GB/T 8152.1-2006 PDF EnglishUS$200.00 · In stock · Download in 9 seconds
GB/T 8152.1-2006: Methods for chemical analysis of lead concentrates -- Determination of lead content -- EDTA titration method after acid digestion (ISO 13545: 200E Lead sulfide concentrates -- Determination of lead content -- EDTA titration method after acid digestion, ID Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 8152.1: Historical versions
Similar standardsGB/T 8152.1-2006: Methods for chemical analysis of lead concentrates -- Determination of lead content -- EDTA titration method after acid digestion (ISO 13545: 200E Lead sulfide concentrates -- Determination of lead content -- EDTA titration method after acid digestion, ID---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT8152.1-2006 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 73.060 D 42 GB/T 8152.1-2006 / ISO 13545:2000(E) Replacing GB/T 8152.1-1987 Methods for Chemical Analysis of Lead Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion (ISO 13545:2000E Lead Sulfide Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion, IDT) ISSUED ON: AUGUST 24, 2006 IMPLEMENTED ON: FEBRUARY 1, 2007 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 6 2 Normative References ... 6 3 Principle ... 7 4 Reagents ... 7 5 Apparatus ... 10 6 Sampling ... 10 7 Procedure ... 11 8 Expression of Results ... 14 9 Accuracy ... 15 10 Test Report ... 18 Appendix A (Normative) Procedure for the Preparation and Determination of the Mass of a Pre-dried Test Portion ... 19 Appendix B (Normative) Flowchart of the Procedure for the Acceptance of Analytical Values for Test Samples ... 21 Appendix C (Informative) Derivation of Precision Equations ... 22ForewordGB/T 8152-2006 Methods for Chemical Analysis of Lead Concentrates has a total of 10 parts: ---GB/T 8152.1 Methods for Chemical Analysis of Lead Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion; ---GB/T 8152.2 Methods for Chemical Analysis of Lead Concentrates - Determination of Lead Content - Back Titration of EDTA after Precipitation of Lead Sulfate; ---GB/T 8152.3 Methods for Chemical Analysis of Lead Concentrates - Determination of Aluminum (III) Oxide Content – Chrome azurol S Spectrophotometric Method; ---GB/T 8152.4 Methods for Chemical Analysis of Lead Concentrates - Determination of Zinc Content - EDTA Titration Method; ---GB/T 8152.5 Methods for Chemical Analysis of Lead Concentrates - Determination of Arsenic Content - Atomic Fluorescence Spectrometer Method; ---GB/T 8152.7 Methods for Chemical Analysis of Lead Concentrates - Determination of Copper Content - Flame Atomic Absorption Spectrometric Method; ---GB/T 8152.9 Methods for Chemical Analysis of Lead Concentrates - Determination of Magnesium Oxide Content - Flame Atomic Absorption Spectrometric Method; ---GB/T 8152.10 Methods for Chemical Analysis of Lead Concentrates - Determination of Silver and Gold Content - Fire Assay and Flame Atomic Absorption Spectrometric Method Using Scorification or Cupellation; ---GB/T 8152.11 Methods for Chemical Analysis of Lead Concentrates - Determination of Mercury Content - Atomic Fluorescence Spectrometer Method; ---GB/T 8152.12 Methods for Chemical Analysis of Lead Concentrates - Determination of Cadmium Content - Flame Atomic Absorption Spectrometric Method. In which, GB/T 8152.6-1987 Methods for Chemical Analysis of Lead Concentrates - the Polarographic Method for the Determination of Bismuth Content and GB/T 8152.8- 1987 Methods for Chemical Analysis of Lead Concentrates - The DTPM Spectrophotometric Method for the Determination of Bismuth Content remain unchanged. This is Part 1. This Part equivalently adopts ISO 13545:2000 (E) Lead Sulfide Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion (English version). This Part equivalently translates ISO 13545:2000 (E). For ease of use, this Part makes the following editorial modifications: a) Use decimal point “.” to replace comma “,”, which is used as a decimal point in the international standard; b) Use “this Part” to replace “this international standard”; c) The title of the standard is modified in accordance with the Chinese customs; d) The Cover, Contents, Foreword and Introduction of the international standard are deleted. This Part serves as a replacement of GB/T 8152.1-1987 Methods for Chemical Analysis of Lead Concentrates - The Na2EDTA Volumetric Method for the Determination of Lead Content. Due to the development of the international analytical technology, the previous standard has been out of date. In comparison with GB/T 8152.1-1987, there are the following changes: a) This Part bases on the previous national standard, which merely determines lead content in lead sulfate, and adds the determination of lead content in the filtrate and insoluble slag, which improves the accuracy of the method. b) This Part adds general normative elements, such as: “Scope” and “Normative References”, and technical normative elements, such as: “Precision” and “Test Report”, so as to further complete the standard text. c) Appendix A “Determination of Lead Content when Barium Content Exceeds 1/10 of Lead Content” in the previous national standard is deleted. d) Appendix A “Procedure for the Preparation and Determination of the Mass of a Pre-dried Test Portion”, Appendix B “Flowchart of the Procedure for the Acceptance of Analytical Values for Test Samples” and Appendix C “Derivation of Precision Equations” are added. In this Part, Appendix A and Appendix B are normative; Appendix C is informative. This Part was proposed by China Nonferrous Metals Industry Association. This Part shall be under the jurisdiction of National Technical Committee on Nonferrous Metals of Standardization Administration of China. Methods for Chemical Analysis of Lead Concentrates - Determination of Lead Content - EDTA Titration Method after Acid Digestion WARNING - this Part may involve hazardous materials, operations and equipment. It is the responsibility of the user of this Part to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use.1 ScopeThis Part specifies a lead sulfate precipitation EDTA titrimetric method after acid decomposition for determination of the lead content of lead sulfide concentrates. The method is applicable to lead sulfide concentrates having lead content in the range 50% (m/m) to 80% (m/m). The method is not applicable to lead concentrates containing more than 1% (m/m) of barium. This Standard is an arbitration analysis method.2 Normative ReferencesThe following normative documents contain certain provisions which, through reference in this text constitute provisions of this Part. For dated references, subsequent amendments to. or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 385-1:1984 Laboratory glassware - Burettes - Part 1: General requirements ISO 648:1977 Laboratory glassware - One-mark pipettes ISO 1042:1998 Laboratory glassware - One-mark volumetric flasks ISO 3696:1987 Water for analytical laboratory use - Specification and test methods ISO 4787:1984 Laboratory glassware - Volumetric glassware - Methods for use and testing of capacity ISO 9599:1991 Copper, lead and zinc sulfide concentrates - Determination of ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 8152.1-2006 be delivered?Answer: The full copy PDF of English version of GB/T 8152.1-2006 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 8152.1-2006_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8152.1-2006_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 8152.1-2006 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 8152.1-2006?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8152.1-2006 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 8152.1-2006?A step-by-step guide to download PDF of GB/T 8152.1-2006_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 8152.1-2006". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
