GBZ18029.10-2021 English PDF

US$204.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ18029.10-2021: Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/Z 18029.10-2021	204	Add to Cart	3 days	Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs	Valid

Similar standards

GB 17761   GB 17761   GB/T 12996   GB/T 18029.6   GB/T 18029.8   GB/T 18029.1   

Basic data

Standard ID: GB/Z 18029.10-2021 (GB/Z18029.10-2021)
Description (Translated English): Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
Sector / Industry: National Standard
Classification of Chinese Standard: Y14
Word Count Estimation: 10,126
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GBZ18029.10-2021: Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 18029:10-2021 Wheelchairs -- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs ICS 11:180 CCSY14 National Standardization Guiding Technical Document of the People's Republic of China Replacing GB/T 18029:10-2009 Wheelchair Part 10: Determination of obstacle-surmounting ability of electric wheelchair (ISO 7176-10:2008, IDT) Published on 2021-12-31 2021-12-31 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 1 5 Test Facility 1 6 Prepare the wheelchair to be tested 2 7 Test Step 3 8 Inspection report 4 9 Information Release 5

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 10 of GB/T 18029 "Wheelchair Vehicles": GB/T 18029 has released the following parts: --- Part 1: Determination of static stability; --- Part 2: Determination of dynamic stability of electric wheelchairs; --- Part 3: Determination of braking performance; --- Part 4: Determination of theoretical energy consumption of electric wheelchairs and electric scooters; --- Part 5: Determination of dimensions, mass and operating space; --- Part 6: Determination of the maximum speed, acceleration and deceleration of electric wheelchairs; --- Part 7: Measurement of seat and wheel dimensions; --- Part 8: Requirements and test methods for static strength, impact strength and fatigue strength; --- Part 9: Electric wheelchair climatic test method; --- Part 10: Determination of the obstacle-surmounting ability of electric wheelchairs; --- Part 11: Test dummies; --- Part 13: Determination of the coefficient of friction of the test surface; --- Part 14: Requirements and test methods for power and control systems for electric wheelchairs and electric scooters; --- Part 15: Requirements for information release, document issuance and identification; --- Part 16: Flame retardancy of postural fixation devices; --- Part 19: Wheeled mobile devices that can be used as motor vehicle seats; --- Part 21: Electromagnetic compatibility requirements and test methods for electric wheelchairs, electric scooters and battery chargers; --- Part 22: Adjustment procedures; --- Part 26: Terminology; --- Part 28: Requirements and test methods for stair climbing appliances: This document replaces GB/T 18029:10-2009 "Wheelchairs - Part 10: Determination of the ability of electric wheelchairs to overcome obstacles", and Compared with GB/T 18029:10-2009, in addition to structural adjustment and editorial changes, the main technical changes are as follows: --- Added requirements and test methods for wheelchair vehicles to approach obstacles (see 7:3); --- Changed the height of the test obstacle, from the original 20mm~200mm to 10mm~200mm, and increased the increase of each level: The amount is changed from 20mm to 5mm (see 5:2, 5:2 of the:2009 edition); --- Increase the measurement provisions for the starting distance for obstacle crossing and illustrate with diagrams (see 7:4); --- Added test methods for wheelchairs equipped with devices intended by the manufacturer to climb obstacles (see 7:8); --- Added the requirements for releasing test results in accordance with the provisions of GB/T 18029:15 (see Chapter 9): This document is equivalent to ISO 7176-10:2008 "Wheelchairs - Part 10: Determination of the obstacle-surmounting ability of electric wheelchairs", document type The ISO standard is adjusted to my country's guiding technical document: Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the Ministry of Civil Affairs of the People's Republic of China: This document is under the jurisdiction of the National Technical Committee on Standardization of Rehabilitation and Special Equipment for Persons with Disabilities (SAC/TC148): This document is drafted by: National Research Center for Rehabilitation Aids, National Center for Quality Supervision and Inspection of Rehabilitation Aids, Foshan Quality and Standardization Research Institute, Shanghai Hubang Intelligent Rehabilitation Equipment Co:, Ltd:, Shanghai Rehabilitation Equipment Association, Foshan Dongfang Medical Equipment Factory Co:, Ltd: The main drafters of this document: Gu Huiru, Zhang Weikang, Yan Heping, Shan Xinxin, Zhao Cishun, Xu Zuyi, Zhao Jianrong, Yan Wei, Wu Sainan, Gong Qing: The previous versions of the documents replaced by this document are as follows: ---First released in:2009 as GB/T 18029:10-2009; ---This is the first revision:

