GB/T 7717.12-2022 English PDFUS$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7717.12-2022: Acrylonitrile for industrial use - Part 12: Determination of purity and impurities - Gas chromatographic method Status: Valid GB/T 7717.12: Historical versions
Basic dataStandard ID: GB/T 7717.12-2022 (GB/T7717.12-2022)Description (Translated English): Acrylonitrile for industrial use - Part 12: Determination of purity and impurities - Gas chromatographic method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G17 Word Count Estimation: 13,177 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 7717.12-2022: Acrylonitrile for industrial use - Part 12: Determination of purity and impurities - Gas chromatographic method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Acrylonitrile for industrial use - Part 12.Determination of purity and impurities - Gas chromatographic method ICS 71.080.30 CCSG17 National Standards of People's Republic of China Replacing GB/T 7717.12-2008 Industrial Acrylonitrile Part 12.Determination of purity and impurity content gas chromatography Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 12 of GB/T 7717 "Acrylonitrile for Industrial Use". GB/T 7717 has released the following parts. --- Part 1.Specifications; --- Part 5.Determination of acidity, pH value and titration value; --- Part 8.Spectrophotometric method for the determination of total aldehyde content; --- Part 9.Determination of total cyanide content by titration; --- Part 10.Spectrophotometric method for the determination of peroxide content; --- Part 11.Spectrophotometric method for the determination of iron and copper content; --- Part 12.Determination of purity and impurity content by gas chromatography; --- Part 15.Determination of p-hydroxyanisole content; --- Part 16.Determination of iron and copper content by graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry. This document replaces GB/T 7717.12-2008 "Industrial Acrylonitrile Part 12.Determination of Purity and Impurity Content by Gas Chromatography Compared with GB/T 7717.12-2008, in addition to structural adjustment and editorial changes, the main technical changes are as follows. a) Changed the scope and re-specified the detection limit of the method (see Chapter 1, Chapter 1 of the.2008 edition); b) Changed the column specifications and chromatographic conditions, and added a new FFAP capillary column (60m×0.32mm×1.0μm) and chromatographic conditions (see 6.2, 7.1 of the.2008 edition); c) Added the chromatographic conditions for the determination of low-level impurities (see 6.2); d) The quantification method adds the correction area normalization method (see 4.2, 8.3); e) added alternatives for the correction factors for acrolein, propionitrile and methacrylonitrile (see 8.2.3, 8.3.3.); f) Changed the type of impurities deducted in the purity calculation formula (see 8.2.3, 8.1.2 of the.2008 edition); g) Re-determined the repeatability limit of the method and increased the reproducibility limit (see Chapter 10, Chapter 9 of the.2008 edition); h) quality control was added (see Chapter 11); i) The original Appendix A was deleted. In the added Appendix A, the relative mass of acrylonitrile to toluene (internal standard) is specified when using the internal standard method For the calculation method of correction factor, add chromatogram A.1 (see Appendix A, Appendix A of the.2008 edition). Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Chemical Standardization Technical Committee (SAC/TC63). This document is drafted by. China Petroleum & Chemical Corporation Shanghai Petrochemical Research Institute, Shanghai Secco Petrochemical Co., Ltd. Company, Sinopec Shanghai Petrochemical Co., Ltd. The main drafters of this document. Zhong Ming, Li Jiwen, Jiang Liyan, Liu Zhaoxia, Ge Qinfen, Bai Yanhua, Wang Chuan. This document was first published in 1987, revised for the first time in.1994, and revised for the second time in.2008, this time being the third revision.IntroductionGB/T 7717 "Industrial Acrylonitrile" includes product standards and supporting method standards for industrial acrylonitrile. In order to facilitate management and use, It consists of the following parts. --- Part 1.Specifications. It specifies the product classification, technical requirements and test methods, sampling, inspection rules and standards of acrylonitrile for industrial use. signs, labels and accompanying documents, packaging, transport and storage. --- Part 5.Determination of acidity, pH value and titration value. Determination of acidity by chemical titration; pH measurement by pH meter; Potentiometric drop Determine the titer value. --- Part 8.Determination of total aldehyde content Spectrophotometric method. It is the reaction of total aldehydes and derivatizing reagents to produce colored anionic dyes. The absorbance value was measured, and the total aldehyde content was calculated. --- Part 9.Determination of total