GB/T 7731.9-2008 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7731.9-2008: Ferrotungsten -- Determination of bismuth content -- The bismuth iodide photometric method and inductively coupled plasma atomic emission spectrometry Status: Valid GB/T 7731.9: Historical versions
Basic dataStandard ID: GB/T 7731.9-2008 (GB/T7731.9-2008)Description (Translated English): Ferrotungsten -- Determination of bismuth content -- The bismuth iodide photometric method and inductively coupled plasma atomic emission spectrometry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H11 Classification of International Standard: 77.100 Word Count Estimation: 10,191 Date of Issue: 2008-08-19 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 7731.9-1987 Quoted Standard: GB/T 4010 Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the determination of tungsten, bismuth iron content of bismuth iodide spectrometry method and inductively coupled plasma atomic emission. This section applies to the determination of tungsten, bismuth iron content. Spectrophotometric determination of bismuth iodide range (mass fraction): 0. 010 %-0. 060%, inductively coupled plasma atomic emission spectrometry range (mass fraction): 0. 010% to 0. 15 %. GB/T 7731.9-2008: Ferrotungsten -- Determination of bismuth content -- The bismuth iodide photometric method and inductively coupled plasma atomic emission spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Ferrotungsten. Determination of bismuth content. The bismuth iodide photometric method and inductively coupled plasma. Atomic emission spectrometry ICS 77.100 H11 National Standards of People's Republic of China Replacing GB/T 7731.9-1987 Determination of tungsten content of bismuth iron Bismuth iodide photometric method and inductively coupled plasma Atomic Emission Spectrometry Posted 2008-08-19 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 7731 in this part is to GB/T 7731.9-1987 "tungsten iron chemical analysis of bismuth iodide photometric method for determination of bismuth content" of Amended to include the two methods bismuth iodide photometric method and inductively coupled plasma atomic emission spectrometry. This Part replaces GB/T 7731.9-1987. This portion of the GB/T 7731.9-1987 comparison, the main changes are as follows. --- Standard text bismuth iodide photometric method for the preparation of a standardized format; --- Increased by inductively coupled plasma atomic emission spectrometry. Appendix A of this section is an informative annex. This part is proposed by the China Iron and Steel Association. This part of pig iron and ferroalloy by the National Standardization Technical Committee. This section is drafted. Sinosteel Jilin Ferroalloy Co., Ltd. The main drafters of this section. phosphorus, copper, Zhang Yunpeng, Wu Liyu, Yuan winter snows. This part of the standard replaces the previous editions are. --- GB/T 7731.9-1987. Determination of tungsten content of bismuth iron Bismuth iodide photometric method and inductively coupled plasma Atomic Emission Spectrometry Warning. Use of practical experience GB/T 7731 this part of the staff should have regular laboratory work. This section does not indicate all available Energy security issues. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.1 ScopeGB/T 7731 This section specifies the spectrophotometric determination of tungsten and iron by inductively coupled plasma atomic emission spectrometry with bismuth iodide Bismuth content. This section applies to the determination of tungsten in the iron content of bismuth. Bismuth iodide spectrophotometric measurement range (mass fraction). 0.010% - 0.060%; electricity Inductively coupled plasma atomic emission spectrometry range (mass fraction). 0.010% to 0.15%.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 7731 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 4010 alloy chemical analysis and preparation of samples 3 Method One. bismuth iodide photometric method 3.1 Principle Sample with nitric acid, hydrofluoric acid decomposition, white smoke treated with sulfuric acid, tartaric acid in sulfuric acid solution containing the hydrogen sulfide, so that bismuth and copper, tin And other co-precipitation, then potassium sulfide treatment, the bismuth and copper, tin and other separation. Burning oxide, nitric acid is dissolved in the presence of ammonium ferric sulfate, hydrogen The co-precipitation of ammonium bismuth oxide is separated, dissolved in sulfuric acid, potassium iodide and sodium hypophosphite make bismuth hair color, measured at 450nm wavelength Absorbance. Low amount of bismuth to isoamyl alcohol extraction, the organic phase was measured absorbance at 450nm wavelength. 3.2 Reagents and materials Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled water or its equivalent purity water. 3.2.1 tartaric, solid. 3.2.2 hydrofluoric acid, ρ1.12g/mL. 3.2.3 nitric acid, 1 + 1. 3.2.4 sulfate, 1 + 1. 3.2.5 sulfate, 100 + 1. 3.2.6 Ammonium hydroxide, 1 + 1. 3.2.7 copper sulfate (CuSO4 · 5H2O) solution, 2g/L. 3.2.8 hydrogen sulfide, ferrous sulfide and dilute hydrochloric acid occurs Kipp generator reaction. 3.2.9 sodium hypophosphite solution, 250g/L. 3.2.10 potassium iodide solution, 100g/L. High-speed rail 3.2.11 ammonium sulfate solution, 10g/L. Weigh 1g ammonium ferric sulfate [Fe2 (SO4) 3 (NH4) 2SO4 · 24H2O], dissolved in water, Diluted 100mL, and mix. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7731.9-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 7731.9-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7731.9-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7731.9-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7731.9-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7731.9-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
