GB/T 7672.6-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7672.6-2008: Glass-fiber wound winding wires -- Part 6: Glass-fiber and film wound rectangular copper wire
Status: Valid

GB/T 7672.6: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7672.6-2008	189	Add to Cart	3 days	Glass-fiber wound winding wires -- Part 6: Glass-fiber and film wound rectangular copper wire	Valid
GB/T 7672.6-1987	199	Add to Cart	2 days	Glass-fiber covered winding wires--Part 6: Glass-fiber covered filmcovered rectangular wires	Obsolete

Similar standards

GB/T 4074.21   GB/T 4074.3   GB/T 7095.1   GB/T 7672.3   GB/T 7672.4   GB/T 7672.2   

Basic data

Standard ID: GB/T 7672.6-2008 (GB/T7672.6-2008)
Description (Translated English): Glass-fiber wound winding wires -- Part 6: Glass-fiber and film wound rectangular copper wire
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K12
Classification of International Standard: 29.060.10
Word Count Estimation: 8,870
Date of Issue: 2008-06-30
Date of Implementation: 2009-05-01
Older Standard (superseded by this standard): GB/T 7672.6-1987
Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the impregnated, bare, film wrapped copper flat wire requirements. Impregnated, bare, thin sintered copper flat wire wrapping is not included within the scope of this section. Broadside Size: Minimum 2. 00mm, max 16. 00mm, Narrow Size: Minimum 0. 80mm, max 5. 60mm. Broadside size and narrow size combinations and ratios for GB/T 7672. 1-2008 requirements.

GB/T 7672.6-2008: Glass-fiber wound winding wires -- Part 6: Glass-fiber and film wound rectangular copper wire

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Glass-fiber wound winding wires Part 6. Glass-fiber and film wound rectangular copper wire ICS 29.060.10 K12 National Standards of People's Republic of China Replacing GB/T 7672.6-1987 Fiber covered winding wire Part 6. Glass film wound flat copper wire Posted 2008-06-30 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 7672 "fiber covered winding wire" is divided into 15 parts. --- Part 1. Glass pack flat copper winding wire - General requirements; --- Part 2. 130 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 3. 155 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 4. 180 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 5.200 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 6. Glass film wound flat copper wire; --- Part 7. Glass - fiber mica wrapped flat copper wire (under consideration); --- Part 8. glass film wound sintered copper flat wire (under consideration); --- Part 9. polyester fibers and fiber wound copper flat wire and enamelled copper flat wire (under consideration); --- Part 12. Self-adhesive glass package winding copper flat wire (under consideration); --- Part 21. Glass round copper wire - General requirements; --- Part 22. 155 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 23. 180 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 24.200 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 25. Glass - fiber covered film wrapped round copper wire (under consideration). This section GB/T Section 67672 of. This Part replaces GB/T 7672.6-1987 "fiber covered winding wires - Part 6. Glass film wound flat wire." This section compared with the GB/T 7672.6-1987, the main changes are as follows. --- Increasing the temperature index of 200 for the new product; --- Part 2 of Table 2 insulation nominal thickness while retaining the GB/T 7672.6-1987 specified in Table 2 of 0.40mm, 0.50mm and 0.60mm, etc., based on the additional increase of 0.20mm, 0.30mm, 0.70mm, 0.80mm and 0.90mm five dimensions; --- Part 8 increased the resilience of the product assessment, specify the maximum springback angle product does not exceed 5.5 °; --- Provisions of this Part Chapter 14 by the number of sample breakdown voltage test five, GB/T 7672.6-1987 to the provisions of Article 4.3 By number of samples breakdown voltage test for four; this section in Table 4 insulation nominal thickness of 0.50mm and 0.60mm When the withstand voltage level product unified 5000V, and GB/T 7672.6-1987 in Table 4 are nominal thickness of the insulation 0.50mm, the withstand voltage level of 4500V, insulation nominal thickness of 0.60mm, the withstand voltage level of 5500V. In addition the Section Table 4 also adds insulation nominal thickness of 0.20mm, 0.30mm, 0.70mm, 0.80mm, 0.90mm intrapartum Voltage performance products resistance requirements. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of wire and cable. This part mainly drafted by. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Shanghai Shen Mao Wire Factory, Changshu Hao Wei Fu Group Co., Ltd. Panyu SUNTEN at public Secretary, Wuxi Universal Wire Co., Ltd., Shandong Wanda Wire Factory. The main drafters of this section. Zhang Jingping, Song An, Mao Weijie, Gu Xinmei, Wang Juan, Pakistan Yuguo, Dai Tao. This part of the standard replaces the previous editions are. --- GB/T 7672.6-1987; --- GB 1342-1977. Fiber covered winding wire Part 6. Glass film wound flat copper wire

1 Scope

GB/T 7672 provisions of this part of the impregnated, bare, copper-clad film wound flat wire requirements. Impregnated, bare film about Shao Jie Copper flat wire package is not included within the scope of this section. --- Broadside size. minimum 2.00mm, maximum 16.00mm; --- Narrow size. minimum 0.80mm, maximum 5.60mm. A combination of size and narrow broadside sizes and ratios see GB/T 7672.1-2008 provisions of.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 7672 constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 4074.1 Winding wires test methods - Part 1. General requirements (GB/T 4074.1-2008, IEC 60851-1.1996, IDT) GB/T 4074.2 Winding wires test methods - Part 2. Measure (GB/T 4074.2-2008, IEC 60851-2.1997, IDT) GB/T 4074.3 Winding wires test methods - Part 3. Mechanical properties (GB/T 4074.3-2008, IEC 60851-3.1997, IDT) GB/T 4074.5-2008 Winding wires - Test methods - Part 5. Electrical properties (IEC 60851-5.2004, IDT) GB/T 7672.1-2008 fiber covered winding wires - Part 1. Glass pack flat copper winding wire - General requirements (IEC 60317-0-4. 2006, IDT) GB/T 7672.2 fiber covered winding wires - Part 2. 130 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire GB/T 7672.3 fiber covered winding wires - Part 3. 155 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire (GB/T 7672.3-2008, IEC 60317-32.1990, IDT) GB/T 7672.4 fiber covered winding wires - Part 4. 180 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire (GB/T 7672.4-2008, IEC 60317-31.1990, IDT) GB/T 7672.5 fiber covered winding wires - Part 5.200 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire (GB/T 7672.5-2008, IEC 60317-33.1990, IDT) 3 Definitions, test methods and General Appearance 3.1 Overview In addition to the definition of this part of GB/T 7672 provisions of, the other is defined in GB/T 7672.1-2008 in 3.1. General test method see GB/T 7672.1-2008 in 3.2. If GB/T 7672.1-2008 in this section are contradictory to this section shall prevail. 3.2 definitions Define the maximum thickness of any thin plastic, the thickness is much smaller than its length and width, typically with rolls. Note. The maximum thickness limit is generally several hundred microns. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7672.6-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7672.6-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7672.6-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7672.6-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7672.6-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7672.6-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.