Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 7424.2-2008 English PDF

Q: How long will the true-PDF of English version of GB/T 7424.2-2008 be delivered?

Upon your order, we will start to translate GB/T 7424.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 7424.2-2008_English with my colleagues?

Yes. The purchased PDF of GB/T 7424.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 7424.2-2008?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7424.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$1149.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7424.2-2008: Optical fibre cable generic specification -- Part 2: Basic optical cable test procedures
Status: Valid

GB/T 7424.2: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7424.2-2008	1149	Add to Cart	8 days	Optical fibre cable generic specification -- Part 2: Basic optical cable test procedures	Valid
GB/T 7424.2-2002	RFQ	ASK	9 days	The cable general specification -- Part 2: Basic optical test methods	Obsolete

Similar standards

YD/T 2554.1 GB/T 9771.1 GB/T 20186.1 GB/T 7424.20 GB/T 7424.21 GB/T 7424.22

Basic data

Standard ID: GB/T 7424.2-2008 (GB/T7424.2-2008)
Description (Translated English): Optical fibre cable generic specification -- Part 2: Basic optical cable test procedures
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: M33
Classification of International Standard: 33.180.10
Word Count Estimation: 52,587
Date of Issue: 2008-03-31
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 7424.2-2002
Quoted Standard: GB/T 2423.22-2002; GB 5023.2-1997; GB/T 7424.1-2003; GB/T 8170; GB/T 15972.22-2008; GB/T 15972.32; GB/T 15972.46-2008; GB/T 15972.54; YD/T 629; IEC 60544
Adopted Standard: IEC 60794-1-2-2003, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the mechanical properties of the fiber, the environmental performance of each test method and components purposes, samples, equipment, procedures and requirements. This section applies to GB/T 7424. 1 specified disc.

GB/T 7424.2-2008: Optical fibre cable generic specification -- Part 2: Basic optical cable test procedures

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Optical fibre cable generic specification.Part 2. Basic optical cable test procedures ICS 33.180.10 M33 National Standards of People's Republic of China Replacing GB/T 7424.2-2002 Total cable specification Part 2. Basic optical cable test methods (IEC 60794-1-2.2003, Opticalfibrecable- Part 1-2. Genericspecification- Basicopticalcabletestprocedures, MOD) Posted 2008-11-01 2008-03-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 1 General Provisions 4 cable test 3 5 Method E1. tensile properties 4 6 Method E2. Wear 6 Method 7 E3. flattening 8 8 Methods E4. 9 Impact 9 Method E5. Stability has become stripped fiber cable 11 10 Methods E6. repeated bending 12 Methods 11 E7. 14 twist 12 Methods E8. Flexing 16 13 Method E10. bent 17 14 Method E11. bending 18 15 Method E12. anti cut through 18 16 Method E13. 19 shootings 17 Method E17. Rigid 23 18 Method E18. bending under tension (over pulleys test) 26 19 Method E19. Wind Vibration 28 20 Method E20. a circle of 30 properties 21 Methods F1. temperature cycling 31 22 Methods F3. sheath integrity 33 23 Methods F5. seepage 33 24 Methods F6. composite trickle 34 Methods 25 F7. 36 nuclear radiation 26 Methods F8. vapor lock 36 Methods 27 F9. aging 37 28 Methods F10. Hydrostatic 37 29 Method G1. 37 cable bending element 30 Method G2. optical fiber ribbon geometry observation method 38 31 Method G3. fiber ribbons sized pores Regulation Act 39 32 Method G4. fiber ribbons size 39 micrometer law 33 Method G5. fiber ribbons tear (divisibility) 40 34 Method G6. 41 fiber ribbon twist 35 Methods G7. bent cannula 42 36 Methods H1. short circuit current test 43 37 Methods H2. test fiber optic cable along the power lines overhead lightning 46

