GB/T 8165-2025 English PDFUS$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8165-2025: Stainless steel clad plate, sheet and strip Status: Valid GB/T 8165: Historical versions
Basic dataStandard ID: GB/T 8165-2025 (GB/T8165-2025)Description (Translated English): Stainless steel clad plate, sheet and strip Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H46 Classification of International Standard: 77.140.50 Word Count Estimation: 14,161 Date of Issue: 2025-06-30 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB/T 8165-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 8165-2025: Stainless steel clad plate, sheet and strip---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT8165-2025ICS 77.140.50 CCSH46 National Standard of the People's Republic of China Replaces GB/T 8165-2008 Stainless steel composite steel plates and strips Released on June 30, 2025 Implementation on January 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 8165-2008 "Stainless Steel Composite Plate and Strip". Compared with GB/T 8165-2008, except for the structural adjustment Besides the editorial changes, the main technical changes are as follows. a) The applicable scope of the product has been changed (see Chapter 1, Chapter 1 of the.2008 edition), and the thickness range of composite steel plates (strips) has been deleted. Provisions (see Chapter 1 of the.2008 edition), deleted the shear steel plate (see Chapter 1 of the.2008 edition); b) Some terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2008 edition); c) The classification of composite steel plates (strips) has been deleted (see Table 1 of the.2008 edition); d) Added requirements for product labeling (see 4.2); e) Added delivery status (see 5.2); f) Product standards for the covering and base materials of composite steel plates (strips) have been added, and steel grades are listed uniformly according to numerical codes (see Table 2); g) Added non-destructive testing standards related to repair welding of composite steel plates (strips) (see 7.2.2); h) The provisions on the mechanical properties of composite steel plates (strips) have been modified (see Table 4, 7.3 of the.2008 edition); i) The requirements for the bending properties of composite steel plates (strips) have been changed (see Tables 5 and 6, and Tables 11 and 12 of the.2008 edition); j) The cupping test was deleted (see 7.4.2 of the.2008 edition); k) The provisions on the surface quality of composite steel plates (strips) have been changed (see 7.5, 7.5 of the.2008 edition); l) Added the pitting corrosion resistance test for composite steel plates (strips) (see 7.6). The corrosion test of the cladding materials before and after composite is determined by negotiation. (See 7.6, 7.6 of the.2008 edition); m) Added the test for ferrite content (see 7.7); n) The provisions on the dimensions, composite area, cladding thickness and tolerance of composite steel plates (strips) have been changed. Only the cladding thickness tolerance has been changed. The total thickness tolerance is determined according to the “Allowable deviation of the covering material and the base material” (see 7.8 and 7.9, 6.1 and.2008 edition). 6.2); o) The unevenness regulations have been changed except for those where the yield strength of the base material is greater than 460 MPa. The regulations are now in accordance with GB/T 708 and GB/T 709. Implementation (see 7.9.3, 6.2.1.4 and 6.2.2.3 of the.2008 edition); p) The test method has been changed (see Chapter 8, Chapter 8 of the.2008 edition); q) The batching principle and delivery status have been changed (see 9.2, 9.2 of the.2008 edition); r) The provisions on packaging marks and quality certificates for composite steel plates (strips) have been modified (see Chapter 10, Chapter 10 of the.2008 edition); s) Appendix A is deleted (see Appendix A of the.2008 edition); t) Added the density value of stainless steel (see Appendix A). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Iron and Steel Association. This document is under the jurisdiction of the National Technical Committee on Steel Standardization (SAC/TC183). This document was drafted by. Shanxi Taigang Stainless Steel Co., Ltd., Hebei Special Equipment Supervision and Inspection Institute, Metallurgical Industry Information Standards Research Institute, Hunan Valin Lianyuan Iron and Steel Co., Ltd., Hunan Valin Xiangtan Iron and Steel Co., Ltd., Jiangsu Shagang Iron and Steel Co., Ltd., Jiangsu Guan Sen New Materials Technology Co., Ltd. The main drafters of this document are. Li Guoping, Wu Qiang, Yan Wenjun, Sun Menghan, Liu Ning, Bai Xing, Zhen Fan, Wang Hucheng, Liu Baojie, Tian Zijian, Liu Zhao, Gao Qing, Zhao Hui, Ren Yongxiu, Jiang Chunjing, Zhang Weixu, and Li Qian. This document was first issued in 1987, revised for the first time in.1997, revised for the second time in.2008, and this is the third revision. Stainless steel composite steel plates and strips1 ScopeThis document specifies the stainless steel composite steel plates and steel strips produced by explosive composite method, explosive rolling method and rolling composite method [hereinafter referred to as Classification and code of composite steel plate (strip), manufacturing process, order content, technical requirements, test methods, inspection rules, packaging, marking and quality certificate Mingshu, etc. This document is applicable to composite steel plates (strips) with stainless steel as cladding material and carbon steel, low alloy steel or alloy steel as base material, used for manufacturing various Single-sided and double-sided composite steel plates (strips) for pressure vessels, storage tanks, structural parts, etc.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 247 General provisions for packaging, marking and quality certification of steel plates and steel strips GB/T 708 Dimensions, shapes, weights and tolerances of cold-rolled steel sheets and strips GB/T 709 Dimensions, shapes, weights and tolerances of hot-rolled steel plates and strips GB/T 711 High-quality carbon structural steel hot-rolled plates and strips GB/T 712 Structural steel for ships and marine engineering GB/T 713.2 Steel plates and strip for pressure equipment Part 2.Non-alloy steels and alloy steels with specified temperature properties GB/T 713.3 Steel plates and strips for pressure equipment Part 3.Low alloy steels with specified low temperature properties GB/T 713.7 Steel plates and strips for pressure equipment Part 7.Stainless steel and heat-resistant steel GB/T 714 Structural steel for bridges GB/T 3274 Hot-rolled carbon structural steel and low-alloy structural steel plates and strips GB/T 3280 Stainless steel cold-rolled steel sheet and strip GB/T 4237 Stainless steel hot-rolled steel plates and strips GB/T 4334 Corrosion of metals and alloys - Test method for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels GB/T 6396 Test methods for mechanical and process properties of composite steel plates GB/T 7734 Ultrasonic testing method for composite steel plates GB/T 8170 Rules for rounding off values and expression and determination of limit values GB/T 8651 Metal sheet ultrasonic wave flaw detection method GB/T 13305 Determination of α-phase content in stainless steel GB/T 17505 General technical requirements for delivery of steel and steel products GB/T 17897 Corrosion of metals and alloys - Test method for pitting corrosion of stainless steel using ferric chloride NB/T 47013.5-2015 Nondestructive testing of pressure equipment Part 5.Penetrant testing TB/T 1979 Special Metal Materials for Rolling Stock - Atmospheric Corrosion Resistant Steel TB/T 3462 Stainless steel plates (strips) for railway freight cars ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8165-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 8165-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8165-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8165-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8165-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8165-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
