GB/T 8511-2018 English PDF

US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8511-2018: Vibratory roller
Status: Valid

GB/T 8511: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 8511-2018	519	Add to Cart	5 days	Vibratory roller	Valid
GB/T 8511-2005	150	Add to Cart	Auto, < 3 mins	Vibratory roller	Obsolete
GB/T 8511.1-1995	359	Add to Cart	3 days	Self-propelled vibratory rollers	Obsolete
GB 8511.1-1987	319	Add to Cart	3 days	Technical specification for vibratory rollers self--Propelled vibratory roller	Obsolete

Similar standards

GB/T 8419   GB/T 17300   GB/T 16936   GB/T 8498   GB/T 8506   

Basic data

Standard ID: GB/T 8511-2018 (GB/T8511-2018)
Description (Translated English): Vibratory roller
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 26,231
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Older Standard (superseded by this standard): GB/T 8511-2005
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 8511-2018: Vibratory roller

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vibratory roller ICS 53.100 P97 National Standards of People's Republic of China Replace GB/T 8511-2005 Vibratory roller Vibratoryroler Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Category 2 5 Requirements 3 6 Test method 4 7 Inspection rules 10 8 Marking, packaging, transportation and storage 12 Appendix A (informative) Road roller test record table 13 Appendix B (informative appendix) General Project Inspection and Evaluation Form 20 Appendix C (informative) Reliability Test Record Table 21 Appendix D (Normative Appendix) Reliability Test Failure Classification Table 23

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 8511-2005 "Vibratory Roller", compared with GB/T 8511-2005, in addition to editorial modifications, the main technology The content changes are as follows. --- Increased definition of amplitude uniformity (see 3.2); --- Revised the preparation method of the product model (see 4.2, 4.2 of the.2005 edition); --- Revised the specification series of the working quality of the roller and the corresponding parameters (see Table 1, Table 2, Table 3, Table 2, Table 3 of the.2005 edition, Table 4); --- Revised the basic requirements (see 5.1, 5.1 of the.2005 edition); ---Modified the work quality requirements of the roller (see 5.2.1, 5.2.1 of the.2005 edition); --- Revised the deviation requirements of the vibration frequency (see 5.2.2, 5.2.2 of the.2005 edition); --- Increased amplitude uniformity requirements (see 5.2.2); --- Removed the requirements of the drive system (5.2.12 of the.2005 edition); --- Revised operational requirements (see 5.2.5, Table 5 of the.2005 edition); --- Removed the requirement for lubricating oil (2005 version 5.2.7); ---Modified the cleanliness level of solid oil contamination of hydraulic oil (see 5.2.7, 5.2.6 of.2005 edition); --- Revised the climbing requirements (see 5.2.8, 5.2.8 of the.2005 edition); --- Modify the minimum turning diameter (see Table 1, Table 7 of the.2005 edition); --- Revised the leakage oil requirements (see 5.2.21,.2005 edition of 5.2.14); --- Increased safety and environmental protection related requirements (see 5.3,.2005 edition of 5.3); --- Revised the reliability indicator (see 5.4.1, 5.4.1 of the.2005 edition); --- Revised the corresponding test method (see Chapter 6, Chapter 6 of the.2005 edition); --- Revised the inspection item list (see Table 4, Table 9 of the.2005 edition); --- Revised the inspection decision rules (see 7.4, 7.4 of the.2005 edition); --- Modified the requirements for marking, packaging, transportation and storage (see Chapter 8, Chapter 8 of the.2005 edition). This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334). This standard is drafted by. Xugong Group Engineering Machinery Co., Ltd. Road Machinery Branch, Sany Heavy Industry Co., Ltd., Shantui Construction Machinery Co., Ltd., SINOMACH (Luoyang) Construction Machinery Co., Ltd., Qingdao Ketai Heavy Industry Machinery Co., Ltd., Tianjin Industrial Cheng Machinery Research Institute Co., Ltd. Participated in the drafting of this standard. Hefei Yongan Greenland Construction Machinery Co., Ltd., Volvo Construction Equipment Investment (China) Co., Ltd. The main drafters of this standard. Wang Chuang, Zhou Baogang, Li Lianghui, Wei Guangyu, Zhang Xuehui, Yao Luxing, Chen Shuqiao, Song Yi, Zhu Haiyan, Liu Xixia. The previous versions of the standards replaced by this standard are. ---GB/T 8511-2005. Vibratory roller

1 Scope

This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, signs, vibratory roller (hereinafter referred to as road roller). Packaging, transportation and storage. This standard applies to self-propelled, towed and walk-behind vibratory rollers.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 7920.5 Earth-moving machinery roller and backfill compactor terminology and commercial specifications GB/T 8595 earthmoving machinery driver's operating device GB/T 10913 earthmoving machine speed measurement GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code GB 16710 earthmoving machinery noise limit GB/T 16937 earth-moving machinery driver vision test method and performance criteria GB/T 18148 earth-moving machinery compaction machinery compaction performance test method GB/T 18826 Industrial 1,1,1,2-tetrafluoroethane (HFC-134a) GB/T 20082 Hydraulic fluid transmission liquid pollution method using optical microscope to measure particle contamination GB .20178 Earth-moving machinery machine safety label general rules GB 20891 Diesel engine exhaust pollutant emission limits and measurement methods for non-road mobile machinery (China's third and fourth stages) GB/T 21152 Earth-moving machinery - Tire type machine brake system performance requirements and test methods GB/T 22358 Earthmoving machinery protection and storage GB/T 25602 Earthmoving Machinery Machine Usability Terminology GB/T 25606 Earthmoving Machinery Product Identification Code System GB/T 25609 Earthmoving machinery - Performance requirements and test methods for braking systems GB/T 25614 Earth-moving machinery sound power level determination dynamic test conditions GB/T 25615 Earth-moving machinery driver positional emission sound pressure level determination dynamic test conditions GB/T 25624 earthmoving machinery driver seat size and requirements GB 25684.1 Earthmoving machinery safety - Part 1. General requirements GB 25684.13 Safety of earthmoving machinery - Part 13. Requirements for road rollers General technical conditions for JB/T 5945 construction machinery assembly JB/T 5946 General technical conditions for engineering machinery painting JB/T 5947 General technical conditions for engineering machinery packaging JB/T 9725 earthwork machinery product model preparation method JG/T 5076.2 Vibratory roller vibration damping system inspection specification ISO 11500 hydraulic drive with extinction principle for automatic particle counting to determine the degree of particulate contamination of liquid samples (Hydraulic fluidpower-Determinationoftheparticulatecontaminationlevelofaliquidsamplebyautomaticpar- ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 8511-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 8511-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 8511-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 8511-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 8511-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8511-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.