GB/T 8420-2011 English PDF

US$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8420-2011: Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope
Status: Valid

GB/T 8420: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 8420-2011	234	Add to Cart	3 days	Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope	Valid
GB/T 8420-2000	479	Add to Cart	4 days	Earth-moving machinery-Human physical dimensions of operators and minimum operator space envelope	Obsolete
GB/T 8420-1987	RFQ	ASK	3 days	Earth-moving machinery--Human physical dimensions of operators and minimum operator space envelope	Obsolete

Similar standards

GB/T 8419   GB/T 17300   GB/T 16936   GB/T 8498   GB/T 8595   

Basic data

Standard ID: GB/T 8420-2011 (GB/T8420-2011)
Description (Translated English): Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 12,127
Date of Issue: 2011-09-29
Date of Implementation: 2012-01-01
Older Standard (superseded by this standard): GB/T 8420-2000
Quoted Standard: ISO 5353; ISO 6165; ISO 11112
Adopted Standard: ISO 3411-2007, IDT
Regulation (derived from): National Standards Bulletin 2011 No. 14
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the ISO 6165 Earth-moving machinery as defined in the driver 's body size and space for drivers to normal operation range of the minimum space. This standard does not apply to manufactured prior to the implementation of this standard machines.

GB/T 8420-2011: Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery. Physical dimeodons of operators and minimum operator space envelope ICS 53.100 P97 National Standards of People's Republic of China Replacing GB/T 8420-2000 Moving machinery - Human physical dimensions Operators and minimum space (ISO 3411.2007, IDT) Issued on. 2011-09-29 2012-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 8420-2000 "moving machinery physical dimensions of operators and minimum space." This standard GB/T 8420-2000 compared to, in addition to editorial changes outside the main technical changes are as follows. --- Increased introduction; --- Range is not limited to the male driver; --- Remove the "driver stature percentile" in graph (see Figure 1 edition 2000); --- Modify the terms and definitions (see Chapter 3, Section 3 of the 2000 edition); --- Revised Figure 1, Figure 2, Figure 3 tables of values \u200b\u200b(Figures 1, 2, 3, 2000 edition of the Table 1, Table 2, Table 3); --- Modified Figures 4, 5 (Figures 4 and 5, 2000 edition of FIGS. 5 and 6); --- "From the SIP to the cab side wall minimum distance" from the 335mm adjustment of 325mm (see 523, 2000 edition 5.4.); --- Deleted provisions earthmoving machinery comfort and handling device manipulation region and may range (see 2000 edition of Appendix A). This standard uses the translation method identical with ISO 3411.2007 "minimum activity moving machinery physical dimensions of operators and air between". Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 8591-2000 "moving machinery - Seat index point" (eqv ISO 5353.1995); --- GB/T 8498-2008 "earth-moving machinery - Basic types - Identification and terms and definitions" (ISO 6165.2006, IDT); --- GB/T 25624-2010 "moving machinery - Seat dimensions and requirements" (ISO 11112.1995, IDT). The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard was drafted. Tianjin Institute of Mechanical Engineering, Guangxi Liugong Machinery Co., Ltd, Rongsheng Machinery Co., Ltd, Shaanxi Tongli Heavy Industries Co., Ltd., Hill redevelopment Machine Co., Ltd. The main drafters of this standard. Duan Lin, Huang Zhongliang, Gengyue Hai, Fancui Ling, NI Lin, Hahei Shan. This standard replaces the standards previously issued as follows. --- GB/T 8420-1987, GB/T 8420-2000.

Introduction

The standard size is based on US driver (CAESAR data), Europe (ISO 15534-3.2000) and Asia (China, Japan, South Korea And Thailand) male and female data obtained. Asian male driver of the size of the data within the range of 5% to 95% of the joint US and European data. Therefore, as the representative of the United States and Europe The driver population, the driver is based on the size of the data derived from the above two regions. To calculate the potential growth of Asian female driver from the previous version It retains the value of the diminutive size of the driver, rather than the United States and Europe tall driver data. Dimensions specified in this standard is worth the actual measurements listed above that, when unable to obtain a specific size, can be obtained based on the measurement scale Growth trends inch from a previous version of a proportion worth. This standard specifies the minimum driver's normal activities within a specific earthmoving machinery space can be added or modified. Moving machinery - Human physical dimensions Operators and minimum space

1 Scope

This standard specifies the physical dimensions as defined in ISO 6165 and moving machinery used in the normal operation of the driver space minimum Space range. This standard does not apply to this standard prior to the implementation of the manufacturing machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 5353 Earth-moving machinery - Seat index point (Earth-movingmachinery, andtractorsandmachineryfor agricultureandforestry-Seatindexpoint) ISO 6165 Earth - moving machinery - Basic types - Identification and terms and definitions (Earth-movingmachinery-Basictypes- Identificationandtermsanddefinitions) ISO 11112 moving machinery - Seat size and requirements (Earth-movingmachinery-Operator'sseat- Dimensionsandrequirements)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Short stature drivers smaloperator In moving machinery worldwide, about 5% shorter than listed driver's body size. 3.2 Average driver mediumoperator In moving machinery worldwide, about 50 percent shorter than the drivers listed in physical dimensions, higher than the rest of the drivers listed in the body Timber size. 3.3 Tall stature drivers largeoperator In moving machinery worldwide, about 5% higher than the drivers listed in physical dimensions. 3.4 Working posture workingposture The driver posture at work. 3.5 Upright posture erectposture Without backrest upright standing or sitting. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 8420-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 8420-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 8420-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 8420-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 8420-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8420-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.