GB/T 9088-2008 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9088-2008: Organization method for electric tools
Status: Valid

GB/T 9088: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9088-2008	329	Add to Cart	3 days	Organization method for electric tools	Valid
GB/T 9088-1988	559	Add to Cart	4 days	Types organization method for electric tools	Obsolete

Similar standards

GB/T 4343.2   GB/T 3883.311   GB/T 3787   GB/T 9536.1   GB/T 3883.217   GB/T 3883.208   

Basic data

Standard ID: GB/T 9088-2008 (GB/T9088-2008)
Description (Translated English): Organization method for electric tools
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K64
Classification of International Standard: 25.140.20
Word Count Estimation: 14,127
Date of Issue: 2008-04-24
Date of Implementation: 2008-12-01
Older Standard (superseded by this standard): GB/T 9088-1988
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2008 (total 119)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the handheld and portable electric tools and components for the model principles. Where power tools and assembly model of the AC power tools in Appendix A of this standard model application Measures, by the design unit to the power tool Model Management unit application, after due by issuing valid.

GB/T 9088-2008: Organization method for electric tools

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Organization method for electric tools ICS 25.140.20 K64 National Standards of People's Republic of China Replacing GB/T 9088-1988 Establishment method of electric tools Posted 2008-04-24 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Definitions 1 2.1 Power Tools Model methodology 1 2.2 Establishment method of electric tool assembly 5 2.3 Manufacturer components not covered by product type and model preparation 7 Appendix A (informative) Model to Apply Power Tools 8

Foreword

Since the implementation of this standard replaces GB/T 9088-1988 "power tool model designation." This standard and GB/T 9088-1988 compared to the major technical modifications include. In Table 1, the power tool to delete the name of the category and class railway, increase gardening; metal cutting reciprocating saw increases class, beveling machine, song Wire saw, miter - Combined Saw; increase in a sand mold type grinders, bench grinders, vertical disc grinder, disc grinder vertical reciprocating sander Or polishing machine, trackless irregular circular motion sanding machine or polishing machine; assembly class adds impact wrench; increasing insertion forest type circular saw, Thickness planing, radial arm saws, planer; farming class Remove electric grass trimmer, electric mower; road construction category increased diamond drilling, plug-in concrete vibrator Actuators, sleepers hammer, attached concrete vibrator, stone cutting machine, diamond drills with water supply; increase coal mining drill class; gardening grass increase Scissors, scissors type grass shears, pruning machines, pruning shears, lawn trimmers, lawn edge trimmers, lawn edge trimmers, lawn loose sand, lawn mower, Masking mowers, walk-controlled mower, rotary mower, sickle mower rod, flail mowers, hover mowers, hand-held Formula gardening blowers, handheld gardening blowing smoke dual-use machine, hand-held gardening sucking machine, drum mowers, lawn scarifiers; Other categories Increases strapping, rust remover, sternum saws. Delete Chapter 3 of this standard included power tools and components, design units can be prepared in principle to this standard model to make recommendations to the Model management unit application. Change. 3.3 "The standard models are not included in the preparation, design units power tools and assembly can refer to the Standards " Due to changes in current affiliations and administrative relations, GB/T 9088-1988 Appendix A A. 1 was changed to "national standard power tools Associate Technical Committee shall be responsible for the management of the power tool model. " Appendix A of this standard is an informative annex The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Power Tools Standardization Technical Committee (SAC/TC68) and focal point responsible for the interpretation. The standard by Shanghai Electric Tool Research Institute is responsible for drafting. The main drafters of this standard. Kim Yi, Liu Jiang, Libang Association This standard in 1998, this revision is the first revision. Establishment method of electric tools

1 Scope

This standard specifies the handheld and portable electric tools (hereinafter referred to as tool) and its model designation of the principle components. Where power tools Model and its components, adjustment shall be specified in this standard A (informative) power tool model application procedures Appendix, by the design unit to the power tool A model management unit application, issued after the effective tenor.

2 Definitions

2.1 Power Tools Model methodology Power Tools product model composed as follows. Category code Power tools category code Code Name Design Unit Code Design Number  Specification Code 2.1.1 category code and each code with a Chinese name Wu alphabet letters, see Table 1. The letter elected according to the following principles. a) maximize the use of objects representative of the first letter of the Chinese phonetic alphabet; b) If you press on the bar selection, occurrence of different products category code and code are the same name, the use of other letters. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9088-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9088-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9088-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9088-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9088-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9088-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.