GB/T 8593.2-2021 English PDFUS$1104.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8593.2-2021: Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories Status: Valid GB/T 8593.2: Historical versions
Basic dataStandard ID: GB/T 8593.2-2021 (GB/T8593.2-2021)Description (Translated English): Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Word Count Estimation: 58,552 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 8593.2-2021: Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Symbols for specific machines, equipment and accessories ICS 53:100 CCSP97 National Standards of People's Republic of China Replacing GB/T 8593:2-2010 Earth-moving machinery driver controls and others Symbols for display devices - Part 2: Machines, Special symbols for work equipment and accessories (ISO 6405-2:2017, IDT) Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General 2 5 colors 3 6 Development of new symbols 3 7 Digital display icon 3 8 GENERAL MACHINE AND EQUIPMENT SYMBOLS3 9 Balance outrigger symbol 6 10 Outrigger symbol 8 11 Grab Bucket Symbol 11 12 Grasping forceps symbol 12 13 Bulldozer Symbol 13 14 Grader Symbol 15 15 Scraper Symbol 20 16 Excavator/Backhoe Symbol 23 17 Excavator/Shovel Symbol 28 18 loader symbol 29 19 Skid Steer Symbol 34 20 Dump Truck Symbol 35 21 Ground loosening working device (ripper or raker) symbol 36 22 winch symbol 38 23 Trencher Symbol 39 24 Horizontal Directional Drilling Rig Symbol 46 25 Counterweight Symbol 53 Reference 54 forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 2 of GB/T 8593 "Symbols for Earth-moving Machinery Driver Controls and Other Display Devices": GB/T 8593 The following sections have been published: --- Part 1: General symbols; --- Part 2: Special symbols for machines, working devices and accessories: This document replaces GB/T 8593:2-2010 "Symbols for earth-moving machinery driver control devices and other display devices - Part 2: Machinery "Special symbols for appliances, working devices and accessories", compared with GB/T 8593:2-2010, except for structural adjustment and editorial modification, the main technical The changes are as follows: --- Changed normative references (see Chapter 2, Chapter 2 of the:2010 edition); --- Changed the definition of "symbol" and added the term and definition of "icon" (see Chapter 3, Chapter 3 of the:2010 edition); --- Added descriptions for the use of symbols, the use of symbols and related words, and the visual effects of symbols (see 4:1, 4:7, 4:8 and 4:8 of Chapter 4): 4:11); --- Added relevant instructions for the development of new symbols (see Chapter 6); --- Added relevant instructions for the adaptation of digital display icons (see Chapter 7); --- The total number of symbols has been increased from 189 to 312, and a detailed description of symbols has been added (see Chapter 8 ~ Chapter 25,:2010 Edition Chapter 6 ~ Chapter 20): This document is equivalent to ISO 6405-2:2017 "Symbols for earth-moving machinery driver controls and other display devices - Part 2: Special symbols for machines, work equipment and accessories": Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334): This document is drafted by: Fujian Minxuan Technology Co:, Ltd:, Tianjin Construction Machinery Research Institute Co:, Ltd:, Lovol Construction Machinery Co:, Ltd: Group Co:, Ltd: The main drafters of this document: Huang Congxia, Liu Xixia, Meng Xiaoxing, Zhu Bin: The previous versions of the documents replaced by this document are as follows: ---First published in 1988 as GB 8593-1988; ---When it was first revised in:1998, it was split into GB/T 8593:1-1998 "Earth-moving machinery driver's manipulation and other display symbols" Part 1: General symbols" and GB/T 8593:2-1998 "Earth-moving machinery driver control and other display symbols Part 2 Part: Special symbols for machines, working devices and accessories", the second revision in:2010; ---This is the third revision:IntroductionGB/T 8593 "Symbols for Earth-moving Machinery Driver Control Devices and Other Display Devices" is a symbol to guide the application of earth-moving machinery products in my country A standard for basic and generality of classes: GB/T 8593 aims to establish driver controls and other displays suitable for earth-moving machinery products The general requirements for symbols for devices and the requirements for special symbols for specific machine families are to be composed of two parts: --- Part 1: General symbols: The purpose is to specify the general symbols for the driver's control device and other display devices of earth-moving machinery products: No: form, and to standardize the description, so that the driver can refer to and use: --- Part 2: Special symbols for machines, working devices and accessories: The purpose is to specify loaders, bulldozers, graders, trenchers Special symbols for driver controls and other displays, as well as balance outriggers, grab buckets, ground The symbols used for special parts such as loose working devices, together with the general symbols in Part 1, are more convenient for drivers to refer to and use: Earth-moving machinery driver controls and others Symbols for display devices - Part 2: Machines, Special symbols for work equipment and accessories1 ScopeThis document specifies special symbols for driver controls and other display devices of earth-moving machinery as defined in ISO 6165: Note 1: ISO 6405-1 is a general symbol applicable to a variety of earth-moving machinery: NOTE 2 Other internationally standardized symbols for potentially relevant earth-moving machinery can be obtained by reference to ISO 7000 and IEC 60417:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 8593:1-2021 Symbols for earth-moving machinery driver operating devices and other display devices Part 1: General symbols (ISO 6405-1:2017, IDT) ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes- Identificationandtermsanddefinitions) Note: GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165:2012, IDT) IEC 80416-1 Basic Rules for Graphical Symbols for Equipment Part 1: Generation of Graphical Symbols for Registration (Basicprinciplesfor graphicalsymbolsforuseoneequipment-Part 1:Creationofgraphicalsymbolsforregistration) Note: GB/T 23371:1-2013 Basic Rules for Graphical Symbols for Electrical Equipment Part 1: Generation of Graphical Symbols for Registration (IEC 80416-1:2008, IDT) ISO 80416-2 Rules for the representation of equipment with graphic symbols - Part 2: Form and use of arrows (Basicprinciplesfor graphicalsymbolsforuseoneequipment-Part 2:Formanduseofarrows) Note: GB/T 16902:2-2008 Rules for the representation of equipment with graphic symbols - Part 2: Form and use of arrows (ISO 80416-2:2001, MOD) IEC 80416-3 Basic Rules for Graphical Symbols for Equipment Part 3: Application Guidelines (Basicprinciplesforgraphicalsym- bolsforuseoneequipment-Part 3:Guidelinesfortheapplicationofgraphicalsymbols) Note: GB/T 23371:3-2009 Basic Rules for Graphical Symbols for Electrical Equipment Part 3: Application Guidelines (IEC 80416-3:2002, IDT)3 Terms and DefinitionsThe following terms and definitions apply to this document: 3:1 symbol symbol graphicsymbol A non-verbal visual image used to convey information: Note 1: It can be made by drawing, printing or other means: Letters, numbers, and mathematical symbols can be used as symbols or symbolic elements: for some specific applications Use letter groups (eg AUTO, STOP) as symbols or symbolic elements: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8593.2-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 8593.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8593.2-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8593.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8593.2-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8593.2-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
