection of ME equipment and ME systems against mechanical hazards 7 201.10 Protection against unwanted or excessive radiation risks (sources) 7 201.11 Protection against over-temperature and other hazards (sources) 8 201.12 Accuracy of controllers and instruments and protection against dangerous outputs 10 201.13 Dangerous conditions and fault states of ME equipment 12 201.14 Programmable Medical Electrical System (PEMS) 12 201.15 Structure of ME equipment 12 201.16 ME System 12 201.17 *Electromagnetic compatibility of ME equipment and ME system 12 202.6 Electromagnetic compatibility 13 Appendix 14 Appendix AA (informative appendix) special guide and principle explanation 15 Appendix BB (informative appendix) Example of test arrangement for surface temperature measurement of external transducer components 19 Reference 21ForewordGB 9706 "Medical Electrical Equipment" is divided into the following parts. ---Part 1.General requirements for basic safety and basic performance; ---Part 1-3.General requirements for basic safety and basic performance Parallel standard. Radiation protection of diagnostic X-ray equipment; ---Part 2-1.Specific requirements for the basic safety and basic performance of electron accelerators with an energy of 1MeV to 50MeV; ---Part 2-2.Special requirements for the basic safety and basic performance of high-frequency surgical equipment and high-frequency accessories; ---Part 2-3.Special requirements for basic safety and basic performance of shortwave treatment equipment; ---Part 2-4.Special requirements for the basic safety and basic performance of cardiac defibrillators; ---Part 2-5.Special requirements for the basic safety and basic performance of ultrasonic physical therapy equipment; ---Part 2-6.Special requirements for the basic safety and basic performance of microwave therapy equipment; ---Part 2-8.Special requirements for the basic safety and basic performance of therapeutic X-ray equipment with an energy of 10kV to 1MV; ---Part 2-11.Special requirements for the basic safety and basic performance of gamma beam therapy equipment; ---Part 2-12.Special requirements for the basic safety and basic performance of intensive care ventilators; ---Part 2-13.Special requirements for basic safety and basic performance of anesthesia workstations; ---Part 2-16.Specific requirements for basic safety and basic performance of hemodialysis, hemodiafiltration and hemofiltration equipment; ---Part 2-17.Special requirements for basic safety and basic performance of automatic control brachytherapy after-installation equipment; ---Part 2-18.Specific requirements for basic safety and basic performance of endoscopic equipment; ---Part 2-19.Special requirements for basic safety and basic performance of infant incubators; ---Part 2-22.Special requirements for basic safety and basic performance of laser equipment for surgery, plastic surgery, treatment and diagnosis; ---Part 2-24.Special requirements for basic safety and basic performance of infusion pumps and infusion controllers; ---Part 2-25.Special requirements for basic safety and basic performance of electrocardiograph; ---Part 2-26.Special requirements for the basic safety and basic performance of EEG machines; ---Part 2-27.Special requirements for basic safety and basic performance of ECG monitoring equipment; ---Part 2-28.Special requirements for the basic safety and basic performance of medical diagnostic X-ray tube components; ---Part 2-29.Specific requirements for the basic safety and basic performance of radiotherapy simulators; ---Part 2-36.Special requirements for the basic safety and basic performance of in vitro lithotripsy equipment; ---Part 2-37.Special requirements for the basic safety and basic performance of ultrasonic diagnostic and monitoring equipment; ---Part 2-39.Special requirements for the basic safety and basic performance of peritoneal dialysis equipment; ---Part 2-43.Special requirements for the basic safety and basic performance of interventional X-ray equipment; ---Part 2-44.Special requirements for the basic safety and basic performance of X-ray computed tomography equipment; ---Part 2-45.The basic safety and basic performance of mammography equipment and mammography stereotaxic devices Claim; ---Part 2-54.Special requirements for the basic safety and basic performance of X-ray photography and fluoroscopy equipment; ---Part 2-60.Special requirements for basic safety and basic performance of dental equipment; ---Part 2-63.Special requirements for the basic safety and basic performance of extraoral imaging dental X-ray machines; ---Part 2-65.Specific requirements for the basic safety and basic performance of intraoral imaging dental X-ray machines; ---Part 2-66.Special requirements for basic safety and basic performance of hearing equipment and hearing equipment system. This part is part 2-5 of GB 9706. