GB/T 9254.1-2021 PDF EnglishUS$1235.00 · In stock · Download in 9 seconds
GB/T 9254.1-2021: Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 9254.1: Historical versions
Similar standardsGB/T 9254.1-2021: Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9254.1-2021 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 33.100.10 CCS L 06 Replacing GB/T 9254-2008, GB/T 13837-2012 Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1. Emission requirements (CISPR 32.2015, Electromagnetic compatibility of multimedia equipment - Emission requirements, MOD) Issued on: DECEMBER 31, 2021 Implemented on: JULY 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 4 Introduction... 9 1 Scope... 10 2 Normative references... 10 3 Terms, definitions and abbreviations... 11 3.1 Terms and definitions... 11 3.2 Abbreviations... 16 4 Classification of equipment... 19 5 Requirements... 19 6 Measurements... 20 6.1 General... 20 6.2 Host systems and modular EUT... 20 6.3 Measurement procedure... 22 7 Equipment documentation... 22 8 Applicability... 23 9 Test report... 23 10 Compliance... 25 11 Measurement uncertainty... 25 Annex A (normative) Requirements... 26 A.1 General... 26 A.2 Requirements for radiated emissions... 27 A.3 Requirements for conducted emissions... 32 Annex B (normative) Exercising the EUT during measurement and test signal specifications... 37 B.1 General... 37 B.2 Exercising of EUT ports... 37 Annex C (normative) Measurement procedures, instrumentation and supporting information... 42 C.1 General... 42 C.2 Instrumentation and supporting information... 42 C.3 General measurement procedures... 45 C.4 Related measurement procedures... 49 Annex D (normative) Arrangement of EUT, local AE and associated cabling... 60ForewordThis document was drafted in accordance with the rules given in GB/T 1.1-2020 “Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents”. This document is Part 1 of GB/T 9254 “Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility”. The following parts of GB/T 9254 have been issued. - Part 1.Emission requirements; - Part 2.Immunity requirements. This document replaces GB/T 9254-2008 “Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement” and GB/T 13837- 2012 “Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement”. This document integrates the technical content of GB/T 9254-2008 and GB/T 13837-2012.Compared with the above two documents, except for structural adjustment and editorial changes, the main technical changes are as follows. - The scope of application is wider. It is suitable for multimedia equipment, including multimedia equipment for professional use and equipment applicable to GB/T 9254-2008 and GB/T 13837-2012; - Change the warning words in the description of Class A equipment requirements (see Chapter 7 of this document, 4.2 of GB/T 9254-2008); - Change boundary definitions for EUT, AE and associated cables in radiated emission measurements (see C.2.2.4 of this document, 10.3.1 of GB/T 9254-2008); - Delete the chapter of "Explanation of CISPR harassment limits" (See Chapter 7 of GB/T 9254-2008 and Chapter 6 of GB/T 13837-2012); - Delete the requirements for disturbance power test items (see 4.5 and 5.6 of GB/T 13837-2012); - Delete the requirements for the measurement limit of radiation power of the tuning unit of the direct-to-home satellite receiver (see 4.7 of GB/T 13837-2012); - Delete the requirements for the measurement limit of equivalent radiated power in the radiated power of the outdoor unit of the direct-to-home satellite receiver (see 4.7 of GB/T 13837-2012); - Delete the requirements for RMS-average detector measurement (see Chapter 4 of GB/T 13837-2012); - Add the limit requirements and measurement procedures for asymmetric mode conducted emissions using a combination of current probes and CVP (see Table clauses A11.2 and A12.2 and C.4.1.6.4 of this document); - For the radiated emission measurement requirements below 1GHz, add the limit of 3m measurement distance in OATS/SAC and the limit of 3m measurement distance and 10m measurement distance in FAR/FSOATS (see A.2 of this document); - Add the limits and test methods for radiated emission testing in GTEM and RVC (see Annex I of this document). The revision of this document adopts CISPR 32.2015 “Electromagnetic compatibility of multimedia equipment - Emission requirements”. This document is structurally consistent with CISPR 32.2015.The main technical differences are as follows. - According to the principle that CISPR product standards use CISPR basic standards as references in principle, change "ANSI C63.5-2006" in normative references and "ANSI C63.5" in C.2.2.2 to "GB/T 6113.106-2018"; - Delete the definition of 3.1.15 EUT. Add it as an abbreviation in 3.2; - Since the content involves the host unit, add the definition of 3.1.18 “host unit”; - According to the broadcast signal system in China, delete the relevant abbreviations AC-3, ATSC, BPSK, DMB-T, DQPSK, ISDB, ISDB-S, MPEG, OFDM applicable to other countries and regions. Add abbreviations DTMB, DVB-S/S2; - Since China has a relatively common rated voltage, delete the description that “Measurement at two nominal voltages of 230 V (±10 V) and 110 V (±10 