cyanide content by titration. The cyanide in the sample is extracted with an alkaline solution of potassium iodide to make it soluble The total cyanide content was calculated by titration with silver nitrate standard titration solution. --- Part 10.Spectrophotometric method for the determination of peroxide content. Under the action of acetic anhydride, peroxide reacts with potassium iodide Yellow iodide ions should be generated, and the content of peroxide is calculated by measuring the absorbance value of the solution. --- Part 11.Determination of iron and copper content by spectrophotometry. Evaporate the sample to dryness and digest with mixed acid to remove organic matter, and iron After the ion and copper ions react with the derivatizing reagent respectively, a colored complex is formed, which is measured with a spectrophotometer, and the iron and copper are calculated. content. --- Part 12.Determination of purity and impurity content by gas chromatography. is the determination of the purity of acrylonitrile samples by gas chromatography and impurity content. --- Part 15.Determination of p-hydroxyanisole content. Including spectrophotometry and gas chromatography. where spectrophotometry uses The absorbance of the sample was directly measured at 295 nm by an ultraviolet spectrophotometer, and the content of p-hydroxyanisole was calculated; gas chromatography method The content of p-hydroxyanisole was separated and determined by gas chromatography. --- Part 16.Determination of iron and copper content by graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry. of which stone Ink furnace atomic absorption spectrometry is to measure the absorbance at the characteristic wavelengths of iron and copper after diluting the sample with ethanol. Calculate the iron and copper content; inductively coupled plasma mass spectrometry is to dilute the sample with ethanol, add the internal standard solution, and use iron and copper. The characteristic mass of the mass spectrometer was collected, and the iron and copper contents were calculated. Industrial Acrylonitrile Part 12.Determination of purity and impurity content gas chromatography Caution - This document is not intended to address all safety issues related to its use. It is the user's responsibility to take appropriate safety and Health measures to ensure compliance with the relevant state regulations.1 ScopeThis document specifies a gas chromatographic method for the determination of the purity and impurity content of acrylonitrile for industrial use. These impurities include acetaldehyde, acetone, propylene Aldehyde, benzene, methacrylonitrile, acetonitrile, azole, propionitrile, cis-butenenitrile and trans-butenenitrile, etc. This document is applicable to the determination of acrylonitrile samples with a purity of not less than 99% (mass fraction), of which condition 1 in Table 1 is suitable for the content of not less than 99% (mass fraction). For the determination of impurities at 10.0 mg/kg and the purity of acrylonitrile, Condition 2 applies to impurities with a content of 2.0 mg/kg to 10.0 mg/kg (A other than acrylonitrile).2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 3723 General Rules for Sampling Safety of Chemical Products for Industrial Use GB/T 6283 Determination of moisture content in chemical products Karl Fischer method (general method) GB/T 6324.8 Test methods for organic chemical products - Part 8.Determination of moisture in liquid products - Karl Fischer Coulomb coulometric method GB/T 6680 General Rules for Sampling of Liquid Chemical Products GB/T 7717.5 Industrial Acrylonitrile Part 5.Determination of Acidity, pH Value and Titration Value GB/T 7717.15 Industrial Acrylonitrile Part 15.Determination of p-Hydroxyanisole content GB/T 8170 Numerical Rounding Rules and Representation and Judgment of Limit Values3 Terms and DefinitionsThere are no terms and definitions that need to be defined in this document.4 Method summary4.1 Internal standard method The acrylonitrile sample added with the internal standard was vaporized and passed through a capillary chromatographic column to separate the components to be determined and detected by hydrogen flame ionization. The chromatographic peak area of each component was recorded, and the content of each impurity was calculated by the internal standard method. Acrylonitrile purity by 100.00% (quality Deduct the impurities determined in this document and the moisture, acidity and total amount of p-hydroxyanisole determined by other methods. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7717.12-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 7717.12-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7717.12-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7717.12-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7717.12-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7717.12-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
