GB/T 967-2008 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 967-2008: Nut taps
Status: Valid

GB/T 967: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 967-2008	209	Add to Cart	3 days	Nut taps	Valid
GB/T 967-1994	399	Add to Cart	3 days	Nut taps	Obsolete
GB 967-1983	199	Add to Cart	2 days	Short shank nut taps	Obsolete

Similar standards

GB/T 33524.2   GB/T 972   GB/T 5104   GB/T 970.2   GB/T 971   GB/T 970.1   

Basic data

Standard ID: GB/T 967-2008 (GB/T967-2008)
Description (Translated English): Nut taps
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.50
Word Count Estimation: 9,994
Date of Issue: 2008-06-03
Date of Implementation: 2009-01-01
Older Standard (superseded by this standard): GB/T 967-1994
Quoted Standard: GB/T 192; GB/T 193; GB/T 196; GB/T 197; GB/T 968; GB/T 969
Regulation (derived from): National Standard Approval Announcement 2008 No.9 (Total No.122)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the type of nut tap, dimensions, thread tolerance, technical requirements and other basic requirements. This standard applies to the processing of ordinary screw nut taps.

GB/T 967-2008: Nut taps

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Nut taps ICS 25.100.50 J41 National Standards of People's Republic of China Replacing GB/T 967-1994 Nut taps Posted 2008-06-03 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 967-1994 "Nut Taps." The standards are compared with the GB/T 967-1994 changes as follows. --- Added "foreword"; --- Tag example, the left-hand thread by the symbol "L" to "LH"; --- Tag example, the "spiral" to "thread"; --- According to GB/T 1.1-2000 made editorial changes. The standard proposed by the China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu into a tool Limited. The main drafters of this standard. new Huang Hua, Xiong Jian. The standard standard replaces the previous editions. --- GB 967-1983, GB/T 967-1994. Nut taps

1 Scope

This standard specifies the basic requirements nut tap type, size, thread tolerances, and other technical requirements. This standard applies to the processing of common screw (GB/T 192 ~ 193, GB/T 196 ~ 197) Taps nut.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 192 ordinary screw threads - Basic model (GB/T 192-2003, ISO 68-1.1998, MOD) GB/T 193 series common thread diameter and pitch (GB/T 193-2003, ISO 261.1998, MOD) GB/T 196 common thread basic size (GB/T 196-2003, ISO 724.1993, MOD) GB/T 197 common thread tolerance (GB/T 197-2003, ISO 965-1.1998, MOD) GB/T 968 tap thread tolerance (GB/T 968-2007, ISO 2857. 1973, MOD) GB/T 969 Taps technical conditions (GB/T 969-2007, ISO 8830.1991, MOD)

3 Taps type and size

Type shown in Figure 1, the size in Tables 1 and 2 below. Figure 1 Code Nominal diameter Pitch M2 2 M2.2 2.2 M2.5 2.5 0.4 0.45 1.4 1.6 1.8 M3 3 0.5 40 15 12 2.24 M3.5 3.5 0.6 45 18 14 2.5 M4 4 0.7 50 21 16 3.15 M5 5 0.8 55 24 19 4 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 967-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 967-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 967-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 967-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 967-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 967-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.