GB/T 7586-2018 English PDFUS$839.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7586-2018: Earth-moving machinery -- Hydraulic excavators -- Test methods Status: Valid GB/T 7586: Historical versions
Basic dataStandard ID: GB/T 7586-2018 (GB/T7586-2018)Description (Translated English): Earth-moving machinery -- Hydraulic excavators -- Test methods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Classification of International Standard: 53.100 Word Count Estimation: 42,443 Date of Issue: 2018-12-28 Date of Implementation: 2019-07-01 Older Standard (superseded by this standard): GB/T 7586-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 7586-2018: Earth-moving machinery -- Hydraulic excavators -- Test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Earth--moving machinery--Hydraulic excavators--Test methods ICS 53.100 P97 National Standards of People's Republic of China Replace GB/T 7586-2008 Earthmoving machinery hydraulic excavator test method Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Preparation before the test 2 5 set test 3 6 Determination of tipping moment 5 7 Determination of digging force 7 8 driving performance test 7 9 slewing test 10 10 Noise measurement 12 11 Vibration test 12 12 weight test 13 13 Determination of exhaust pollutants 13 14 Fuel consumption rate test 13 15 Air Conditioning Refrigerant Test 13 16 Tests for lighting, signal and marker lights and reflectors 13 17 Test of forward and reverse audible alarm sound 13 18 Monitoring of mirrors and mirrors 13 19 Test of driver protection devices 13 20 Trial excavator tipping protection structure (TOPS) and rollover protection structure (ROPS) test for excavators over 6t 13 21 Test of the cab environment 13 22 Excavator operation test 14 23 Strength test 15 24 dry run test 16 25 Hydraulic System Test 16 26 Other safety requirements test 20 27 Reliability Test 20 Appendix A (informative) Excavator technical parameters table 21 Appendix B (informative) Excavator test record table 23ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 7586-2008 "Test Method for Hydraulic Excavators". This standard is compared with GB/T 7586-2008, except for editing The main technical changes outside the series are as follows. --- Revised the scope of the standard (see Chapter 1, Chapter 1 of the.2008 edition); --- Delete, modify, and add normative references (see Chapter 2, Chapter 2 of the.2008 edition); --- Revised the normative references to the terms and definition references (see Chapter 3, Chapter 3 of the.2008 edition); --- Revised preparations before the test (see Chapter 4, Chapter 4 of the.2008 edition); --- Revised the rules of the test site and summarized them in a clause (see 4.4, Chapter 5, Chapter 6 of the.2008 edition, Chapter 8, Chapter 9, Chapter 20 ~ Chapter 23); --- Removed the provisions of the equipment (see Chapter 5, Chapter 6, Chapter 8, Chapter 9, Chapter 20 ~ Chapter 23 of the.2008 edition); --- Modified the grounding specific pressure of the crawler excavator (see 5.6.1, 5.6.1 of the.2008 edition); --- Revised the test method for climbing ability (see 8.4, 8.4 of.2008 edition); --- Revised the test method for noise measurement (see Chapter 10, Chapter 10 of the.2008 edition); --- Revised the test method for vibration test (see Chapter 11, Chapter 11 of the.2008 edition); --- Removed electrical equipment and system tests (see Chapter 13 of the.2008 edition); --- Modified the determination of exhaust pollutants (see Chapter 13, Chapter 14 of the.2008 edition); --- Increased fuel consumption test and air conditioning refrigerant test provisions (see Chapters 14 and 15); --- Revised the provisions of the cab environment test (see Chapter 21, Chapter 19 of the.2008 edition); --- Adding provisions for testing of other safety requirements (see Chapter 26); --- Change the "industrial test" to "reliability test" and modify the provisions of the test (see Chapter 27,.2008 edition) Chapter 24); --- Change Appendix A from "normative appendix" to "informative appendix", delete Table A.2 and Table A.3, and modify the name of the appendix (See Appendix A, Appendix A of the.2008 edition); --- Change Appendix B from "normative appendix" to "informative appendix", delete Tables B.8, B.19, B.30, B.31 and B.32, modified The climbing ability test record table (see Appendix B, Appendix B of the.2008 edition). This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334). This