GB/T 7218-2013 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7218-2013: Rolling bearings -- Miniature radial ball bearings with flanged outer ring -- Boundary dimensions
Status: Valid

GB/T 7218: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7218-2013	259	Add to Cart	3 days	Rolling bearings -- Miniature radial ball bearings with flanged outer ring -- Boundary dimensions	Valid
GB/T 7218-1995	399	Add to Cart	3 days	Rolling bearings. Miniature radial ball bearings with flanged outer ring. Boundary dimensions	Obsolete
GB 7218-1987	RFQ	ASK	3 days	Miniature deep groove ball bearings with flanged outer ring--Boundarg dimensions	Obsolete

Similar standards

GB/T 12765   GB/T 5859   GB/T 4663   GB/T 6930   GB/T 7217   

Basic data

Standard ID: GB/T 7218-2013 (GB/T7218-2013)
Description (Translated English): Rolling bearings -- Miniature radial ball bearings with flanged outer ring -- Boundary dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J11
Classification of International Standard: 21.100.20
Word Count Estimation: 11,166
Older Standard (superseded by this standard): GB/T 7218-1995
Quoted Standard: GB/T 272-1993; GB/T 273.3-1999; GB/T 274-2000; GB/T 5800.1-2012; GB/T 6930-2002; GB/T 7217-2013; GB/T 7811-2007; JB/T 2974-2004
Regulation (derived from): National Standards Bulletin No. 19 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies: Dimensions comply with GB/T 273. 3-1999, flange dimensions conform to GB/T 7217-2013, inner diameter of 0. 6mm-10mm, diameter series 7, 8, 9, 0, 2, 3 with and without with shields or seals miniature deep groove ball bearings with

GB/T 7218-2013: Rolling bearings -- Miniature radial ball bearings with flanged outer ring -- Boundary dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings. Miniature radial ball bearings with flanged outer ring. Boundary dimensions ICS 21.100.20 J11 National Standards of People's Republic of China Replacing GB/T 7218-1995 Rolling Miniature ball bearings to the outer flange dimensions Rolingbearings- Issued on. 2013-09-18 2014-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 7218-1995 "to miniature ball bearings with flanged outer ring rolling bearing dimensions", and GB/T 7218- Compared to 1995, the main technical changes are as follows. --- Remove the dust cover schematic structure bearing the legend to legend (see Figures 1 and 2, 1995 edition of Figures 1 and 2); --- Increasing the size of series 17 and 18 with a dust cover flange outer deep groove ball bearing dimensions (see Tables 1 and 2); --- Series of 19,39,10,02 and increase the size of the flange of the outer ring of deep groove ball bearing with a ring of 03 dimensions (see Table 5 to Table 9); --- Removed r1smin value flange outer deep groove ball bearings (see the 1995 edition of the Tables 3 to 9); --- Remove the 28 series d = 3mm flange outer deep groove ball bearing type and dimensions (see Table 3 of the 1995 edition). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of Rolling (SAC/TC98) centralized. This standard was drafted. Luoyang Bearing Research Institute Co., Ltd., Zhongshan City, Pacific Century Bearing Manufacturing Co., Ltd. The main drafters of this standard. Song Yucong, Chen Qingxi, Chen Taiping. This standard replaces the standards previously issued as follows. --- GB 7218-1987, GB/T 7218-1995; --- GB 7219-1987. Rolling Miniature ball bearings to the outer flange dimensions

1 Scope

This standard specifies the dimensions in line with GB/T 273.3-1999, flange dimensions conform to GB/T 7217-2013, an inner diameter of 0.6mm ~ 10mm, diameter series 7,8,9,0,2,3 with flanged outer ring and miniature deep groove ball without shields or seals bearing dimensions to And diameter series 8 and 9 with the flange of the outer ring isolated mini corner Unshuttered contact ball bearing dimensions. This standard applies to flanged outer Miniature radial ball bearing design and selection.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 272-1993 Rolling Code Method GB/T 273.3-1999 Rolling bearings dimensions, general plan GB/T 274-2000 Rolling maximum chamfer dimensions GB/T 5800.1-2012 bearings - Instrument precision bearings - Part 1. Metric series bearing dimensions, tolerances and characteristic GB/T 6930-2002 Rolling Words GB/T 7217-2013 Rolling bearings Radial ball bearings with flanged outer ring - Flange dimensions GB/T 7811-2007 Rolling Parameter Symbol Supplementary Provisions JB/T 2974-2004 Rolling Code Method

3 Terms and Definitions

Terms and definitions GB/T 6930-2002 defined apply to this document.

4 Symbol

GB/T 7811-2007 and given the following symbols apply to this document. Unless otherwise indicated, Figures 1, and the symbol shown in Tables 1 and 2 are shown in numerical 12 indicates the nominal size. B. Bearing width C1. the outer ring flange width d. bearing bore D. Bearing outside diameter D1. the outer diameter of the outer ring flange r. chamfer dimension ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7218-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7218-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7218-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7218-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7218-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7218-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.