GBZ29626-2013 English PDF
Basic dataStandard ID: GB/Z 29626-2013 (GB/Z29626-2013)Description (Translated English): Guide of on-line monitoring system for turbine-generators Sector / Industry: National Standard Classification of Chinese Standard: K52 Classification of International Standard: 29.160.40 Word Count Estimation: 34,322 Quoted Standard: GB/T 191; GB/T 2423.1; GB/T 2423.2; GB/T 2423.4; GB/T 2423.10; GB 3836.1; GB/T 4798.1; GB/T 4798.2; GB/T 17626.2; GB/T 17626.3; GB/T 17626.4; GB/T 17626.5; GB/T 17626.8; GB/T 17799.2; GB/T 17799.4 Regulation (derived from): National Standards Bulletin 2013 No. 10 Issuing agency(ies): Ministry of Health of the People's Republic of China Summary: This standard specifies: turbo-generator line Monitoring System for a variety of devices basic technical conditions, general requirements, reliability requirements, acceptance of technical conditions, the design principle of selection, communication proto GBZ29626-2013: Guide of on-line monitoring system for turbine-generators---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guide of on-line monitoring system for turbine-generators ICS 29.160.40 K52 People's Republic of China national standardization of technical guidance documents Turbine status online monitoring system Application Guidelines 2013-07-19 released 2013-12-02 Implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 online monitoring general requirements 3 5 Turbine Generator Online Monitoring Project 4 6 online monitoring system inspection, acceptance and verification 6 7 logo, packaging, transportation and storage 7 Completeness of supply 8 Appendix A (Informative) Generator fault location and features 9 Appendix B (Informative) Turbine - generator stator winding end vibration monitoring system Appendix C (informative) Partial discharge online monitoring 13 Appendix D (Informative) Turbine Rotor On-line Short-circuit Monitoring 18 Appendix E (Informative) Insulation over-temperature alarm 22 Appendix F (Informative) Turbine Generator Shaft Torsional Vibration Online Monitoring System 25 ForewordThis instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009. This guidance document is proposed by China Electrical Equipment Industry Association. This guidance document is organized by the National Large Scale Generator Standardization Technical Committee (SAC/TC511). The main drafting of the technical guidance of this document. Shandong Electric Power Research Institute, North China Electric Power Research Institute Co., Ltd., East China Electric Power Experimental Research Institute Co., Ltd., Harbin Institute of Electrical Engineers, Liaoning Provincial Electric Power Co., Ltd. Electric Power Research Institute, Anhui Electric Power Research Institute Institute, Guangdong Yuedian Group Co., Ltd. The guidance of technical documents to participate in the drafting unit. Beijing North Heavy Turbine Co., Ltd., Shandong Qilu Electric Manufacturing Co., Ltd., Dongfang Electric Co., Ltd., Shanghai Electric Power Station Equipment Co., Ltd., Beijing Sifang Automation Co., Ltd., Shanghai Jiaotong University, North Jinghua Branch Tongan Monitoring Technology Co., Ltd., Guangzhou Hao Electric Automation Co., Ltd., Shanghai Habitat Technology Co., Ltd., Germany (Shandong) Electric Force limited technology division. The main drafters of this technical document are Sun Shumin, Bai Yamin, Bai Kai, Li Fuxing, Sun Yutian, Wang Jianjun, Sheng Mingjun, Ye Guohua, Wang Anton, Cao Zhiwei, Cheng Yan. The guidance of technical documents to participate in the drafters. Zhuge Wenbing, Zhang Zhonghai, Wang Yong, Liu Mingxing, Tian Jian, Jiang Xiuchen, Zhu Yuliang, He Wenwei, Guo Weiqin, Bai Xueyan, Zhou Hang.IntroductionWith the increase of generators' stand-alone capacity, the impact of large generator faults on power generation companies and power grids is increasing. In order to be shipped Line monitoring the status of the generator, the generator may predict the failure and monitor the development process, all kinds of on-line monitoring device in the turbine power The machine has been promoted and applied. At present, most of the generator online monitoring equipment in addition to manufacturers standards there is no uniform standard can be based. user, Design department, manufacturing department of the generator monitoring system may exist different understanding and misunderstanding, the generator online monitoring equipment performance Parameters, measurement methods are not uniform, the reliability of monitoring equipment, monitoring sensitivity difference is not conducive to the formation of a unified criterion, it is difficult to Guiding the operation and maintenance of the generator by the ground led to the extension of many of the equipment failures that could have been discovered and avoided in advance to even recurrences. The purpose of this guidance document is to guide the selection, design, installation and operation of generator monitoring equipment. Turbine status online monitoring system Application Guidelines1 ScopeThis Guidance Document stipulates the basic technical conditions, requirements and reliability of various devices for on-line monitoring system of steam turbine condition Sexual requirements, acceptance of technical conditions, design selection principles, communication protocols and power plant distributed control system DCS (DistributedControlSys- tem) connection requirements. This Guidance Document is applicable to Turbine Generator Online Monitoring System (hereinafter referred to as Monitoring System).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD) GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature (GB/T 2423.1- 2008, IEC 60068-2-1.2007, IDT) GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature (GB/T 2423.2- 2008, IEC 60068-2-2.2007, IDT) GB/T 2423.4 Environmental testing for electric and electronic products Part 4. Test methods Test Db. Alternating hot and humid (12h 12h cycle Ring) (GB/T 2423.4-2008, IEC 60068-2-30.2005, IDT) GB/T 2423.10 Environmental testing for electric and electronic products Part 10. Test Fc. Vibration (sinusoidal) (GB/T 2423.10- 2008, IEC 60068-2-6.1995, IDT) GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment (GB 3836.1-2010, IEC 60079-0.2007, MOD) GB/T 4798.1 electrical and electronic product application environmental conditions Part 1. Storage (GB/T 4798.1-2005, IEC 60721-3- 1.1997, MOD) GB/T 4798.2 electrical and electronic products application environmental conditions Part 2. Transport (GB/T 4798.2-2008, IEC 60721-3-2.1997, MOD) GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test (GB/T 17626.2-2006, IEC 61000-4-2.2001, IDT) GB/T 17626.3 Electromagnetic compatibility test and measurement techniques RF electromagnetic radiation immunity test (GB/T 17626.3- 2006, IEC 61000-4-3.2002, IDT) GB/T 17626.4 Electromagnetic compatibility test and measurement techniques Electrical fast transient burst immunity test (GB/T 17626.4- 2008, IEC 61000-4-4.2004, IDT) GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626.5-2008, IEC 61000-4-5.2005, IDT) GB/T 17626.8 Electromagnetic compatibility test and measurement techniques Frequency magnetic field immunity test (GB/T 17626.8-2006, IEC 61000-4-8.2001, IDT) GB/T 17799.2 common standard electromagnetic compatibility Immunity test in industrial environments (GB/T 17799.2-2003, ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ29626-2013_English be delivered?Answer: Upon your order, we will start to translate GBZ29626-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GBZ29626-2013_English with my colleagues?Answer: Yes. The purchased PDF of GBZ29626-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
