GB/T 8593.1-2021 English PDFUS$1784.00 ยท In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8593.1-2021: Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols Status: Valid GB/T 8593.1: Historical versions
Basic dataStandard ID: GB/T 8593.1-2021 (GB/T8593.1-2021)Description (Translated English): Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Word Count Estimation: 94,968 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 8593.1-2021: Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols ICS 53:100 CCSP97 National Standards of People's Republic of China Replacing GB/T 8593:1-2010 Earth-moving machinery driver controls and others Symbols for display devices - Part 1: General symbols (ISO 6405-1:2017, IDT) Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General 2 5 colors 3 6 Development of new symbols 3 7 Digital display icon 3 8 Basic symbols 3 9 General symbols 5 10 Engine Symbol 37 11 Drivetrain symbols 49 12 Hydraulic system symbols 53 13 Brake symbol 57 14 Fuel symbols 59 15 Lighting symbols 62 16 Windows and Visibility Symbols 66 17 Air Control Symbol 72 18 Seat Symbol 75 19 Tire and Wheel Symbols 78 20 Steering system symbol 84 Appendix A (Informative) Guidelines for the Development and Evaluation of Graphic Symbols 87 References 90 forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 1 of GB/T 8593 "Symbols for Earth-moving Machinery Driver Controls and Other Display Devices": GB/T 8593 The following sections have been published: --- Part 1: General symbols; --- Part 2: Special symbols for machines, working devices and accessories: This document replaces GB/T 8593:1-2010 "Symbols for earth-moving machinery driver operating devices and other display devices - Part 1: General Compared with GB/T 8593:1-2010, except for structural adjustment and editorial changes, the main technical changes are as follows: --- Changed the definition of "symbol", added the term and definition of "icon" (see Chapter 3, 3:1, 3:2, Chapter 3 of the:2010 edition); --- Added descriptions for the use of symbols, the use of symbols and related words, and the visual effects of symbols (see Chapter 4, 4:1, 4:7, 4:8 and 4:11); --- Added relevant instructions for the development of new symbols (see Chapter 6); --- Added relevant instructions for the adaptation of digital display icons (see Chapter 7); --- Increased the number of symbols from 188 to 516 (see Chapter 8 ~ Chapter 20, Chapter 6 of the:2010 edition ~ Chapter 18); --- Added a detailed description of symbols (see Chapter 8 ~ Chapter 20, Chapter 6 ~ Chapter 18 of the:2010 edition): This document is equivalent to ISO 6405-1:2017 "Symbols for earth-moving machinery driver controls and other display devices - Part 1: Universal Symbols": Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334): This document is drafted by: Fujian Minxuan Technology Co:, Ltd:, Tianjin Construction Machinery Research Institute Co:, Ltd:, Lovol Construction Machinery Co:, Ltd: Group Co:, Ltd: The main drafters of this document: Zheng Huating, Chen Baoqing, Meng Xiaoxing, Zhu Bin: The previous versions of this document and its superseded documents are as follows: ---First published in 1988 as GB 8593-1988; ---When it was first revised in:1998, it was split into GB/T 8593:1-1998 "Earth-moving machinery driver's manipulation and other display symbols" Part 1: General symbols" and GB/T 8593:2-1998 "Earth-moving machinery driver control and other display symbols Part 2 Part: Special symbols for machines, working devices and accessories"; Second Amendment in:2010; ---This is the third revision:IntroductionGB/T 8593 "Symbols for Earth-moving Machinery Driver Control Devices and Other Display Devices" is a symbol to guide the application of earth-moving machinery products in my country A standard for basic and generality of classes: GB/T 8593 aims to establish driver controls and other displays suitable for earth-moving machinery products The general requirements for symbols for devices and the requirements for special symbols for specific machine families are to be composed of two parts: --- Part 1: General symbols: The purpose is to specify the general symbols for the driver's control device and other display devices of earth-moving machinery products: No: form, and to standardize the description, so that the driver can refer to and use: --- Part 2: Special symbols for machines, working devices and accessories: The purpose is to specify loaders, bulldozers, graders, trenchers Special symbols for driver controls and other displays, as well as balance outriggers, grab buckets, ground The symbols used for special parts such as loose working devices, together with the general symbols in Part 1, are more convenient for drivers to refer to and use: Earth-moving machinery driver controls and others Symbols for display devices - Part 1: General symbols1 ScopeThis document specifies the common symbols for driver controls and other display devices of earth-moving machinery products as defined in ISO 6165: NOTE 1 ISO 6405-2 covers symbols for special types of earth-moving machinery, work equipment and accessories: NOTE 2 Other internationally standardized symbols for potentially relevant earth-moving machinery can be obtained by reference to ISO 7000 and IEC 60417:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes- Identificationandtermsanddefinitions) Note: GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165:2012, IDT) IEC 80416-1 Basic Rules for Graphical Symbols for Equipment Part 1: Generation of Graphical Symbols for Registration (Basicprinciplesfor graphicalsymbolsforuseoneequipment-Part 1:Creationofgraphicalsymbolsforregistration) Note: GB/T 23371:1-2013 Basic Rules for Graphical Symbols for Electrical Equipment Part 1: Generation of Graphical Symbols for Registration (IEC 80416-1:2008, IDT) ISO 80416-2 Rules for the representation of equipment with graphic symbols - Part 2: Form and use of arrows (Basicprinciplesfor graphicalsymbolsforuseoneequipment-Part 2:Formanduseofarrows) Note: GB/T 16902:2-2008 Rules for the representation of equipment with graphic symbols - Part 2: Form and use of arrows (ISO 80416-2:2001, MOD) IEC 80416-3 Basic Rules for Graphical Symbols for Equipment Part 3: Application Guidelines (Basicprinciplesforgraphicalsym- bolsforuseoneequipment-Part 3:Guidelinesfortheapplicationofgraphicalsymbols) Note: GB/T 23371:3-2009 Basic Rules for Graphical Symbols for Electrical Equipment Part 3: Application Guidelines (IEC 80416-3:2002, IDT)3 Terms and DefinitionsThe following terms and definitions apply to this document: 3:1 symbol symbol graphicsymbol A non-verbal visual image used to convey information: Note 1: It can be made by drawing, printing or other means: Letters, numbers, and mathematical symbols can be used as symbols or symbolic elements: for some specific applications Use letter groups (eg AUTO, STOP) as symbols or symbolic elements: NOTE 2 Letters and numbers are not registered in ISO /TC145/SC3 unless they are symbolic elements embedded in a graphic symbol, nor Will not be published in ISO 7000: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8593.1-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 8593.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8593.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8593.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8593.1-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8593.1-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