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB 9706.7-2008 "Medical Electrical Equipment Part 2-5.Special Requirements for the Safety of Ultrasonic Physical Therapy Equipment", and Compared with GB 9706.7-2008, the main technical changes are as follows. ---Added "Basic safety and basic performance special requirements" (see.201.1.1); ---Added "Special requirements for basic safety and basic performance" (see.201.1.2); ---Modified the "normative references" (see.201.2, 1.5 of the.2008 edition); ---Added the "increased basic performance requirements" (see.201.4.3.11); --- Added "Patient Auxiliary Current Measurement" (see.201.8.7.4.8); ---Added "dielectric strength" (see.201.8.8.3); --- Added "ultrasonic energy" (see.201.10.101); ---Added the "application part that does not provide heat to the patient" (see.201.11.1.2.2); ---Modified "measurement" (see.2011.11.1.3, 42.3 of the.2008 edition); --- Added "Accuracy of Controllers and Instruments" (see.201.12.1); --- Added "Programmable Medical Electrical System (PEMS)" (see.201.14); --- Added "ME system" (see.201.16); --- Added "Examples of surface temperature measurement arrangements for external transducer components" (see Appendix BB). This part uses the redrafting law to amend and adopt IEC 60601-2-5.2009 "Medical Electrical Equipment Part 2-5.Ultrasonic Physical Therapy Equipment Specific requirements for basic safety and basic performance. The technical differences between this part and IEC 60601-2-5.2009 and the reasons are as follows. ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in the chapter "Normative Reference Documents", and the specific adjustments are as follows. ● Removed IEC 60601-1-2.2007 (see.201.2). This section also made the following editorial changes. --- Deleted the "index of defined terms". Please note that certain contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part is proposed and managed by the State Drug Administration. The previous releases of the standards replaced by this part are. ---GB 6386-1986; ---GB 9706.7-1994, GB 9706.7-2008.IntroductionThis special standard specifies additional safety and performance requirements for ultrasonic physical therapy equipment on the basis of the general standard. This special standard considers the content of YY/T 0750-2009. The requirements follow the relevant test specifications. For important requirements in Appendix AA, the principle description is given when necessary. Understanding the reasons for these requirements will not only help The use of this special standard can also speed up any necessary revisions to the standard in a timely manner based on changes in clinical practice or the results of technological development. But the appendix is not part of the standard requirements. Chapters and articles with principle descriptions are marked with an asterisk (*) in the upper corner after the clause number. Medical electrical equipment Part 2-5.Ultrasound physical therapy equipment Special requirements for basic safety and basic performance 201.1 Scope, purpose and related standards In addition to the following, Chapter 1 of the general standard applies. 201.1.1 Scope Substitute. This section applies to the basic safety and basic performance of ultrasound physiotherapy equipment defined in.201.316.Hereinafter referred to as ME equipment. This section only relates to ultrasonic physiotherapy equipment that uses a single plane non-focusing circular transducer as the treatment head, and the static sound beam generated by it is vertical. Straight to the end face of the treatment head. This part also applies to ultrasound physiotherapy equipment that compensates or relieves disease, injury or disability. In the case of a combined device (for example, the device has an additional function or application part of electrical stimulation), this type of device should also comply with the added Add the provisions of the special standards involved in the functional safety requirements. If the chapter or article is specifically expected to apply only to ME equipment, or only to ME systems, it is stated in the title and content of the chapter or article Bright. If no instructions are given, the chapter or article is applicable to ME equipment and ME systems. The inherent hazards in the expected physiological functions of ME equipment or ME systems within the scope of this part, except for the general standards 7.2.13 and 8.4.1 In addition, it is not included in the special requirements of this section. Note. See 4.2 of the general standard. This specific standard does not apply to. ---Using ultrasonic-driven equipment (for example, equipment used in surgery and dentistry); ---Using focused ultrasound pulse waves to crush condensate such as kidney or bladder stones (lithography machine) (see GB 9706.22); ---Using focused ultrasound ultrasound physiotherapy equipment. 201.1.2 Purpose Substitute. The purpose of this special standard is to specify the basic safety and basic performance requirements of ultrasound physiotherapy equipment as defined in.201.316. 201.1.3 Parallel standards increase. The applicable parallel standards involved in this special standard are listed in Chapter 2 of the general standard and.201.2 of this special standard. YY0505 applies after revising Chapter 202, and all other published parallel standards in the GB 9706 series adopt its latest version. 201.1.4 Specific standards Substitute. In the GB 9706 series, as long as it is applicable to specific ME equipment, the specific standards can modify, replace or delete the requirements in the general standards. Requirements, other basic safety and basic performance requirements can also be added. The requirements of specific standards take precedence over general standards. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 9706.205-2020_English be delivered?Answer: Upon your order, we will start to translate GB 9706.205-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 9706.205-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB 9706.205-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