standard is drafted by. Tianjin Engineering Machinery Research Institute Co., Ltd., Guangxi Liugong Machinery Co., Ltd., Fujian Province Special Design Prepared Inspection and Inspection Institute, Qingdao Leiwo Construction Machinery Co., Ltd., Linyishan Heavy Excavator Co., Ltd., Shandong Carter Heavy Industry Machinery Co., Ltd., Mountain River Intelligent Equipment Co., Ltd., Guangxi Yuchai Heavy Industry Co., Ltd., Yantai Aidi Hydraulic Technology Co., Ltd. Participated in the drafting of this standard. Xiamen Xiagong Machinery Co., Ltd., Sany Heavy Machinery Co., Ltd., China Longgong Holdings Co., Ltd. The main drafters of this standard. Jia Xiaowen, Wu Hongli, Xiao Qingsong, Ji Weijiang, Wang Bin, Sun Fengchao, Zhong Yuzhu, Yang Zhimin, Yan Maolin, Xu Shangwu, Li Shengyu, Yu Hongfu, Chen Shiqing. The previous versions of the standards replaced by this standard are. ---GB/T 7586-1987, GB/T 7586-1996, GB/T 7586-2008; ---GB/T 10675-1989. Earthmoving machinery hydraulic excavator test method1 ScopeThis standard specifies the performance test method and reliability test method for hydraulic excavators. This standard is applicable to hydraulic excavators (hereinafter referred to as "excavators") with a working quality of not more than.200,000 kg as specified in GB/T 8498. Other sizes of excavators can be used as reference.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 6572 earthmoving machinery hydraulic excavator terminology and commercial specifications Laboratory evaluation of GB/T 8419 earth-moving machinery driver seat vibration GB/T 8498 earthmoving machinery basic type identification, terminology and definition Method for measuring the position of the center of gravity of GB/T 8499 earthmoving machine GB/T 8592 Determination of the steering dimensions of earth-moving machinery and tires GB/T 8595 earthmoving machinery driver's operating device GB/T 9139 earthmoving machinery hydraulic excavator technical conditions GB/T 10913 earthmoving machine speed measurement GB/T 13331 earthmoving machinery hydraulic excavator lifting weight GB/T 13332 Earthmoving machinery hydraulic excavator and backhoe loader measuring method GB/T 16937 earth-moving machinery driver vision test method and performance criteria GB/T 18826 Industrial 1,1,1,2-tetrafluoroethane (HFC-134a) GB/T 19929 Performance requirements and test methods for earth-moving machinery crawler type machine brake systems GB/T 19930 Laboratory test and performance requirements for earthmoving machinery mini excavator tipping protection structure GB/T 19930.2 Laboratory test and performance requirements for protective structures for earthmoving machinery - Part 2. Excavators above 6t Rollover protection structure (ROPS) GB/T 19932 Laboratory test and performance requirements for driver protection devices for earthmoving machinery hydraulic excavators GB/T 19933.2 Earthmoving machinery cab environment - Part 2. Air filter test method GB/T 19933.4 Earthmoving machinery cab environment - Part 4. Test methods for heating, ventilation and air conditioning (HVAC) performance GB/T 19933.5 Earth-moving machinery cab environment - Part 5. Test methods for windshield defrosting systems GB/T 20082 Hydraulic fluid transmission liquid pollution method using optical microscope to measure particle contamination GB/T 20418 earthmoving machinery lighting, signal and sign lights and reflectors GB 20891 Diesel engine exhaust pollutant emission limits and measurement methods for non-road mobile machinery (China's third and fourth stages) GB/T 21152 Performance requirements and test methods for earth-moving or high-speed rubber crawler type machine brake systems GB/T 21153 Earthwork size, performance and parameters of the unit and measurement accuracy GB/T 21154 earthmoving machinery machine and its working device and component quality measurement method GB/T 21155 Earth-moving machinery driving sound alarm device and front horn test method and performance criteria ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7586-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 7586-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7586-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7586-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7586-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7586-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
