GB/T 8169-2008 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8169-2008: Testing method of vibration transmissibility for packaging cushioning materials Status: Valid GB/T 8169: Historical versions
Basic dataStandard ID: GB/T 8169-2008 (GB/T8169-2008)Description (Translated English): Testing method of vibration transmissibility for packaging cushioning materials Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A82 Classification of International Standard: 55.040 Word Count Estimation: 7,773 Date of Issue: 2008-06-10 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 8169-1987 Quoted Standard: GB/T 4122.1; GB/T 4857.2 Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2008 (No. 122 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the packaging with cushioning material vibration transmissibility test equipment, test samples, test procedures and test report. This standard applies to assess the effect of sinusoidal vibration cushioning material for packaging vibration transmission (isolation) characteristics and the contents of the packaging protection. This standard applies to nonlinear elastic cushioning material. GB/T 8169-2008: Testing method of vibration transmissibility for packaging cushioning materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Testing method of vibration transmissibility for packaging cushioning materials ICS 55.040 A82 National Standards of People's Republic of China Replacing GB/T 8169-1987 The vibration transmission characteristics of package cushioning material experiment method Posted 2008-06-10 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 8169-1987 "Test Method for Packaging Features passed cushioning material vibration." This standard compared with GB/T 8169-1987, the main changes are as follows. --- Increase in the content references, terminology; --- Modify the test equipment shaker relevant requirements; --- Modify the number of test samples of the relevant requirements; --- Increasing the predetermined vertical position of the fixture, the test sample, the mass center of gravity; --- Clear during the test pass rate of acceleration transmissibility; --- Clear vibration transfer rate test output - Rendering frequency curve. Appendix A of this standard is an informative annex. This standard by the National Packaging Standardization Technical Committee (SAC/TC49) and focal points. This standard was drafted. the machine Productivity Promotion Center, Shenzhen MYS Environmental Protection Technology Co., Ltd, China Export Commodities Packaging graduate School. The main drafters of this standard. yellow snow, Cai Shao Ling, Li Jianhua, Zhang Jian, Liu Ping. This standard replaces the standards previously issued as follows. --- GB/T 8169-1987. The vibration transmission characteristics of package cushioning material experiment method1 ScopeThis standard specifies the test equipment package cushioning material vibration transmission characteristic test, the test samples, test procedures and test reports. This standard applies to the assessment of vibration transmission cushion packaging materials (isolation) and the properties of the contents of the package of insurance under sinusoidal vibration effect Care ability. This standard applies to nonlinear elastic cushioning material.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4122.1 Packaging - Terminology - Part 1. Basic GB/T 4857.2 Basic tests for transport packages - Part 2. Temperature and humidity adjustment process (GB/T 4857.2-2005, ISO 2233.2000, MOD)3 TermsGB/T 4122.1 and established the following terms and definitions apply to this standard. 3.1 Acceleration acceleration ratio shaker table of the mass. 3.2 Vibration frequency vibration table during the test as the horizontal, an acceleration test was formed during the transfer ordinate, plotted Curve.4 Test principleThe tests conducted by mass, cushioning materials, fixtures and constitute a vibration shaker system to simulate the package in the slow sinusoidal vibration effect Chong material (hereinafter referred to as the test sample) for vibration absorption, transfer characteristics. Acceleration vibration state mass and vibrating table test record Values, and expressed as the vibration transmissibility - frequency characteristic curve.5 Test Equipment5.1 shaker Shaking table should have a sufficiently large size, sufficient strength, rigidity and load carrying capacity. The structure should be able to guarantee the vibration shaker table Maintain the level of the state, its lowest resonance frequency should be higher than the maximum test frequency. Shaking table should be flat, and the maximum angle between the level changes 0.3 °. 5.2 Fixtures 5.2.1 The fixture should have done to ensure the quality of the block rigidity and strength of vertical vibration, the structure see Appendix A. Fixtures and Quality Friction between the blocks should not affect the vibration response of the mass. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8169-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8169-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8169-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8169-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8169-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8169-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