Introduction

According to the document user principle, GB/T 18029 "Wheelchair Vehicles" stipulates that wheelchair users, manufacturers, testing institutions and other relevant parties should pay attention requirements for the design, performance, testing, infrastructure, and information release of wheelchair vehicles: GB/T 18029 is intended to consist of 22 parts: --- Part 1: Determination of static stability; --- Part 2: Determination of dynamic stability of electric wheelchairs; --- Part 3: Determination of braking performance; --- Part 4: Determination of theoretical energy consumption of electric wheelchairs and electric scooters; --- Part 5: Determination of dimensions, mass and operating space; --- Part 6: Determination of the maximum speed, acceleration and deceleration of electric wheelchairs; --- Part 7: Measurement of seat and wheel dimensions; --- Part 8: Requirements and test methods for static strength, impact strength and fatigue strength; --- Part 9: Electric wheelchair climatic test method; --- Part 10: Determination of the obstacle-surmounting ability of electric wheelchairs; --- Part 11: Test dummies; --- Part 13: Determination of the coefficient of friction of the test surface; --- Part 14: Requirements and test methods for power and control systems for electric wheelchairs and electric scooters; --- Part 15: Requirements for information release, document issuance and identification; --- Part 16: Flame retardancy of postural fixation devices; --- Part 19: Wheeled mobile devices that can be used as motor vehicle seats; --- Part 21: Electromagnetic compatibility requirements and test methods for electric wheelchairs, electric scooters and battery chargers; --- Part 22: Adjustment procedures; --- Part 25: Batteries and chargers for electric wheelchairs; --- Part 26: Terminology; --- Part 28: Requirements and test methods for stair climbing appliances; --- Part 30: Wheelchair test methods and requirements for changing the occupant's posture: Among them, Part 26 is the term; Part 11, Part 13 stipulates the infrastructure requirements for wheelchair testing; Part 22 stipulates Sets test preparation requirements; Part 15 sets out information release requirements; Parts 1, 3, 5, 7, 8 Part, Part 10, Part 16 specifies the general requirements and test methods for all wheelchairs (including manual and electric); Part 2, Part 4, Part 6, Part 9, Part 14, Part 21, Part 25 set out the requirements and Test methods; Parts 19, 28, and 30 specify requirements for special functional wheelchairs: When choosing the most suitable wheelchair for the user considering the range and safety of the wheelchair accessible passage, the electric wheelchair climbs The ability to (up and down) obstacles is a crucial factor: Wheelchair capacity may be affected by its ability to safely pass obstacles, such as thresholds, changes in the height of the road surface and the edge of the pavement: Stone etc: The wheelchair's ability to drive up the height of an obstacle is different from its ability to get off the obstacle: However, how high an obstacle can a wheelchair climb? Obstacles and how high they can get off are important to users and prescribers: The ability of the wheelchair to climb (up and down) obstacles is also related to The technique of operating the wheelchair is also related to changing the mode of operation (such as four-wheel drive): This document specifies a uniform method for determining the ability of electric wheelchairs to climb (up and down) obstacles in order to obtain comparable results: Wheelchair Part 10: Determination of obstacle-surmounting ability of electric wheelchair

1 Scope

This document describes the climbing (top, Bottom) Methods of measuring obstacle capability:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: ISO 7176-11 Wheelchairs - Part 11: Test dummies (Wheelchairs-Part 11: Testdummies) Note: GB /Z 18029:11-2021 Wheelchair Part 11: Dummy for testing (ISO 7176-11:2012, IDT) ISO 7176-13 Wheelchair Part 13: Determination of the coefficient of friction of test surfaces (Wheelchair-Part 13: Determinationofcoefficientoffrictionoftestsurfaces) Note: GB/T 18029:13-2008 Wheelchair Part 13: Determination of the coefficient of friction of the test surface (ISO 7176-13:1989, IDT) ISO 7176-15 Wheelchairs Part 15: Requirements for information release, documentation and marking (Wheelchairs-Part 15:Re- requirementsforinformationdisclosure,documentationandlabeling) Note: GB/T 18029:15-2008 Wheelchair Part 15: Requirements for Information Release, Document Issuance and Marking (ISO 7176-15:1996, IDT) ISO 7176-22 Wheelchairs - Part 22: Adjustment procedures (Wheelchairs-Part 22:Set-upprocedures) Note: GB/T 18029:22-2009 Wheelchairs - Part 22: Adjustment Procedures (ISO 7176-22:2000, IDT) ISO 7176-26 Wheelchairs - Part 26: Terminology (Wheelchairs-Part 26: Vocabulary) Note: GB/T 18029:26-2014 Wheelchair Part 26: Terminology (ISO 7176-26:2007, IDT)

3 Terms and Definitions

Terms and definitions defined in ISO 7176-26 apply to this document:

4 Principles

Tests are used to measure the ability of an electric wheelchair to climb over obstacles such as sidewalk curbs and steps:

5 Testing Facilities

5:1 Test Platform For hard platforms, the flatness error should be less than 5mm, the horizontal error should be less than ±0:5°, and the surface friction coefficient should comply with ISO 7176- 13 provisions: Note: The test platform can accommodate obstacles as specified in 5:2 and there is enough space to place the test wheelchair at a distance of 0:5m from the obstacle: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GBZ18029.10-2021_English be delivered?

Answer: Upon your order, we will start to translate GBZ18029.10-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GBZ18029.10-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GBZ18029.10-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.