V), using a frequency of 50 Hz or 60 Hz, is normally sufficient for an EUT intended for worldwide use” in “The measurements shall be limited to.” in Annex A of CISPR 32.2015; - In Table A.2 ~ Table A.6, Table A.9 ~ Table A.10 and Table A.13, add relevant instructions that "Tighter limits shall be applied at transition frequencies", so as to make the limit requirements clearer; - In Table A.2, Table A.4, Table A.6, Table A.10, Table A.11 and Table A.12, add relevant instructions that "The limit decreases linearly with the logarithm of the frequency", so as to make the limit requirements clearer; - According to the scope of application of the document, MODIFY the relevant contents that “AC mains ports that also have the function of a wired network port shall meet the limits given in Table A.9” in Table A.11 of CISPR 32.2015 TO “The AC power port with wired network port function (such as. power line communication function) shall meet the limits given in Table A.9 when network Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1. Emission requirements1 ScopeThis document applies to information technology equipment (3.1.19) whose rated AC voltage RMS or DC voltage does not exceed 600 V, audio equipment (3.1.6), video equipment (3.1.31), broadcast receiver equipment (3.1.7), entertainment lighting control equipment (3.1.14) and combinations thereof. This document also applies to the above-mentioned equipment for professional use. The emission requirements specified in this document do not apply to intentional emissions from radio transmitters as defined by the ITU. Nor does it apply to spurious emissions associated with these intentional emissions.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6113.104-2016, Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4.Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (CISPR16-1-4.2012, IDT) GB/T 6113.106-2018, Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6.Radio disturbance and immunity measuring apparatus - EMC antenna calibration (CISPR16-1-6.2014, IDT)3 Terms, definitions and abbreviations3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 AC mains power port port used to connect to the mains supply network 3.1.2 analogue/digital data port signal/control port (3.1.30), antenna port (3.1.3), wired network port (3.1.32), broadcast receiver tuner port (3.1.8), or optical fibre port (3.1.25) with metallic shielding and/or metallic strain relief member(s)4 Classification of equipmentThis document defines Class A and Class B equipment according to two end-use environments. Class A equipment is equipment which meets the requirements given in Table A.2, Table A.3, Table A.9, and Table A.11, using the limitations defined in Table A.1 and Table A.8. Class B equipment is equipment which meets the requirements given in Table A.4, Table A.5, Table A.6, Table A.7, Table A.10, Table A.12 and Table A.13, using the limitations defined in Table A.1 and Table A.8.5 RequirementsThe requirements for equipment covered within the scope of this document are defined in Annex A.6 Measurements6.1 General Chapter 6 specifies measurement facilities and instruments for EUT emission measurements, including the relevant basic requirements given in the GB/T 6113 (CISPR 16) series of standards and other standards. It also specifies how to configure and route the EUT, local AE and associated cables. The relevant measurement procedures are provided. The specification of the measurement facility, measurement equipment, procedures, and the arrangement of the measurement equipment to be used are given in the basic standards referred to in the tables in Annex A. Unless otherwise specified, the basic standards shall be used for all aspects of the measurement. 6.2 Host systems and modular EUT The following mainly describes how to configure the host system or modular EUT. Modular systems can comprise different types of module(s), for example the EUT can be. - an external module, for example an infra-red remote control; - an internal module, for example a computer hard disk; - a plug-in module, for example a memory stick; - a mounted module, for example a sound card or a video card.7 Equipment documentationThe user documentation and/or manual shall contain details of any special measures required to be taken by the purchaser or user to ensure EMC compliance of the EUT with the requirements of this document. One example would be the need to use shielded or special cables, such as category 5 F/UTP or category 6 U/UTP cabling as defined in ISO/IEC 11801. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 9254.1-2021 be delivered?Answer: The full copy PDF of English version of GB/T 9254.1-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 9254.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9254.1-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 9254.1-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 9254.1-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9254.1-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 9254.1-2021?A step-by-step guide to download PDF of GB/T 9254.1-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 9254.1-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
