GB/T 7593-2008 English PDFUS$1174.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7593-2008: Powered industrial trucks -- Symbols for operator controls and other displays Status: Valid GB/T 7593: Historical versions
Basic dataStandard ID: GB/T 7593-2008 (GB/T7593-2008)Description (Translated English): Powered industrial trucks -- Symbols for operator controls and other displays Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J83 Classification of International Standard: 53.060 Word Count Estimation: 59,593 Date of Issue: 2008-07-09 Date of Implementation: 2009-02-01 Older Standard (superseded by this standard): GB/T 7593-1987 Quoted Standard: IEC 80416-1-2001; ISO 80416-2 Adopted Standard: ISO 3287-1999, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the symbols displayed on the device and other devices powered industrial vehicle drivers to control use. GB/T 7593-2008: Powered industrial trucks -- Symbols for operator controls and other displays---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Powered industrial trucks. Symbols for operator controls and other displays ICS 53.060 J83 National Standards of People's Republic of China GB/T 7593-2008/ISO 3287.1999 Replacing GB/T 7593-1987 Powered industrial vehicle operator control device and Other displays - Symbols (ISO 3287.1999, IDT) Posted 2008-07-09 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 1 General 5 color 2 6 Basic Symbols 2 7 brake system symbols 6 8 cab symbol 7 9 driving control symbols 11 10 12 engine symbol 11 16 Electrical System Symbol 12 17 Fuel Symbol 13 transmission symbols 18 14 hydraulic system symbols 19 Lighting 20 15 Symbol 16 22 Maintenance symbols 17 load handling control symbols 24 Chinese index 41 English 48 Index References 55 GB/T 7593-2008/ISO 3287.1999ForewordThis standard is identical with ISO 3287.1999 "industrial motor vehicle driver control devices and other display devices with the symbol" (English Chinese Version). This standard is equivalent translation ISO 3287.1999. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "of this standard." --- Deleted international standards foreword. --- ISO 3287.1999 international standard referenced in ISO 3461-1. 1988 and ISO 4196, due to the ISO 3461-1. 1988 has been IEC 80416-1.2001 in place, ISO 4196 has been ISO 80416-2.2001 in place, therefore, converted to our standards, With IEC 80416-1.2001 instead of the original standard ISO 3461-1. 1988, ISO 80416-2 replaced with ISO 4196. in Chapter 2 normative references and specific clauses in the corresponding modifications were done. --- Original international standard 4.3 "See ISO 3461-1. 1988 10.3" to "see IEC 80416-1.2001 in Chapter 8." --- The references cited in ISO 7000. 1989 with the latest version of ISO 7000.2004 instead of the IEC 417. 1973 with IEC 60417-DB instead. --- Deleted Appendix A, an increase of Chinese index. This standard replaces GB/T 7593-1987 "powered industrial vehicle control symbols." The main changes compared to 7593-1987 standard and GB/T as follows. --- Increased Chapter 2, "Normative references"; --- Increased Chapter 3, "Terms and Definitions"; --- Increase the Chapter 4, "General Provisions"; --- Increased Chapter 5, "Color"; --- Delete the original standard in Chapter 3, "Cargo handling symbols Usage", Chapter 5, "relates to the operation of the other steering control symbols Usage" and Chapter 7, "or identifying information is only used to indicate the use of symbols." --- Original standard press "Cargo handling symbols," "other operations related to the operation of control symbols" and "only used to indicate information or identified The symbol "three-part classification prescribed by this standard to control symbol" basic symbol "," brake system symbol "," cab operator No. "," driving control symbol "," engine symbol "," Electrical system symbol "," Fuel symbol "," transmission symbol "," hydraulic system Symbol "," illuminated sign "," Maintenance symbol "," load handling control symbols "second part of the classification prescribed operation control character Number and other pictorial symbols; --- The standard total provisions symbol 235, an increase of 162 symbols than the original standard; --- Deleted Appendix A; --- Added "Chinese index" and "English index." The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee Vehicle (SAC/TC332) centralized. This standard is drafted by. Beijing Materials Handling Research Institute. Participated in the drafting of this standard. Zhejiang Connaught Machinery Co., Ltd. The main drafters of this standard. Zhao Chunhui. This standard replaces the standards previously issued as follows. --- GB/T 7593-1987. GB/T 7593-2008/ISO 3287.1999 Powered industrial vehicle operator control device and Other displays - Symbols1 ScopeThis standard specifies the symbols on the display device and other devices powered industrial vehicle driver controlled use.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. IEC 80416-1.2001 Basic principles for graphical symbols for equipment - Part 1. Initial symbol of the establishment ISO 80416-2 Basic principles for graphical symbols for equipment - Part 2. Form and use of arrows3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Do not rely on language to transmit information, it can be visually perceived graphics. Note. The graphics can be drawn, printed, or made by other methods.4 General4.1 This standard symbols shall be as shown in the following chapters bar. However, with respect to the symbol outline form represented, with the exception otherwise stated in Dissecting the actual use to fill in order to improve clarity and perception of its visual driver replication. 4.2 Because some replication and display technologies have inherent limitations, you may need to increase the width of the lines or symbols to make some minor changes move. As long as the symbol has not changed in terms of basic graphic elements, and the driver is easy to see that this change is permitted. 4.3 In order to improve the appearance of the graphical symbols and improve their perception, or to use the symbol of the equipment and coordination structure relative can The symbol line width mutandis or symbols were rounding the corner. Substantive cognitive properties as long as the graphical symbols can still guarantee Left, the graphic designer is free to make such changes. See IEC 80461-1.2001 in Chapter 8. 4.4 actual use, all the symbols should be made large enough size, easy to identify the driver. About the Symbols for size guide see IEC 80416-1. When used, the symbol of this standard shall be as shown toward individual symbols unless otherwise stated. 4.5 Most symbols are composed using a modular approach, rational combination of different symbols and the upcoming elements constituting the new symbol. 4.6 If a symbol shows a side view of a machine or its parts, it is assumed that the machine in the symbol grid area is from right to left movement. Such as If the symbol of a machine or a part of a plan view, it is assumed that the machine in the symbol grid area is the movement from the bottom up. 4.7 controls and display symbols on the device with respect to their substrate should have good contrast. For most of the control device He said that priority should be given with deep background with light symbol. For a display device, can be deep or shallow background with a light-colored background with dark symbol symbols, see Which program better visual effect. If you change the color of a symbol image (for example, by a black and white black white chart or diagram to the contrary), All symbols should make the same change. 4.8 symbols should be located in the control apparatus described or displayed on the device or in its vicinity. When a control device need to use a plurality of symbols, they are relatively Distributed in the position of the control device should be, when the control device in the direction of movement of the symbol shown in the function the symbol described it to take effect. GB/T 7593-2008/ISO 3287.1999 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7593-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 7593-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7593-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7593-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7593-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7593-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
