GBZ40213-2021 English PDFUS$1104.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GBZ40213-2021: Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling Status: Valid
Basic dataStandard ID: GB/Z 40213-2021 (GB/Z40213-2021)Description (Translated English): Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling Sector / Industry: National Standard Classification of Chinese Standard: N10 Word Count Estimation: 58,529 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GBZ40213-2021: Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. GB /Z 40213-2021 Automation systems and integration-Applications integration approach using information exchange requirements modelling and software capability profiling ICS 25.040.01 CCSN10 National Standardization Guiding Technical Documents of the People's Republic of China Automation system and integration based on information exchange requirements Application integration method of modeling and software capability establishment (ISO /T R18161.2013, IDT) Released on 2021-05-21 2021-12-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Abbreviations 2 5 Application Interoperability Requirements Modeling 3 5.1 ISO 15745 and ISO 18435 application integration framework 3 5.2 ISO 18435 Information Exchange Elements 3 5.3 Context of information exchange requirements 4 5.4 Contents of information exchange requirements 5 5.5 Transmission of information exchange 6 5.6 Smart pump application ADME 6 6 Interoperability methods for smart pump applications 7 6.1 Intelligent pump system information model 7 6.2 Using OTD to resolve ambiguity 8 6.3 Application integration using ISO 18435 8 7 Build AIME and ADME for smart pump applications 8 7.1 Overview 8 7.2 AIME 8 for pump control applications 7.3 AIME 9 for pump diagnostic applications 7.4 ADME 9 with integrated smart pump application 8 General steps to achieve application integration 9 Appendix A (informative) Intelligent pump application modeling 11 Appendix B (Informative) Capacity Building Scale of Application Software Unit 13 Appendix C (Informative) Application Software Unit Capability Specifications 39 Appendix D (informative) AIME and ADME used in smart pumps 44 References 52ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document uses the translation method equivalent to adopting ISO /T R18161.2013 "Automation System and Integration Based on Information Exchange Demand Modeling and Application Integration Methods for Software Capability Building Regulations. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Automation System and Integration Standardization Technical Committee (SAC/TC159). The drafting units of this document are. Beijing Machinery Industry Automation Research Institute Co., Ltd. and Tongkun Group Co., Ltd. The main drafters of this document. Wang Haidan, Nie Zilin, Li Xiaodong, Xu Yanhui.IntroductionThe motivation for ISO 16100 comes from the industrial and economic environment, especially. a) The growth foundation of vendor-specific solutions; b) Difficulties of users in applying standards; c) Need to transform into a modular system integration tool set; d) Recognize that the application software and the expertise to apply the software are the assets of the enterprise. ISO 16100 is an international standard for expressing computer-understandable and human-readable capabilities. The goal is to provide a Independent of the specific system architecture or implementation platform method, used to represent the manufacturing application software for its entire manufacturing application life cycle The ability to play a role. This can reduce production and information management costs for users and suppliers/suppliers of manufacturing applications. ISO 18435 provides a framework for uniform use of industry and international standards to integrate control, diagnosis, prediction, capability assessment and maintenance application. By using the ISO 15745 application integration modeling method, key interoperability interfaces can be identified and briefly based on the configuration file write it down. ISO 18435 also provides elements and rules to describe the integration requirements of automation applications. These elements include combining automation applications with The key aspects of his application integration, and the relationship between these key aspects. The rules include information exchange to support in-app as well as in-app Interoperability between. This document describes use cases for modeling smart pump applications in Appendix A. The manufacturing software unit is described in detail in Appendix B Build a scale board. The specific regulations for manufacturing software units are described in detail in Appendix C. Appendix D describes the intelligence based on the ISO 18435 methodology. Can pump information exchanged between manufacturing software units in the application. Automation system and integration based on information exchange requirements Application integration method of modeling and software capability establishment1 ScopeThis document describes the use of ISO 16100 and ISO 18435 to specify the information exchange requirements between applications. The method is based on ISO 18435 Application Interaction Matrix Element (AIME)/Application Area Matrix Element (ADME) template and ISO 16100 manufacturing software sheet Meta (MSU) capability model. This document also gives an example of a method to describe the interoperability requirements of integrated smart pump applications, including pump control applications and pump diagnostics. Application.2 Normative referencesThe contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 19902.3-2006 Industrial Automation System and Integrated Manufacturing Software Interoperability Building Regulations Part 3.Interface Service Service, agreement and capability template (ISO 16100-3.2005, IDT) GB/T 19902.5-2011 Industrial Automation System and Integrated Manufacturing Software Interoperability Building Regulations Part 5.Based on multiple Methodology for specific matching of competency structure (ISO 16100-5.2009, IDT) GB/T 27758.2-2015 Industrial Automation System and Integrated Diagnostics, Capability Assessment and Maintenance Application Integration Part 2. Description and definition of application field matrix elements (ISO 18435-2.2012, IDT)3 Terms and definitionsGB/T 19902.3-2006, GB/T 19902.5-2011 and GB/T 27758.2-2015 and the following terms and definitions Applies to this document. 3.1 Application domain matrix element applicationdomainmatrixelement;ADME An entry in the application domain matrix is used to organize the exchange of information between applications. [Source. GB/T 27758.2-2015, 3.2] 3.2 Application interaction matrix element; AIME An entry in the application interaction matrix is used to indicate the resource capability to support information exchange. [Source. GB/T 27758.2-2015, 3.4] 3.3 Application Interoperability ProfileAIP A single specification that refers to a set of special rules, and this group of special rules refers to a part of the basic norms that can be special rules themselves. Note. The special rules group can include special rules for process, special rules for information exchange, special rules for resources, and other application interoperability special rules (AIP). [Source. GB/T 27758.2-2015, 3.5] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ40213-2021_English be delivered?Answer: Upon your order, we will start to translate GBZ40213-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GBZ40213-2021_English with my colleagues?Answer: Yes. The purchased PDF of GBZ40213-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
