GB/T 7672.1-2008 English PDF

US$514.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7672.1-2008: Glass-fiber wound winding wires -- Part 1: Glass-fiber wound rectangular copper wire -- General requirements
Status: Valid

GB/T 7672.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7672.1-2008	514	Add to Cart	4 days	Glass-fiber wound winding wires -- Part 1: Glass-fiber wound rectangular copper wire -- General requirements	Valid
GB/T 7672.1-1987	519	Add to Cart	4 days	Glass-fiber covered winding wires--Part 1: General	Obsolete

Similar standards

GB/T 4074.21   GB/T 4074.3   GB/T 7095.1   GB/T 7672.4   GB/T 7672.5   GB/T 7672.3   

Basic data

Standard ID: GB/T 7672.1-2008 (GB/T7672.1-2008)
Description (Translated English): Glass-fiber wound winding wires -- Part 1: Glass-fiber wound rectangular copper wire -- General requirements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K12
Classification of International Standard: 29.060.10
Word Count Estimation: 26,283
Date of Issue: 2008-06-30
Date of Implementation: 2009-05-01
Older Standard (superseded by this standard): GB/T 7672.1-1987
Adopted Standard: IEC 60317-0-4-2006, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the impregnated, bare copper flat wire or impregnated, bare or enamelled copper flat wire for general requirements. Conductor nominal size range, see the relevant product standard (product model and labeling see Appendix C). When the reference mentioned in Chapter 2 GB/T 7672. 3, GB/T 7672. 4 and GB/T 7672. 5 in one standard glass envelope, should be given the following contents: -GB number and/or IEC Code, conductor nominal size (dimension X broadside narrow dimension) mm, paint and silk cladding thickness class.

GB/T 7672.1-2008: Glass-fiber wound winding wires -- Part 1: Glass-fiber wound rectangular copper wire -- General requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Glass-fiber wound winding wires Part 1. Glass-fiber wound rectangular copper wire General requirements ICS 29.060.10 K12 National Standards of People's Republic of China GB/T 7672.1-2008/IEC 60317-0-4.2006 Replacing GB/T 7672.1-1987 Fiber covered winding wire Part 1. Glass pack flat copper winding wires General provisions (IEC 60317-0-4.2006, Specificationsforparticulartypesofwinding wires-Part0-4. Generalrequirements-Glass-fibrewoundresinor varnishimpregnated, bareorenameledrectangularcopperwire, IDT) Posted 2009-05-01 2008-06-30 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 7672 "fiber covered winding wire" is divided into 15 parts. --- Part 1. Glass pack flat copper winding wire - General requirements; --- Part 2. 130 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 3. 155 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 4. 180 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 5.200 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire; --- Part 6. Glass film wound flat copper wire; --- Part 7. Glass - fiber mica wrapped flat copper wire (under consideration); --- Part 8. glass film wound sintered copper flat wire (under consideration); --- Part 9. polyester fibers and fiber wound copper flat wire and enamelled copper flat wire (under consideration); --- Part 12. Self-adhesive glass package winding copper flat wire (under consideration); --- Part 21. Glass round copper wire - General requirements; --- Part 22. 155 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 23. 180 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 24.200 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire; --- Part 25. Glass - fiber covered film wrapped round copper wire (under consideration). This section GB/T 17672 Part of. This section identical with IEC 60317-0-4.2006 "Standard winding wires - Part 0-4. Glass pack, paint or resin bonded bare Or enamelled copper flat wire - General requirements "Version 2.2 (in English). For ease of use, this section made the following editorial changes. --- Remove the IEC 60317-0-4.2006 Foreword and Introduction; --- Chapter 2 applicable to the use of standard quotations removed IEC 60317-0-4.2006 quotations; --- Increase the informative appendix C, listed IEC 60317-0-4.2006 product model representation and domestic production and adapt to this Product model representation, and product marking in addition to increased product models outside the conductor size and specific product standard number, etc., and GB/T 7672.1-1987 consistent; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Increase the informative appendix D "pilot project category." This part identical with IEC 60317-0-4.2006 Fixed the description of several editorial errors. These amendments are as follows. --- IEC 60317-0-4.2006 revised table insulation type code associated with product standards within 4 is consistent with its Tables 7 and Table B. 1 insulating type code error, you should Table 7 GradeG1 to GL1, GradeG2 to GL2, Grade2G1 to Grade2GL1, Grade2G2 to Grade2GL2, but also should table B. 1 Grade 2G1 to Grade2GL1, Grade2G2 to Grade2GL2, this section has been amended accordingly. This Part replaces GB/T 7672.1-1987 "fiber covered winding wires - Part 1. General requirements." This section compared with the GB/T 7672.1-1987, the main changes are as follows. --- Product Scope. This section is deleted GB T 7672.1-1987 regarding content and round wire/aluminum flat wire; --- Categories. GB/T 7672.1-1987 structure by product category, according to this part of the heat level classification. This section of the Appendix A, Appendix B, Appendix C and Appendix D is an informative annex. This part is proposed by the China Electrical Equipment Industrial Association. GB/T 7672.1-2008/IEC 60317-0-4.2006 This part of the National Standardization Technical Committee of wire and cable. This part mainly drafted by. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Shanghai Shen Mao Wire Factory, Changshu Hao Wei Fu Group Co., Ltd., Wuxi City-Chau Electromagnetic Wire Co., Four Chuan Jinrui Electric Co., Ltd., Shanghai Yusheng Special Wire Co., Ltd. The main drafters of this section. Zhang Jingping, Mao Weijie, SONG, Guxin Mei, Xu Jin method, Yuan Qiong, Shaowu Jun. This part of the standard replaces the previous editions are. --- GB/T 7672.1-1987; --- GB 1342-1977. GB/T 7672.1-2008/IEC 60317-0-4.2006 Fiber covered winding wire Part 1. Glass pack flat copper winding wires General provisions

