GB/T 7672.24-2008 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7672.24-2008: Glass-fiber wound winding wires -- Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7672.24-2008	114	Add to Cart	3 days	Glass-fiber wound winding wires -- Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200	Valid

Similar standards

GB/T 4074.21   GB/T 4074.3   GB/T 7095.1   GB/T 7672.23   GB/T 7672.4   GB/T 7672.22   

Basic data

Standard ID: GB/T 7672.24-2008 (GB/T7672.24-2008)
Description (Translated English): Glass-fiber wound winding wires -- Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K12
Classification of International Standard: 29.060.10
Word Count Estimation: 6,625
Date of Issue: 2008-06-30
Date of Implementation: 2009-05-01
Adopted Standard: IEC 60317-50-1999, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the temperature index of 200, impregnated, bare round copper wire and impregnated, bare, one or two film thickness enamelled round copper wire requirements. Wherein the varnish, for example, or a silicone resin, a polyester imide varnish.

GB/T 7672.24-2008: Glass-fiber wound winding wires -- Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Glass-fiber wound winding wires Part 24. Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 ICS 29.060.10 K12 National Standards of People's Republic of China GB/T 7672.24-2008/IEC 60317-50.1999 Fiber covered winding wire Part 24.200 impregnated, bare copper wire and Glass-fiber covered enameled copper wire (IEC 60317-50.1999, Specificationsforparticulartypesofwindingwires- Part 50. Glass-fiberwoundresinorvarnishimpregnated, bareor enameledroundcopperwire, temperatureindex200, IDT) Posted 2009-05-01 2008-06-30 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 7672 "fiber covered winding wire" is divided into 15 parts. --- Part 1. Glass pack flat copper winding wire - General requirements; --- Part 2. 130 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 3. 155 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 4. 180 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 5.200 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 6. Glass film wound flat copper wire; --- Part 7. Glass - fiber mica wrapped flat copper wire (under consideration); --- Part 8. glass film wound sintered copper flat wire (under consideration); --- Part 9. polyester fibers and fiber wound copper flat wire and enamelled copper flat wire (under consideration); --- Part 12. Self-adhesive glass package winding copper flat wire (under consideration); --- Part 21. Glass round copper wire - General requirements; --- Part 22. 155 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 23. 180 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 24.200 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 25. Glass - fiber covered film wrapped round copper wire (under consideration). This part of GB/T 7672 of Part 24. This section identical with IEC 60317-50.1999 "Standard winding wires - Part 50. Temperature Index 200 glass package, resin Or paint adhesion, bare or enamelled round copper wire, "the first edition (in English). For ease of use, this section made the following editorial changes. --- Remove the IEC 60317-50.1999 Foreword and Introduction; --- According to IEC 60317-0-6.2007 "Standard winding wires - Part 0-6. Glass pack, paint or resin bonded, bare or enamelled Round copper wire - General requirements "standard, the IEC 60317-50.1999 Chapter 1 of G2 to GL2, Grade1G1 and Grade1G2 to Grade1GL1 and Grade1GL2, Grade2G1 and Grade2G2 to Grade2GL1 And Grade2GL2. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of wire and cable. This part mainly drafted by. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Wuxi City Island Wire Co., Ltd., Shanghai Shen Mao Wire Factory, Shanghai Yusheng Special Wire Co. Division, four Chuan Jinrui electrician limited liability company. The main drafters of this section. SONG Xu Jin method, Yuan Qiong, Shaowu Jun, Wang camp, Mao Weijie, Zhang Jingping. This section first release. GB/T 7672.24-2008/IEC 60317-50.1999 Fiber covered winding wire Part 24.200 impregnated, bare copper wire and Glass-fiber covered enameled copper wire

1 Scope

GB/T 7672 provisions of this part of the temperature index 200, impregnated, bare copper wire and impregnated, bare, grade 1 or 2 film Enameled copper wire thickness requirements. Wherein varnish, for example, polyester imide or silicone varnish. Note. For this type of wire, thermal shock test is not applicable, the thermal shock temperature can not be determined. Therefore, the index can not be predetermined based on temperature and thermal shock temperature requirements Level. One wire should be based on the following criteria. GB/T 6109.20-2008 or GB/T 6109.22-2008, and advised by both parties OK consultations. Temperature index glass round copper wire depends on the type of varnish used. The varnish impregnated glass fiber should have a minimum 200 temperature index. Glass cladding can be. a) a single glass envelope; b) In contrast double glass envelope, two fiber wound direction. This section conductor nominal diameter range is as follows. --- On the bare conductor wrapped double glass (GL2). from 0.500mm to and including 5.000mm; --- On level 1 film thickness wire wrapped glass (Grade1GL1 and Grade1GL2). from 0.500mm to and including 1.600mm; --- On level 2 film thickness wire wrapped glass (Grade2GL1 and Grade2GL2). from 0.500mm to and including 5.000mm. Nominal conductor diameter see the provisions of GB/T 7672.21-2008 in Chapter 4.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 7672 constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Part 20 GB/T 6109.20-2008 enamelled round winding line.200 polyamide imide or polyester imide varnish Round copper wire (IEC 60317-13.1997, IDT) GB/T 6109.22-2008 enamelled round winding wires - Part 22. 240 aromatic polyimide enamelled round copper wire (IEC 60317- 46.1997, IDT) General provisions glass round copper wire. GB/T 7672.21-2008 fiber covered winding wires - Part 21 (IEC 60317-0-6.2007, IDT)

3 General definitions and test methods

General definitions and test methods see GB/T 7672.21-2008 in Chapter 3. If GB/T 7672.21-2008 in this section are contradictory to this section shall prevail. GB/T 7672.24-2008/IEC 60317-50.1999 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7672.24-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7672.24-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7672.24-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7672.24-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.