Foreword

GB/T 7424 "General specification for fiber optic cable" is divided into the following sections. --- Part 1. General; --- Part 2. Basic optical cable test methods. This section GB/T 7424 "General specification for fiber optic cable," Part 2. The partial modification of the use of IEC 60794-1-2.2003 "cable - Part 1-2. Basic optical cable performance test methods", the main difference as follows. --- Chapter 3, "General", the amount of the value according to GB/T 8170 provisions of rounding; monitoring and inspection methods and sampling, according to the domestic market now Conditions specified; --- The IEC in the "definition of 3.3" and 3.6 "graphic symbols and the term" merger section 3.3 "Terms and Definitions" and IEC Text set out in Chapter 29 of the optical fiber ribbon to move the definition of this section; "3.4 standard atmospheric conditions" in the title changed to "test environment article Members and pre-conditions, "added specific provisions are summarized in" GB/T 2421-1999 Environmental testing for electric and electronic products Standard Test atmospheric conditions General "provisions;. Part 1 --- IEC method E14 "composite trickle" should be the environmental performance test methods in this section to F6. IEC method E15 "Analysis Oil and evaporation "is material testing, is not included in this section; --- Method E1 and E3 in method, supplemented with some details and specific data; --- Method E4, the proposed drop height 1m; --- E7 method, the twist angle increases the angle according to the relevant specification; --- The method of E10, the cable if bent determination to "make the ring diameter is reduced to a minimum in the relevant specification" and then Observed; --- The method of E11, the method name plus E11A "wound" for the method E11B plus name "U-bend"; --- Method of F1, increasing the general provisions "shall be samples treated at 20 ℃ ± 5 ℃ 24h" of. This Part replaces 7424.2-2002 GB/T "total cable specification - Part 2. Test methods for basic cable." This section GB/T 7424.2-2002 main differences are as follows. --- 3.4 title from "standard atmospheric conditions" to "test environment condition and pretreatment conditions" and direct reference to GB/T 2421- Specific provisions 1999; --- Cancel "3.6 graphic symbols and terms", the following entry number cis Save; --- 3.8 to 3.7, an increase of specific content; --- Increase the Chapter 4, "cable test" in order to IEC 60794-1-2.2003 same. This chapter describes the methods in this section number Happening. After a number of chapters postponed; --- Method E7 torsional angle increases the recommended value "± 180 °"; --- Method E13 is divided into two methods E13A and E13B. E13A original content is basically the same, but the point of impact on the number removed Limiting the amount of. E13B for newly added method; --- Method E18 E18A and E18B divided into two methods, procedures by the two increased to four. Increased local bending and single A plurality of local bending program; --- Method E19 "Wind Vibration" to develop the details, it is equivalent to using IEC 60794-1-2.2003 Method E19; --- Increased and developed a method of E20 "looped performance," the details of which identical with IEC 60794-1-2.2003 square Method E20; --- F6 pretreatment method limits the "cable sample of the total mass of 0.5% or 0.5g" to the smaller of the two; --- Increased and developed a method of F10 "hydrostatic pressure" and its details, it is identical with IEC 60794-1-2.2003 square France F10; --- Increased and developed a method for H1 "short circuit current test" and its specific content, it is identical with IEC 60794-1-2.2003 in Methods H1; --- Increased and developed a method for H2 "along the cable overhead power lines lightning test" and its specific content, it is tantamount to the adoption IEC 60794-1-2.2003 method H2. This section proposed by the People's Republic of China Ministry of Information Industry. This part of the jurisdiction of the China Communications Standards Association. This part by the Sichuan Huiyuan Optical Communications Co., Ltd., Chengdu Cable Co., Ltd. Datang, Ministry of Information Industry wired communications product quality supervision Governor Inspection Center, Telecom Science and Technology Institute of the fifth draft. The main drafters of this section. Wang Zemin, Zhaoqiu Xiang, Chen Fangchun, Xue Meng Chi, Yu Chun, SONG Zhi Tacitus, when Bin. This part of the standard replaces the previous editions. a) GB/T 7425 (all parts) -1987, GB/T 8405 (all parts) -1987; b) GB/T 7424.1-1998 in Chapter 3 and Chapter 6; c) GB/T 7424.2-2002. Total cable specification Part 2. Basic optical cable test methods

1 Scope

GB/T 7424 specifies the portion of the mechanical properties of the cable, the environmental performance of each test method and the purpose of the elements, sample, equipment, Procedures and requirements. This section applies to cable GB/T 7424.1 regulations.

2 Normative references

The following documents contain provisions which, through reference to GB/T 7424 this section, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT) GB 5023.2-1997 rated voltage of 450/750V and below PVC insulated cables - Part 2. Test methods (idt IEC 60227-2. 1979) GB/T 7424.1-2003 total cable specification - Part 1. General (IEC 60794-1-1.2001, MOD) GB/T 8170 numerical rounding rules GB/T 15972.22-2008 fiber test methods - Part 22. dimensional parameters measuring methods and test procedures --- Length (IEC 60793-1-22.2001, MOD) GB/T 15972.32 fiber test methods - Part 32. Measurement methods and test procedures for mechanical properties of the coating --- Peelable (GB/T 15972.32-2008, IEC 60793-1-32.2001, MOD) GB/T 15972.46-2008 fiber test methods - Part 46. Measuring methods for transmission and optical characteristics and test Test program --- transmittance change (IEC 60793-1-46.2001, MOD) GB/T 15972.54 fiber test methods - Part 54. Environmental Performance Measurement methods and test procedures --- gamma irradiation (GB/T 15972.54-2008, IEC 60793-1-54.2003, MOD) YD/T 629 (all parts) optical fiber transmission attenuation monitoring methodology OK IEC 60544 (all parts), electrical insulating materials ion irradiation effects

3 General

3.1 Introduction Unless otherwise specified in the detail specification, each test method specified in this part of the articles of this chapter shall apply. 3.2 Test methods Format Each test method should be formatted as follows standard sequential preparation. While maintaining the overall sequence can insert additional provisions. purpose Sample equipment program ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7424.2-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7424.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7424.2-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7424.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7424.2-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7424.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.