1 Scope

GB/T 7672 this part of the general requirements impregnated, bare copper flat wire or impregnated, bare or enamelled copper flat wire. Conductor nominal size range in the relevant product standards (see product model and labeled Appendix C). When GB references mentioned in Chapter 2/T 7672.3, GB/T 7672.4 and GB/T 7672.5 in one standard glass envelope , Should be given the following. --- GB number and/or IEC number; --- Conductor nominal size (narrow broadside size × size), mm; --- Paint and silk cladding thickness class. Example. GB/T 7672.4-2008 1.00 × 4.00 Grade2GL1 or IEC 60317-314.00 × 1.00Grade2GL1

2 Normative references

The following documents contain provisions which, through GB/T reference in this 7672 constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 321-2005 priority number and priority number system (ISO 3. 1973, IDT) GB/T 4074.1 Winding wires test methods - Part 1. General requirements (GB/T 4074.1-2008, IEC 60851-1.1996, IDT) GB/T 4074.2 Winding wires test methods - Part 2. Measure (GB/T 4074.2-2008, IEC 60851-2.1997, IDT) GB/T 4074.3 Winding wires test methods - Part 3. Mechanical properties (GB/T 4074.3-2008, IEC 60851-3.1997, IDT) GB/T 4074.4 Winding wires test methods - Part 4. Chemical properties (GB/T 4074.4-2008, IEC 60851-4.2005, IDT) GB/T 4074.5 Winding wires - Test methods - Part 5. Electrical properties (GB/T 4074.5-2008, IEC 60851-5.2004, IDT) GB/T 4074.6 Winding wires - Test methods - Part 6. Thermal properties (GB/T 4074.6-2008, IEC 60851-6.1996, IDT) GB/T 7672.3 fiber covered winding wires - Part 3. 155 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire (GB/T 7672.3-2008, IEC 60317-32.1990, IDT) GB/T 7672.4 fiber covered winding wires - Part 4. 180 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire (GB/T 7672.4-2008, IEC 60317-31.1990, IDT) GB/T 7672.1-2008/IEC 60317-0-4.2006 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7672.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7672.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7672.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7672.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7672.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7672.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.